Cebes a.s.

Czech Republic, 76331 Brumov-Bylnice

Overview

About Cebes a.s.

Who we are

The CEBES a.s.company was established in 1999 and with a considerable portion of its production it carries on a tradition of more than 60 years in manufacturing commutators, brush holders and slip rings at MEZ Brumov Company. The company also carries out repair of commutators, brush holders and slip rings. The CEBES a.s. company has implemented and operates an Integrated Management System. The company holds certificates for both the ISO 9001 Quality Management System and ISO 14001 Environmental Management System.

1 / 1

Brumov-Bylnice, Czech Republic

Member since 2010

Employees100 - 200

Certificates3

Turnover5 - 10 Mil.

Year of foundation1999

Competencies

Technologies

Turning

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Turning	1–100 k	1–1,000 mm	—	—	3–1,200 mm	—
Automatic turning (bar)	1–100 k	1–1,000 mm	—	—	3–1,200 mm	—
Swiss turning	1–100 k	1–150 mm	—	—	3–44 mm	—
Hard turning	1–1,200	1–1,000 mm	—	—	3–1,200 mm	—
Broaching	1–10,000	1–250 mm	—	—	20–800 mm	—
Deep-hole drilling	1–100 k	10–500 mm	10–800 mm	10–600 mm	10–600 mm	0–600 kg
Shaft machining	1–10,000	1–950 mm	—	—	3–500 mm	0–1,100 kg

Welding

Technologies	Lotsize	Length	Width	Height	Diameter	Weight	Material thickness
Inert gas shielded arc welding (MIG/MAG)	1–1,000	10–1,000 mm	10–1,000 mm	10–1,000 mm	10–1,000 mm	0–4,000 kg	1–20 mm
Inert gas shielded arc welding (TIG)	1–1,000	10–1,000 mm	10–1,000 mm	10–1,000 mm	10–1,000 mm	0–4,000 kg	1–5 mm
Manual electrode welding	1–1,000	10–1,000 mm	10–1,000 mm	10–1,000 mm	10–1,000 mm	0–4,000 kg	1–50 mm
Electron-beam welding	1–1,000	10–1,000 mm	10–1,000 mm	10–1,000 mm	—	0–4,000 kg	—

Assembly

Technologies	Weight
Mechanical assembly	0–500 kg
Electromechanical assembly	0–500 kg

Measuring & Testing

Technologies	Length	Width	Height	Diameter	Weight
Measuring / testing	0.1–100 mm	0.1–800 mm	0.1–700 mm	0.1–800 mm	0–800 kg

Wire & Spring Bending

Technologies	Lotsize	Diameter
Spring bending	1–1,000	3–50 mm

Injection Moulding, Extruding

Technologies	Lotsize	Length	Width	Height	Weight
Injection-mould around inserts	1–100 k	5–60 mm	5–100 mm	5–100 mm	0–1 kg
Compression moulding	1–100 k	5–100 mm	5–400 mm	5–400 mm	0–5 kg

Milling

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Milling	1–100 k	10–500 mm	10–800 mm	10–600 mm	—	0–600 kg
HSC milling	1–100 k	10–500 mm	10–800 mm	10–600 mm	—	0–600 kg
Engraver milling	1–100 k	10–500 mm	10–800 mm	10–600 mm	10–600 mm	0–600 kg

Surface Treatment

Technologies	Lotsize	Length	Width	Height	Diameter	Weight	Material thickness
Chromatizing	1–10,000	3–2,300 mm	3–320 mm	3–800 mm	—	0–150 kg	—
Electroplating	1–10,000	3–2,300 mm	3–320 mm	3–800 mm	—	0–150 kg	—
Nickel plating	1–10,000	2–1,200 mm	2–350 mm	2–1,000 mm	—	0–40 kg	—
Galvanizing	1–10,000	3–2,300 mm	3–350 mm	3–800 mm	3–800 mm	0–150 kg	0.1–100 mm

Drilling / Sawing

Technologies	Lotsize	Length	Width	Height	Diameter
Sawing	1–100 k	5–1,500 mm	3–500 mm	3–500 mm	3–500 mm

Materials

Steel

Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel

Cast metals

Cast steelCast iron

Industries

Electrical industryPlant engineering and constructionMechanical engineeringPower generation and transmission industry

Certificates

ISO 9001:2008

ISO 14001

DIN EN ISO 3834

Contact

Location

Main locationKloboucká 866, 76331 Brumov-Bylnice, Czech Republic

This map is hosted on Google Maps. See
privacy policy.

Company contact

Contact persons

Oldrich Konecny

Are you a supplier?
Find perfectly matching requests.

Are you a buyer?
Submit your request.