Herbert Weiss GmbH Metallverarbeitung
Germany, 35108 Allendorf / Eder
Overview
About Herbert Weiss GmbH Metallverarbeitung
Who we are
The company Herbert Weiss GmbH is a medium-sized family business which has existed since now almost 50 years. Our power is in mass production of turned parts. Our current scope lies in the furniture, electrical, architectural hardware, window and automotive industry. We manufacture exclusively from the coil with rotary machines. This production brings with it that we can not customize any dimension; dimensions, but fit into our range and are for us in the realm of possibility, are thus produced for our customers in high cost-effectiveness. The production takes place in a modern according to the state industrial hall covering an area of over 3,000 m2. This includes, for example, a fully automatic parts and Spänförderer, fully automatic parts-oil removal and chip disposal plant. In our production, 35 skilled workers working in the four-layer system. The current production site in the Ring Road 23 was built in 1995 and expanded to its present size in 1999. In the current production is measured every 30 minutes regularly drawing justice and documented. The documentary takes place by means of the Software and subject to continuous evaluation. For the production and timely delivery, we are always bemht to do everything humanly possible, because we are seeking a long-term business partnership with our customers. We enjoy the trust of many customers, our products worldwide without input control to their customers to provide direct (Ask for our references). We are DIN EN ISO 9001:2008 certified.
1 / 1
Allendorf / Eder, Germany
Member since 2004
Employees20 - 50
Certificates2
Turnover5 - 10 Mil.
Year of foundation1993
Competencies
Technologies
Turning
| Technologies | Lotsize | Length | Diameter |
|---|---|---|---|
Turning | 50,000–10 M | 3–120 mm | 4–12 mm |
Automatic turning (bar) | 30,000–10 M | 2–120 mm | 4–12 mm |
Full-range turning (including milling) | 50,000–10 M | 3–120 mm | 4–12 mm |
Threading
| Technologies | Lotsize | Length | Diameter |
|---|---|---|---|
Thread rolling | 50,000–10 M | 3–120 mm | 4–12 mm |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Weight |
|---|---|---|---|---|---|
Drilling / threading / tapping | 30,000–10 M | 2–150 mm | 3–10 mm | 3–10 mm | 0–0.08 kg |
Materials
Steel
Free-cutting/mild steel
Industries
Power generation and transmission industryPaper and printing machinery industryShipbuilding industryMechanical engineeringAir conditioning, refrigeration and ventilation industryHousehold appliance industryPrecision engineering, mechatronics and opticsRailway and rail vehicles industryElectrical industryAerospace and aviation industryApparatus engineeringMeasurement and control technique, laboratory equipmentSpecial purpose machinery manufacturingPlant engineering and constructionAutomotive and vehicle constructionMachine tool manufacturingMilitary engineeringFittings engineeringConstruction and architectural suppliesTelecommunication industryPackaging industryAutomation and control engineeringHydraulic and pneumatic industryDrive and gear engineeringClean room technologyMedical technologyBuilding, agricultural and forestry machinery manufacturingBoiler, container and tank construction Information technology (hardware)Lighting industryFurniture industryOffice machinery and supplies
Certificates
ISO 9001:2015
ISO-TS 16949:2009
Parts & Machines
Machinery (1)
1 / 1
.
ManufacturerEubama
Control-
Technology
Automatic turning (bar)
1 Machinery
Automatic turning (bar)1
Contact
Location
Main locationRingstrasse 23, 35108 Allendorf / Eder, Germany
Further locations35108 Allendorf/Eder
Company contact
Contact persons
DE
Detlef Elsässer
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.