CGS S.r.l.
Italy, 40053 Castello di Serravalle Valsamoggia
Overview
About CGS S.r.l.
Who we are
CGS Srl is born as artisan company at the end of the sixties to assume, more and more, in the years a real industrial structure; currently it occupies an area of 1500 square meters where work about twenty employees. CGS manufactures a wide range of products including precision components and small parts, drawing fittings for the earthmoving industry, agricultural machinery and oleodynamic systems, as well as components ready for a wide range of industries; They complete the range of transmission organs such as angle heads and jacks and magnetic devices, solenoids and rigators. Thanks to decades of experience and the sensibility and attention for the demands of the clients, CGS Srl is able to offer personalized solutions and high quality by ensuring advice and assistance in the phase of pre-sale until delivery. The technological adjustment and the continuous search of operation models more and more to the state-of-the-art allow CGS to propose to the own clients efficient and effective solutions both beginning from the particulars present in catalog and beginning from the sketches and from the specific applications of the clients. This approach based on the support to the client and aimed to the flexibility allows CGS to affirm its own presence on the Italian and European market more and more. Turning, finishing and treatments CGS is equipped with two production units that perform all the necessary turning operations, organizing overlapping production to ensure a total daily production capacity of approximately 60,000 hours on 17 turning centers. CGS Srl is able to realize precision components with diameter between 3 and 70 mm; the worked materials embrace the whole range of the automatic steels,from reclamation, cementation and good part of the stainless further to brass, aluminium, bronze, copper and plastic materials. Finishing works CGS also has a specialized department in the following stages of finishing: - Reaming, Tumbling, Milling with No 2 vertical machining centers, Lapping, Countersink, Deburring, Surface rolling, Assembling with the possible management of commercial components or supplied by the customer, Micropunting Marking. Grinding processes The department designated about grinding works performs the following manufacturings: - Centerless and Plunge grinding with tolerance of 3-5 microns and roundness of 50% tolerance - Grinding on centers, surfaces, centerless and superfinishings where tolerances are outside of what we can obtain internally. CGS guarantees accurate control of the quality of the works implemented, and therefore of the finished detail delivered to the customer. Washing the parts with ultrasonic and vacuum technology - For all the details that need to treated, they are washed at the CGS production department, before starting the external treatment required to obtain the best result in terms of quality and efficacy of the treatment itself; - All untreated ferrous items are delivered after a suitable washing phase during which a protective substance is applied, with a guaranteed 3-month standard length, which can be extended on request.
1 / 9
2 / 9
3 / 9
4 / 9
5 / 9
6 / 9
7 / 9
8 / 9
9 / 9
Castello di Serravalle Valsamoggia, Italy
Member since 2015
Employees20 - 50
Certificates1
Turnover1 - 5 Mil.
Year of foundation2008
Competencies
Technologies
Turning
| Technologies | Lotsize | Length | Diameter | Weight |
|---|---|---|---|---|
Turning | 1,000–100,000 | 1–310 mm | 3–70 mm | — |
Automatic turning (bar) | 1,000–100,000 | 1–200 mm | 10–70 mm | — |
Swiss turning | 1,000–100,000 | 3–310 mm | 3–32 mm | — |
Full-range turning (including milling) | 1,000–100,000 | 1–310 mm | 3–70 mm | — |
Hard turning | 1,000–100,000 | 1–50 mm | 2–42 mm | — |
Broaching | 1,000–100,000 | 1–70 mm | 3–70 mm | — |
Centering / end facing | 1,000–100,000 | 1–70 mm | 3–70 mm | — |
