H. V. Rieble Metallwaren e.K.
Germany, 64546 Mörfelden-Walldorf
Overview
About H. V. Rieble Metallwaren e.K.
Who we are
pressing, stamping and deep-drawing of metal parts in high quantities, pressing up to forces of 2.500 kN, material mild or normal steel, galvanised or electrolytically zinc plated, stainless steel or non-ferrous metals, thickness up to 10 mm, width up to 600 mm, assembly groups, surface coatings, laser-beam and water-jet cutting
Mörfelden-Walldorf, Germany
Member since 2003
Employees5 - 10
Certificates2
Turnover1 - 5 Mil.
Year of foundation1976
Competencies
Technologies
Sheet Metal Forming (Stamping, Deep-drawing)
| Technologies | Lotsize | Length | Width | Material thickness |
|---|---|---|---|---|
Punching / pressing (Out-of-tool) | 1–100 k | 2–2,000 mm | 10–600 mm | 0.1–10 mm |
Sheet Metal Processing
| Technologies | Lotsize | Material thickness |
|---|---|---|
Shearing (rectangular blank/strip) | 1–10,000 | 0.3–3 mm |
Materials
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloys
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Industries
Military engineeringFurniture industryApparatus engineeringHousehold appliance industryElectrical industryConstruction and architectural suppliesOffice machinery and suppliesLighting industryAutomotive and vehicle constructionInformation technology (hardware)
Certificates
ISO 9001:2015
ISO 9001:2008
Parts & Machines
Machinery (6)
1 / 6
ITP-S 8025
ManufacturerAmada
ControlDA-58-3-Achsen
Year of Construction1991
2 / 6
Promecam GTH 425
ManufacturerAmada
Control-
Year of Construction1982
Technology
Shearing (rectangular blank/strip)
3 / 6
ExP 100 RF/HK
ManufacturerMüller Gefrees
Control-
Year of Construction1985
Technology
Punching / pressing (Out-of-tool)
4 / 6
ExP 80 RF/HK
ManufacturerMüller Gefrees
Control-
Year of Construction1988
Technology
Punching / pressing (Out-of-tool)
5 / 6
HPC 160 "Formmaster"
ManufacturerWanzke
Control-
Year of Construction1988
Technology
Punching / pressing (Out-of-tool)
6 / 6
HPV 250 "Formmaster"
ManufacturerWanzke
Control-
Year of Construction1990
Technology
Punching / pressing (Out-of-tool)
6 Machinery
Shearing (rectangular blank/strip)1
Punching / pressing (Out-of-tool)4
Contact
Location
Main locationDreieichstraße 7 a, 64546 Mörfelden-Walldorf, Germany
Further locationsD-63128 Mörfelden-Walldorf
Company contact
Contact persons
HS
Heino Santo
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.