Buck Spritzgussteile Formenbau GmbH

Germany, 91604 Flachslanden

Overview

About Buck Spritzgussteile Formenbau GmbH

Who we are

Founded in 1985 Certified according to TS 16949:02 Audit according to DIN EN ISO 14001:2005 Technical advice for the development of cost-effective and tool fair injection moulded parts Project management, for each of your products you will have a competent person to turn to in our company Construction of process-safe injection moulding and punching tools on the premises Samples as per PPAP Level 1 to 5 and VDA 6.1 Establishing of initial samples test certificates according to VDA script vol. 2, fig. 3 Own toolmaking in case optimizing is required on your injection moulding tools Favourable auxiliary tools, good pre-series tools, process-safe serial tools and high-quality punching tools Takeover of existing tools is possible 35 Precision injection moulding machines with a locking pressure from 15t to 250t Precision injection moulded parts from 0,01g to 400g Two-component injection moulding Precision plastic parts with insert parts from Germany and Czech Republic Round-injecting of artificial leather High-quality articles with Tampon-Print lettering Cost-effective assembly of modular parts Last but not least, 90 employees who will be reliably working for you

Flachslanden, Germany

Member since 2007

Employees100 - 200

Certificates3

Turnover10 - 20 Mil.

Year of foundation1985

Marketing documents

Zertifikat IATF 16949 engl.Zertifikat IATF 16949 deutsch Zertifikat ISO 9001 engl.Zertifikat ISO 9001 deutsch Zertifikat ISO 14001 deutsch Zertifikat ISO 14001 engl.

Competencies

Technologies

Injection Moulding, Extruding

Technologies	Lotsize	Length	Width	Height	Weight
Injection moulding	1–20 M	0.1–790 mm	0.1–720 mm	0.1–950 mm	0–0.4 kg
Injection-mould around inserts	1–20 M	0.1–790 mm	0.1–720 mm	0.1–950 mm	0–0.4 kg
Multi component injection moulding	1–90 M	1–450 mm	1–450 mm	1–450 mm	0–0.094 kg

Assembly

Technologies	Weight
Mechanical assembly	0–10 kg

Mould construction

Technologies	Length	Width	Height	Weight
Injection moulds	1–600 mm	1–596 mm	1–796 mm	0–2,000 kg

Labelling / marking

Technologies	Lotsize	Length	Width
Pad printing	1–1 M	1–1,000 mm	1–1,000 mm

Materials

Steel

Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel

Plastics/synthetic materials

ThermoplasticsAcrylic (PMMA)High performance plasticElastomersNatural and vulcanised rubberGlass fibre-reinforced plasticCarbon fibre-reinforced plasticParticle reinforced composite materialsNatural Fibre Composites (NFC)

Cast metals

Cast steelCast iron

Light metals

Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys

Heavy metals

Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloysSolder

Industries

Chemical industryLighting industryMining and tunnel engineeringFittings engineeringAutomation and control engineeringConstruction and architectural suppliesMedical technologyAutomotive and vehicle constructionDrive and gear engineeringSpecial purpose machinery manufacturingTelecommunication industryShipbuilding industryRailway and rail vehicles industryOffice machinery and suppliesPlant engineering and constructionPower generation and transmission industryApparatus engineeringClean room technologyPaper and printing machinery industryMilitary engineeringMeasurement and control technique, laboratory equipmentMechanical engineeringAerospace and aviation industryBoiler, container and tank construction Air conditioning, refrigeration and ventilation industryInformation technology (hardware)Hydraulic and pneumatic industryHousehold appliance industryPackaging industryFurniture industryBuilding, agricultural and forestry machinery manufacturingElectrical industryPrecision engineering, mechatronics and opticsMachine tool manufacturing

+26 moreShow less