Shaft machining | 1,000–100,000 | 1–310 mm | 3–70 mm | 0–1.5 kg |
Milling
| Technologies | Lotsize | Length | Width | Height | Diameter |
|---|---|---|---|---|---|
Full-range milling (including turning) | 1,000–100,000 | 1–300 mm | 1–120 mm | 1–80 mm | 5–120 mm |
Materials
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steel
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloys
Light metals
Aluminium and aluminium alloys
Industries
Building, agricultural and forestry machinery manufacturingAerospace and aviation industrySpecial purpose machinery manufacturingPackaging industryAutomotive and vehicle constructionRailway and rail vehicles industryAutomation and control engineeringApparatus engineeringMechanical engineeringMedical technologyPrecision engineering, mechatronics and opticsDrive and gear engineeringHydraulic and pneumatic industry
Certificates
ISO 9001:2015
Parts & Machines
Parts (15)
1 / 15
Components for farm machinery
TechnologyFull-range turning (including milling)
MaterialAluminium and aluminium alloys
Lotsize0
ComplexityMedium
IndustriesBuilding, agricultural and forestry machinery manufacturing
DescriptionComponents for farm machinery
2 / 15
Pump oil shaft for automotive sector
TechnologyFull-range turning (including milling)
MaterialCase hardening/tempering steel
Lotsize0
ComplexityMedium
IndustriesAutomotive and vehicle construction
DescriptionPump oil shaft for automotive sector
3 / 15
Combined shutter for hydraulic valve
TechnologyFull-range turning (including milling)
MaterialCase hardening/tempering steel
Lotsize0
ComplexityMedium
IndustriesHydraulic and pneumatic industry
DescriptionCombined shutter for hydraulic valve
4 / 15
Reducer shafts for naval sector
TechnologyShaft machining
MaterialCase hardening/tempering steel
Lotsize0
ComplexityMedium
IndustriesMechanical engineering
DescriptionReducer shafts for naval sector
5 / 15
Copper spare parts for laser cutting systems
TechnologyFull-range turning (including milling)
MaterialCopper and copper alloys
Lotsize0
ComplexityMedium
IndustriesSpecial purpose machinery manufacturing
DescriptionCopper spare parts for laser cutting systems
6 / 15
Reducer screws
TechnologyFull-range turning (including milling)
MaterialCase hardening/tempering steel
Lotsize0
ComplexityMedium
IndustriesMechanical engineering
DescriptionReducer screws
7 / 15
Shutters for hydraulic valves
TechnologyHard turning
MaterialCase hardening/tempering steel
Lotsize0
ComplexityMedium
IndustriesHydraulic and pneumatic industry
DescriptionShutters for hydraulic valves
8 / 15
Maximum pressure valve
TechnologyFull-range turning (including milling)
MaterialFree-cutting/mild steel
Lotsize0
ComplexityMedium
IndustriesHydraulic and pneumatic industry
DescriptionMaximum pressure valve
9 / 15
Pumping for hydraulic piston
TechnologyFull-range turning (including milling)
MaterialStructural steel
Lotsize0
ComplexityMedium
IndustriesHydraulic and pneumatic industry
DescriptionPumping for hydraulic piston
10 / 15
Hydraulic parts
TechnologyHard turning
MaterialCase hardening/tempering steel
Lotsize0
ComplexityMedium
IndustriesHydraulic and pneumatic industry
Descriptiond.8 grinded parts, round 0.03
11 / 15
Spool
TechnologyHard turning
MaterialCase hardening/tempering steel
Lotsize0
ComplexityMedium
IndustriesHydraulic and pneumatic industry
12 / 15
Retainers
TechnologyFull-range turning (including milling)
MaterialFree-cutting/mild steel
Lotsize0
ComplexityMedium
IndustriesHydraulic and pneumatic industry
13 / 15
Safety valve
TechnologyHard turning
MaterialCase hardening/tempering steel
Lotsize0
ComplexityMedium
IndustriesHydraulic and pneumatic industry
14 / 15
Pneumatic valve
TechnologyFull-range turning (including milling)
MaterialCopper-zinc alloys (brass)
Lotsize0
ComplexityMedium
IndustriesHydraulic and pneumatic industry
15 / 15
Joint for air-conditioning sector
TechnologyFull-range turning (including milling)
MaterialCopper-zinc alloys (brass)
Lotsize0
ComplexityLow
