Ferdinand Erlmann Werkzeugbau GmbH & Co.
Germany, 45699 Herten
Overview
About Ferdinand Erlmann Werkzeugbau GmbH & Co.
Who we are
We are the leading manufacturer of manual and fully automatic operating
Multispindle Drilling and Grinding Machines for Brake linings and Clutch facings
For more than 50 years our products have been valued by the major friction material producers world-wide.
The company has been founded in 1955 by the Engineer Ferdinand Erlmann. Due to his former activities he had best contacts to the Brake Lining and Clutch Facing Industry in Germany so that he could get a good overlook of their requirements.
He developed efficient production technology for drilling of brake linings and clutch facings. To fulfil the demand of our customers he designed as well Hand Drilling Jigs for a low production rate as automatically working machines for economic drilling of big runs.
In 1972 Ferdinand Erlmann incorporated a partnership with Rolf Stratmann and in 1987 he retired. Rolf Stratmann assumes the complete participations. 2007, 65 years old, he assigned the company to
Dipl. Ing. Gerd Schorn and he continue the business.
Beside of our standard machinery program several special purpose machines have been built according to the requirements of our clients. Our Engineering department persistently develops the machines with high-precision components according to the newest technology. The requested quality regulations for the original equipment of the most important motorcar and axle producers as DAIMLER CHRYSLER, VW, GENERAL MOTORS, DAF, DANA, BERGISCHE ACHSEN, MAN, MERITOR, ROCKWELL, SCANIA, FRUEHAUF, LEYLAND, VOLVO, PEGASO, KAESSBOHRER, IVECO a. s. o. will be completely fulfilled.
As producer of high quality machinery on a small and specialised market a personalised service to our customers is the first priority for us.
1 / 8
2 / 8
3 / 8
4 / 8
5 / 8
6 / 8
7 / 8
8 / 8
Herten, Germany
Member since 2007
Employees20 - 50
Turnover5 - 10 Mil.
Year of foundation1955
Marketing documents
Competencies
Technologies
Turning
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Full-range turning (including milling) | 10–100 | 10–1,200 mm | — | — | 20–100 mm | — |
Deep-hole drilling | 10–100 | 1–400 mm | 1–700 mm | 1–600 mm | 1–20 mm | 0–300 kg |
Milling
| Technologies | Lotsize | Length | Width | Height | Weight |
|---|---|---|---|---|---|
Milling | 10–100 | 50–700 mm | 20–560 mm | 20–560 mm | 0–500 kg |
5-axis milling machines | 10–100 | 20–700 mm | 20–560 mm | 20–560 mm | 0–500 kg |
Form milling (3 D) | 10–100 | 50–2,600 mm | 20–700 mm | 20–450 mm | 0–500 kg |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Drilling / threading / tapping | 25–5,000 | 50–700 mm | 20–560 mm | 20–560 mm | from 0 mm | 0–500 kg | from 0 mm |
Materials
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel
Heavy metals
Copper-zinc alloys (brass)
Cast metals
Cast steelCast iron
Industries
Electrical industryInformation technology (hardware)Aerospace and aviation industryMedical technologyFurniture industrySpecial purpose machinery manufacturingMachine tool manufacturingMilitary engineeringPrecision engineering, mechatronics and opticsShipbuilding industryRailway and rail vehicles industryPackaging industryAir conditioning, refrigeration and ventilation industryAutomation and control engineeringFittings engineeringPlant engineering and constructionMechanical engineeringAutomotive and vehicle constructionBuilding, agricultural and forestry machinery manufacturingMining and tunnel engineeringPower generation and transmission industryBoiler, container and tank construction Hydraulic and pneumatic industryMeasurement and control technique, laboratory equipmentConstruction and architectural suppliesLighting industryChemical industryHousehold appliance industryClean room technologyDrive and gear engineeringOffice machinery and suppliesPaper and printing machinery industryTelecommunication industryApparatus engineering
Parts & Machines
Machinery (2)
1 / 2
NBH 70
ManufacturerHüller Hille
ControlSinumerik
Year of Construction1986
Technology
MillingDrilling / threading / tapping
2 / 2
CTX Beta 1250TC
ManufacturerDMG
Control-
Year of Construction2009
Technology
Full-range turning (including milling)
2 Machinery
Milling1
Drilling / threading / tapping1
Full-range turning (including milling)1
Contact
Location
Main locationHohewardstrasse 350, 45699 Herten, Germany
Further locations45699 Herten, Hohewardstrasse 350 (NRW)
Company contact
Contact persons
GS
Gerd Schorn
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.