Daniel Emmig Stanzwerkzeug und Lohnarbeit
Germany, 26817 Rhauderfehn
Overview
About Daniel Emmig Stanzwerkzeug und Lohnarbeit
Who we are
“Our roots in toolmaking — your future in contract manufacturing” We have been specialists in punching tools for many years — precision and quality are our DNA. On this basis, we are taking the next step: From now on, we will also take over your contract manufacturing. Whether prototype, small series or series production — you benefit from our specialization in toolmaking and from a partner who understands manufacturing down pat. Rely on proven experience — in punching tools and contract manufacturing.
1 / 10
2 / 10
3 / 10
4 / 10
5 / 10
6 / 10
7 / 10
8 / 10
9 / 10
10 / 10
Rhauderfehn, Germany
Member since 2025
Employees< 5
Certificates1
Turnover< 1 Mil.
Competencies
Technologies
Turning
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Turning | 100–1,000 | 100–1,000 mm | — | — | 50–200 mm | — |
Automatic turning (bar) | 10,000–500,000 | from 800 mm | — | — | 50–100 mm | — |
Swiss turning | 50–500 | from 30 mm | — | — | from 10 mm | — |
Full-range turning (including milling) | 1–100 | 1–100 mm | — | — | 10–250 mm | — |
Hard turning | 1–100 | 10–350 mm | — | — | 3–250 mm | — |
Broaching | 1–2 | 1–2 mm | — | — | 1–2 mm | — |
Deep-hole drilling | 1–100 | 1–300 mm | 1–20 mm | 1–20 mm | 10–200 mm | 0–100 kg |
Centering / end facing | 1–100 | 3–1,200 mm | — | — | 3–250 mm | — |
Shaft machining | 1–2,500 | 3–1,200 mm | — | — | 3–250 mm | 0–80 kg |
Cutting dies / deep drawing dies
| Technologies | Length | Width | Height | Weight |
|---|---|---|---|---|
Punching / Cutting tools | 15–180 mm | 3–180 mm | 15–180 mm | 0–30 kg |
Follow-on composite tools | 1–2 mm | 1–2 mm | 1–2 mm | 0–2 kg |
Fineblanking tools | 3–180 mm | 5–180 mm | 5–180 mm | 0–100 kg |
Deep-drawing dies | 1–2 mm | 1–2 mm | 1–21 mm | 0–1 kg |
Trimming | 1–2 mm | 1–2 mm | 1–2 mm | 0–100 kg |
Die replacement / wearing part manufacturing | — | — | — | — |
Impact extrusion dies | 1–2 mm | 1–2 mm | 1–2 mm | 0–10 kg |
Embossing / swage dies | 1–2 mm | 1–2 mm | 1–2 mm | 0–10 kg |
Rod extrusion dies | 1–2 mm | 1–2 mm | 1–2 mm | 0–10 kg |
Mechanical Engineering
| Technologies | Lotsize | Length | Width | Height | Weight |
|---|---|---|---|---|---|
Mechanical engineering | 4–1,500 | 3–500 mm | 3–500 mm | 3–250 mm | 0–80 kg |
Hydraulic engineering | 1–500 | 1–300 mm | 1–300 mm | 5–250 mm | 0–80 kg |
Pneumatic engineering | 1–500 | 1–500 mm | 1–500 mm | 1–500 mm | 0–80 kg |
Apparatus engineering | 1–500 | 1–500 mm | 1–200 mm | 1–250 mm | 0–80 kg |
Tool building | 1–500 | 1–2 mm | 1–2 mm | 1–2 mm | 0–2 kg |
Handling technology | 1–500 | 1–2 mm | 1–2 mm | 1–2 mm | 0–80 kg |
Assembly
| Technologies | Weight |
|---|---|
Mechanical assembly | 0–100 kg |
Electromechanical assembly | 0–100 kg |
Industrial / On-site-assembly | 0–500 kg |
Machining (Plastics & Rubber)
| Technologies | Lotsize | Length | Width | Height | Diameter |
|---|---|---|---|---|---|
Turning | 1–500 | 3–1,200 mm | — | — | 3–250 mm |
Automatic turning (bar) | 50–2,500 | 3–1,200 mm | — | — | 10–60 mm |
Full-range turning (including milling) | 100–1,000 | 100–1,000 mm | — | — | 50–200 mm |
Milling | 1–500 | 1–520 mm | 1–350 mm | 5–250 mm | — |
Form milling (3 D) | 1–2 | 1–2 mm | 1–2 mm | 1–2 mm | — |
Milling
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Milling | 100–1,000 | 500–3,000 mm | 250–1,000 mm | 100–500 mm | — | — |
5-axis milling machines | 1–10 | 0–500 mm | 0–250 mm | 0–100 mm | — | — |
Form milling (3 D) | 1–10 | 0–500 mm | 0–250 mm | 0–100 mm | — | — |
Full-range milling (including turning) | 1–2,000 | 3–1,200 mm | 3–700 mm | 3–400 mm | 3–250 mm | — |
HSC milling | 1–1,000 | 1–100 mm | 1–100 mm | 1–100 mm | — | 0–100 kg |
Deep-hole drilling | 1–100 | 1–300 mm | 1–10 mm | 1–10 mm | 3–200 mm | 0–50 kg |
Ultrasonic milling | 1–2 | 1–2 mm | 1–2 mm | 1–2 mm | — | 0–2 kg |
Engraver milling | 1–2 | 1–2 mm | 1–2 mm | 1–2 mm | 3–4 mm | 0–10 kg |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Deep-hole drilling | 1–500 | 1–300 mm | 1–2 mm | 1–2 mm | 5–200 mm | 0–50 kg |
Ultrasonic drilling | 1–2 | 1–2 mm | 1–2 mm | 1–2 mm | — | 0–20 kg |
Sawing | 1–2,000 | 10–6,000 mm | 10–250 mm | 1–330 mm | 10–330 mm | — |
Drilling / threading / tapping | 1–500 | 10–350 mm | 10–11 mm | 10–11 mm | — | 0–50 kg |
Materials
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloysSolder
Cast metals
Cast steelCast iron
Plastics/synthetic materials
ThermoplasticsAcrylic (PMMA)High performance plasticThermosetsElastomersSilocone (LSR)Natural and vulcanised rubberGlass fibre-reinforced plasticCarbon fibre-reinforced plasticParticle reinforced composite materialsWood-Plastic-Composites (WPC)Natural Fibre Composites (NFC)
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel
Industries
Machine tool manufacturing
Certificates
No certificates
Contact
Location
Main locationIm Gewerbegebiet 13, 26817 Rhauderfehn, Germany
Company contact
Contact persons
DE
Daniel Emmig
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.