IndustriesMechanical engineering
Machinery (18)
1 / 18
NEXTURN SA 32PII 7 assi DMAX 32
ManufacturerNEXTURN
ControlControllo a campione
Year of Construction2018
Technology
Swiss turningAutomatic turning (bar)Full-range turning (including milling)
2 / 18
HWACHEON HI-TECH 100 B 3 assi DMAX 42
ManufacturerHWACHEON
ControlControllo a campione
Year of Construction2004
Technology
Automatic turning (bar)
3 / 18
GILDEMEISTER-GRAZIANO TWIN 70 8 assi DMAX 70
ManufacturerGILDEMEISTER
ControlControllo a campione
Year of Construction2003
Technology
Full-range turning (including milling)Automatic turning (bar)
4 / 18
HWACHEON HI-TECH 200 B 3 assi DMAX 65
ManufacturerHWACHEON
ControlControllo a campione
Year of Construction2004
Technology
Automatic turning (bar)
5 / 18
STAR SB 20 8 assi DMAX 20
ManufacturerSTAR
ControlControllo a campione
Year of Construction2018
Technology
Full-range turning (including milling)Swiss turningAutomatic turning (bar)
6 / 18
STAR SB 20 8 assi DMAX 20
ManufacturerSTAR
ControlControllo a campione
Year of Construction2017
Technology
Full-range turning (including milling)Automatic turning (bar)Swiss turning
7 / 18
NEXTURN SA 32E 8 assi DMAX 32
ManufacturerNEXTURN
ControlControllo a campione
Year of Construction2011
Technology
Automatic turning (bar)Swiss turningFull-range turning (including milling)
8 / 18
STAR SB 32 8 assi DMAX 32
ManufacturerSTAR
ControlControllo a campione
Year of Construction2003
Technology
Swiss turningAutomatic turning (bar)Full-range turning (including milling)
9 / 18
STAR SB 32 8 assi DMAX 32
ManufacturerSTAR
ControlControllo a campione
Year of Construction2003
Technology
Swiss turningAutomatic turning (bar)Full-range turning (including milling)
10 / 18
STAR SB 16 D 8 assi DMAX 16
ManufacturerSTAR
ControlControllo a campione
Year of Construction2007
Technology
Automatic turning (bar)Swiss turningFull-range turning (including milling)
11 / 18
STAR SB 16 D 8 assi DMAX 16
ManufacturerSTAR
ControlControllo a campione
Year of Construction2007
Technology
Automatic turning (bar)Full-range turning (including milling)Swiss turning
12 / 18
GILDEMEISTER GLD 25 6 assi DMAX 25
ManufacturerGILDEMEISTER
ControlControllo a campione
Year of Construction2002
Technology
Swiss turningAutomatic turning (bar)Full-range turning (including milling)
13 / 18
CITIZEN K16 7 assi DMAX 16
ManufacturerCITIZEN
ControlControllo a campione
Year of Construction2002
Technology
Automatic turning (bar)Swiss turningFull-range turning (including milling)
14 / 18
QUICK-TECH 42 ULTIMATE I 10 assi DMAX 42
ManufacturerQUICK-TECH
ControlControllo a campione
Year of Construction2013
Technology
Full-range turning (including milling)Automatic turning (bar)
15 / 18
GILDEMEISTER SPEED 32-10 Linear 10 assi DMAX 32
ManufacturerGILDEMEISTER
ControlControllo a campione
Year of Construction2008
Technology
Automatic turning (bar)Full-range turning (including milling)Swiss turning
16 / 18
QUICK-TECH 42 TT 8 assi DMAX 42
ManufacturerQUICK-TECH
ControlControllo a campione
Year of Construction2015
Technology
Automatic turning (bar)Full-range turning (including milling)
17 / 18
QUICK-TECH 42 ULTIMATE I 10 assi DMAX 42
ManufacturerQUICK-TECH
ControlControllo a campione
Year of Construction2016
Technology
Automatic turning (bar)Full-range turning (including milling)
18 / 18
NEXTURN NST 56 12 assi DMAX 56
ManufacturerNEXTURN
ControlControllo a campione
Year of Construction2014
Technology
Automatic turning (bar)Full-range turning (including milling)
15 Parts
Full-range turning (including milling)10
Shaft machining1
Hard turning4
18 Machinery
Swiss turning11
Automatic turning (bar)18
Full-range turning (including milling)16
Contact
Location
Main locationVia dell'Agricoltura, 196-198, 40053 Castello di Serravalle Valsamoggia, Italy
Further locationsI-40053 - Valsamoggia località Castello di Serravalle (Bologna)
Company contact
Contact persons
CF
Claudia Fontan
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.