GEBEX AG
Switzerland, 8810 Uster
Overview
About GEBEX AG
Who we are
A synonym for manufacturing custom-made plastics for industrial use
By using specific modern technologies for almost 40 years, we built synergies with our clients, and at the same time we gain important experience. Therefore, we put into effect the obtained consent with the necessary sensitivity and concentrated creativity. This way, we remain your competent partner, and we will advice you competently and objectively. We work on thermoplastic materials out of which we manufature individual, complex or simple pieces of plastics for industrial use, from special orders to mass production. In our workshop, the following production processes are executed with modern machines and a lot of know-how: two- and three-dimensional distorsion without cutting (removing edges and bending), gluing, welding, printing and hot printing, As well as plastic-cutting producing processes like sawing,CNC-milling with up to 5 axes, CNC-turning with
up to 6 axes and NC-polish-milling
We work on thermoplastic materials like:
- PM MA- PA- PI - POM - POM-C - PC - PTFE - PVDF - PCTFE - PETP - PAI- PEEK - PES - PVC hard - PP - PE - PPO
1 / 1
Uster, Switzerland
Member since 2007
Employees10 - 20
Certificates1
Turnover1 - 5 Mil.
Year of foundation1969
Competencies
Technologies
Turning
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Turning | 5–20,000 | 1–200 mm | from 0 mm | from 0 mm | 2–400 mm | from 0 kg | from 0 mm |
Joining (Plastics & Rubber)
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Hot plate / Heated tool welding | 1–500 | from 0 mm | from 0 mm | from 0 mm | from 0 mm | 0–2 kg | from 0 mm |
Milling
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Milling | 1–10,000 | 2–500 mm | 2–200 mm | 2–200 mm | from 0 mm | 0–2 kg | from 0 mm |
Form milling (3 D) | 1–10,000 | 2–500 mm | 2–200 mm | 2–200 mm | from 0 mm | 0–2 kg | from 0 mm |
HSC milling | 1–10,000 | 2–500 mm | 2–200 mm | 2–200 mm | from 0 mm | 0–2 kg | from 0 mm |
Materials
Plastics/synthetic materials
ThermoplasticsThermosetsGlass fibre-reinforced plasticCarbon fibre-reinforced plasticParticle reinforced composite materials
Industries
Clean room technologyElectrical industryInformation technology (hardware)Medical technologyAutomotive and vehicle constructionHydraulic and pneumatic industryAerospace and aviation industryApparatus engineeringPrecision engineering, mechatronics and opticsMeasurement and control technique, laboratory equipmentChemical industry
Certificates
ISO 9001:2015
Parts & Machines
Parts (3)
1 / 3
Gebex AG
TechnologyFull-range turning (including milling)
MaterialHigh performance plastic
Dimensions
Length50 mm
Diameter28 mm
ComplexityMedium
2 / 3
Gebex AG
TechnologyMilling
MaterialPlastics/synthetic materials
Dimensions
Length74 mm
Width48.5 mm
Height8 mm
ComplexityMedium
3 / 3
Gebex AG
TechnologyMilling
MaterialPlastics/synthetic materials
Dimensions
Height23 mm
Width42 mm
Length61 mm
ComplexityMedium
3 Parts
Full-range turning (including milling)1
Milling2
Contact
Location
Main locationRosenstrasse 3, 8810 Uster, Switzerland
Company contact
Contact persons
MH
Mario Hartmann
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.