IMAS Stampi S.a.s.
Italy, 54100 Massa
Overview
About IMAS Stampi S.a.s.
Who we are
The experience of our designers guaranteeing customers the most appropriate solutions, the high specialisation of our technical staff, the use of the most advanced production technologies and the use of the best steels are the conditions that determine the excellent quality of our products and the competitiveness of our prices. A large stock of semi-finished products, the use of flexible processing cycles, a privileged and collaborative relationship with historical suppliers of steels and consumables, allows us to supplying the customer in a very timely manner. Always direct contact between our Customer Service and the customer, frequent visits to the operating sites, necessary to get to know better the real production requirements and to suggest the appropriate solutions, the awareness and willingness to put our more than fifty years of experience at the customer's disposal are the conditions that allow us to offer our customers a service excellence.
...
...
1 / 13
2 / 13
3 / 13
4 / 13
5 / 13
6 / 13
7 / 13
8 / 13
9 / 13
10 / 13
11 / 13
12 / 13
13 / 13
Massa, Italy
Member since 2025
Employees5 - 10
Certificates1
Turnover< 1 Mil.
Year of foundation1968
Competencies
Technologies
Mould construction
| Technologies | Length | Width | Height | Weight |
|---|---|---|---|---|
Injection moulds | 1–600 mm | 1–400 mm | 1–400 mm | 0–200 kg |
Sintering | 1–600 mm | 1–600 mm | 1–400 mm | 0–200 kg |
Sintering & Powder Pressing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Sintering | 1–20,000 | 1–60 mm | 1–60 mm | 1–100 mm | 1–60 mm | 0–3 kg |
Cutting dies / deep drawing dies
| Technologies | Length | Width | Height | Weight |
|---|---|---|---|---|
Punching / Cutting tools | 1–600 mm | 1–400 mm | 1–400 mm | 0–200 kg |
Follow-on composite tools | 1–600 mm | 1–600 mm | 1–400 mm | 0–200 kg |
Die replacement / wearing part manufacturing | — | — | — | — |
Embossing / swage dies | 1–600 mm | 1–600 mm | 1–400 mm | 0–200 kg |
Turning
| Technologies | Lotsize | Length | Diameter |
|---|---|---|---|
Turning | 100–1,000 | 0–100 mm | 0–200 mm |
Automatic turning (bar) | 1–500 | 0–50 mm | 10–50 mm |
Heat Treatment
Milling
| Technologies | Lotsize | Length | Width | Height |
|---|---|---|---|---|
Milling | 100–1,000 | 0–500 mm | 250–1,000 mm | 100–500 mm |
Form milling (3 D) | 100–1,000 | 0–500 mm | 250–1,000 mm | 100–500 mm |
Finishing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Surface grinding machine | 1–1,000 | 1–600 mm | 1–600 mm | 1–400 mm | — | 0–200 kg |
Coordinate jig grinding | 1–1,000 | 1–500 mm | 1–500 mm | 1–400 mm | — | 0–200 kg |
Shot blasting | 1–1,000 | 1–400 mm | 1–400 mm | 1–200 mm | — | 0–60 kg |
Profile grinding | 1–1,000 | 1–600 mm | 1–600 mm | 1–400 mm | 1–600 mm | — |
Materials
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloysSolder
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel
Plastics/synthetic materials
ThermoplasticsAcrylic (PMMA)High performance plasticThermosetsElastomersSilocone (LSR)Natural and vulcanised rubberGlass fibre-reinforced plasticCarbon fibre-reinforced plasticParticle reinforced composite materialsWood-Plastic-Composites (WPC)Natural Fibre Composites (NFC)
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Cast metals
Cast steelCast iron
Industries
Mechanical engineeringPrecision engineering, mechatronics and opticsMining and tunnel engineeringRailway and rail vehicles industrySpecial purpose machinery manufacturingApparatus engineeringBuilding, agricultural and forestry machinery manufacturingConstruction and architectural suppliesElectrical industryPower generation and transmission industryMachine tool manufacturingMilitary engineeringMedical technology
Certificates
No certificates
Parts & Machines
Parts (2)
1 / 2
Stampo per iniezione plastica
TechnologyMilling
MaterialCase hardening/tempering steel
Dimensions
Height30 mm
Length60 mm
Width600 mm
ComplexityLow
IndustriesMining and tunnel engineering
2 / 2
Kit pressatura a caldo
TechnologyCentering / end facing
MaterialSteel
Dimensions
Diameter60 mm
Length50 mm
2 Parts
Milling1
Centering / end facing1
Contact
Location
Main locationVia Tinelli 23/25, 54100 Massa, Italy
Company contact
Contact persons
PF
Pier Francesco Fiorentini
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.