ANTECH d.o.o.
Bosnia & Herzegovina, 76100 Brcko
Overview
About ANTECH d.o.o.
Who we are
After over ten years of professional experience in the Swiss metal industry, the owner founded the company in 2011 with headquarters in Bosnia. Because of his professional experience and the ideal location, it is possible for us to manufacture according to "Western standards" and cost-effective conditions. Your parts are manufactured machines Okuma and tested with modern measuring equipment. The machinery is ideally designed for single Split, small series and large series. Distance to the Company, which is available for download to refer to. We offer: - Turning - Combined machining (turning & milling) - Surface coatings - Heat treatments
1 / 4
2 / 4
3 / 4
4 / 4
Brcko, Bosnia & Herzegovina
Member since 2012
Employees< 5
Certificates1
Year of foundation2011
Marketing documents
Competencies
Technologies
Turning
| Technologies | Lotsize | Length | Diameter |
|---|---|---|---|
Turning | 1–500 k | 1–500 mm | 5–500 mm |
Full-range turning (including milling) | 1–500 k | 1–500 mm | 5–500 mm |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Diameter |
|---|---|---|---|---|---|
Sawing | 1–1 M | 5–800 mm | 5–250 mm | 5–250 mm | 5–250 mm |
Materials
Light metals
Aluminium and aluminium alloys
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steel
Cast metals
Cast steelCast iron
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloys
Plastics/synthetic materials
ThermoplasticsElastomers
Industries
Air conditioning, refrigeration and ventilation industryHydraulic and pneumatic industryFurniture industryMedical technologyPower generation and transmission industryMachine tool manufacturingApparatus engineeringAutomation and control engineeringConstruction and architectural suppliesDrive and gear engineeringAutomotive and vehicle constructionBuilding, agricultural and forestry machinery manufacturingSpecial purpose machinery manufacturingRailway and rail vehicles industryLighting industryMilitary engineeringMeasurement and control technique, laboratory equipmentHousehold appliance industryShipbuilding industryPrecision engineering, mechatronics and opticsChemical industryMechanical engineeringPackaging industryBoiler, container and tank construction Electrical industryOffice machinery and suppliesPlant engineering and constructionTelecommunication industryClean room technologyPaper and printing machinery industryMining and tunnel engineeringFittings engineering
Certificates
No certificates
Parts & Machines
Parts (9)
1 / 9
Lagerdeckel
DescriptionD220 x 40mm, 9SmnPb28K, brüniert
2 / 9
Lagerscheibe
DescriptionD130 x 20mm, 9SmnPb28K, brüniert
3 / 9
Lagerteil
DescriptionD30 x 55mm, 1.4305
4 / 9
Büchse
DescriptionD50 x 60 mm, 1.4305
5 / 9
Zylinder
DescriptionD150 x 90mm, 9SMnPb28K
6 / 9
Distanzscheibe
DescriptionD120 x 15mm, 9SMnPb28K, brüniert
7 / 9
Bolzen
DescriptionD30 x 80mm, CK 45
8 / 9
Welle
DescriptionD5 x 30mm, 1.4305
9 / 9
Isolierhülse
DescriptionD10 x 18mm, PTFE
Machinery (3)
1 / 3
Okuma LB 15 M
ManufacturerOkuma
ControlOkuma Dialog
Technology
Turning
2 / 3
Okuma LB 15
ManufacturerOkuma
ControlOkuma Dialog
Technology
Full-range turning (including milling)Turning
3 / 3
Forte
ManufacturerForte
ControlAutomat
9 Parts
3 Machinery
Turning2
Full-range turning (including milling)1
Contact
Location
Main locationSemberska 35, 76100 Brcko, Bosnia & Herzegovina
Further locationsSemberska 35, 76100 Brcko (BIH)
Company contact
Contact persons
RA
Ratko Antic
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.