Engesser Präzisionsdrehteile GmbH & Co. KG
Germany, 78073 Bad Dürrheim-Sunthausen
Overview
About Engesser Präzisionsdrehteile GmbH & Co. KG
Who we are
Our company was founded in 1960 by Edgar and Edwin Engesser. From the outset, it is our endeavor to offer our customers maximum reliability and utility. Therefore, it is no coincidence that we can already look back on a very long relationship with many customers. Edgar Engesser was over 40 years always competent partner of our customers. During this time he put our company on a solid foundation on which we can safely grow today. With Arno Engesser 1998 is already the third Generation occurred in the management. Thus, a continuity is guaranteed in our development, which ultimately affects the satisfaction of our customers positive. His thorough training as a toolmaker and then as a graduate engineer of precision engineering ensures that our customers expert advice on the pure turning out. Today we are proud that we form with our approximately 10 employees a team in which everyone knows exactly where and when it is to tackle. We are convinced that these are the most important factors to be able to inspire customers. The constant focus on the needs of our customers and aim to provide reliable and best performance to satisfy demanding customers happy, we have sound to today's performance since 1960 and allow future-oriented growth.
1 / 1
Bad Dürrheim-Sunthausen, Germany
Member since 2004
Employees10 - 20
Certificates1
Turnover1 - 5 Mil.
Year of foundation1960
Competencies
Technologies
Turning
| Technologies | Lotsize | Length | Diameter |
|---|---|---|---|
Turning | 100–1 M | 1–200 mm | 1–22 mm |
Automatic turning (bar) | 100–1 M | 1–200 mm | 1–22 mm |
Swiss turning | 100–1 M | 1–200 mm | 1–22 mm |
Full-range turning (including milling) | 100–1 M | 1–200 mm | 1–22 mm |
Materials
Cast metals
Cast steelCast iron
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Plastics/synthetic materials
ThermoplasticsThermosetsElastomersSilocone (LSR)Natural and vulcanised rubberGlass fibre-reinforced plasticCarbon fibre-reinforced plasticParticle reinforced composite materialsWood-Plastic-Composites (WPC)Natural Fibre Composites (NFC)
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloys
Industries
Furniture industryAerospace and aviation industryPackaging industryMedical technologyInformation technology (hardware)Telecommunication industryChemical industryApparatus engineeringSpecial purpose machinery manufacturingHydraulic and pneumatic industryMilitary engineeringShipbuilding industryOffice machinery and suppliesRailway and rail vehicles industryElectrical industryPrecision engineering, mechatronics and opticsClean room technologyConstruction and architectural suppliesAutomation and control engineeringAir conditioning, refrigeration and ventilation industryPower generation and transmission industryBuilding, agricultural and forestry machinery manufacturingPlant engineering and constructionAutomotive and vehicle constructionFittings engineeringLighting industryBoiler, container and tank construction Machine tool manufacturingMechanical engineeringMining and tunnel engineeringHousehold appliance industryMeasurement and control technique, laboratory equipmentPaper and printing machinery industryDrive and gear engineering
Certificates
ISO 9001:2015
Contact
Location
Main locationDonaustraße 10, 78073 Bad Dürrheim-Sunthausen, Germany
Company contact
Contact persons
AE
Arno Engesser
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.