.webp)
Leiko SA
Switzerland, 2544 BettlachOverview
About Leiko SA
Who we are
LEIKO SA, founded in 1962, is an innovative SME that manufactures your individual parts and small series with a lot of power and passion for perfection. The fascination lies in the diversity of our work and the quest for the highest quality — down to the smallest detail. If you're looking for a complete solution for your design, you've come to the right place. We specialize in the production of complex precise components, instruments, assemblies as well as in general tool and device manufacturing. In addition to extensive technical experience, you benefit from the absolutely discreet handling of the manufacturing principles and information provided to us. Thanks to our highly qualified and flexible employees, we are also able to fulfill express orders on time. We are proud to offer excellent customer service, convinced of the importance of a successful business relationship in our specialized industrial segment.
1 / 11
2 / 11
3 / 11
4 / 11
5 / 11
6 / 11
7 / 11
8 / 11
9 / 11
10 / 11
11 / 11
Bettlach, Switzerland
Member since 2025
Employees5 - 10
Certificates1
Turnover1 - 5 Mil.
Year of foundation1962
Competencies
Technologies
Mechanical Engineering
| Technologies | Lotsize | Length | Width | Height | Weight |
|---|---|---|---|---|---|
Mechanical engineering | 1–10,000 | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0–80 kg |
Hydraulic engineering | 1–10,000 | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0–80 kg |
Pneumatic engineering | 1–10,000 | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0–80 kg |
Apparatus engineering | 1–10,000 | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0–80 kg |
Tool building | 1–10,000 | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0–80 kg |
Handling technology | 1–10,000 | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0–80 kg |
Machining (Plastics & Rubber)
| Technologies | Lotsize | Length | Width | Height | Diameter |
|---|---|---|---|---|---|
Turning | 1–10,000 | 0.1–300 mm | — | — | 0.5–300 mm |
Automatic turning (bar) | 1–10,000 | 0.1–300 mm | — | — | 0.5–300 mm |
Full-range turning (including milling) | 1–500 k | 0–1,000 mm | — | — | from 0 mm |
Milling | 1–10,000 | 0.5–1,500 mm | 0.5–1,500 mm | 0.5–500 mm | — |
Form milling (3 D) | 1–10,000 | 0.5–250 mm | 0.5–250 mm | 0.5–300 mm | — |
Water jet cutting
| Technologies | Lotsize | Length | Width | Material thickness |
|---|---|---|---|---|
Water jet cutting 2D | from 1 | 0–1,500 mm | 0–1,500 mm | 0–15 mm |
Jigmaking
| Technologies | Length | Width | Height | Weight |
|---|---|---|---|---|
Drilling / milling jigs | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0–80 kg |
Gauges | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0–80 kg |
Measuring / testing jigs | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0–80 kg |
Assembly jigs | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0–80 kg |
Welding jigs | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0–80 kg |
Clamping devices | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0–80 kg |
Assembly
| Technologies | Weight |
|---|---|
Mechanical assembly | 0–120 kg |
Electromechanical assembly | 0–120 kg |
Industrial / On-site-assembly | 0–120 kg |
Measuring & Testing
| Technologies | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|
Measuring / testing | 0.01–1,500 mm | 0.01–1,500 mm | 0.01–500 mm | 0.01–500 mm | 0–120 kg |
Threading
| Technologies | Lotsize | Length | Diameter | Weight |
|---|---|---|---|---|
Thread rolling | 1–10,000 | 0.01–500 mm | 0.3–60 mm | — |
Thread whirling | 1–10,000 | 0.01–500 mm | 0.3–60 mm | 0–120 kg |
Surface Treatment
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Anodizing | 1–10,000 | 0.01–1,500 mm | 0.01–1,500 mm | 0.01–1,500 mm | — | 0–500 kg | — |
Pickling | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | — | 0–500 kg | — |
Blacking | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | — | 0–500 kg | — |
Chromatizing | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | — | 0–500 kg | — |
Electropolishing | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | — | — | — |
Enamelling | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | — | 0–500 kg | — |
Electroplating | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | — | 0–500 kg | — |
Plasma coating | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | 0–500 mm | 0–500 kg | — |
Rotofinishing, barrel finishing | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | — | — | — |
Powder coating | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | — | 0–500 kg | — |
Parts cleaning/degreasing | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | — | 0–500 kg | — |
Sand blasting | 1–10,000 | 0–1,000 mm | 0–1,000 mm | 0–650 mm | — | 0–80 kg | — |
Chrome-plating | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | — | 0–500 kg | — |
Nickel plating | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | — | 0–500 kg | — |
Galvanizing | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–1,500 mm | 0–500 mm | 0–500 kg | 0.004–0.015 mm |
Finishing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
External cylindrical grinding | 1–500 k | 0–1,000 mm | — | — | 0–200 mm | — |
Internal cylindrical grinding | 1–10,000 | 1–500 mm | — | — | 0.5–200 mm | — |
Centreless grinding | 1–10,000 | 1–500 mm | — | — | 0.5–200 mm | 0–40 kg |
Circular honing - internal | 1–10,000 | 0–300 mm | 0–300 mm | 0–300 mm | 0–20 mm | 0–30 kg |
Surface grinding machine | 1–10,000 | 0–2,000 mm | 0–1,000 mm | 0–500 mm | — | 0–80 kg |
Coordinate jig grinding | 1–10,000 | 0–500 mm | 0–500 mm | 0–500 mm | — | 0–80 kg |
Surface lapping | 1–10,000 | 0–80 mm | — | — | 0–80 mm | — |
Rotofinishing, barrel finishing | 1–10,000 | 0–60 mm | 0–60 mm | 0–60 mm | — | — |
Heat Treatment
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Case hardening/surface hardening | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–500 mm | 0–500 mm | 0–500 kg |
Annealing | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–500 mm | 0–500 mm | 0–500 kg |
Hardening | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–500 mm | 0–500 mm | 0–500 kg |
Nitriding processes | 1–10,000 | 0–1,500 mm | 0–1,500 mm | 0–500 mm | 0–500 mm | 0–500 kg |
Vacuum annealing | 1–10,000 | 0–1,000 mm | 0–1,000 mm | 0–380 mm | 0–600 mm | 0–500 kg |
Turning
| Technologies | Lotsize | Length | Diameter |
|---|---|---|---|
Swiss turning | 1–10,000 | from 0 mm | from 0 mm |
Full-range turning (including milling) | 1–10,000 | 0.1–300 mm | 0.5–300 mm |
Hard turning | 1–10,000 | 0.1–300 mm | 0.5–300 mm |
Assembly Group Manufacturing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Adhesive bonding | 1–10,000 | 0.5–1,000 mm | 0.5–1,000 mm | 0.5–500 mm | 0.5–60 mm | 0–120 kg | 1–200 mm |
Milling
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Milling | 1–500 k | 0–3,000 mm | 0–1,000 mm | 0–500 mm | — | — |
5-axis milling machines | 1–500 k | 0–3,000 mm | 0–1,000 mm | 0–500 mm | — | — |
Form milling (3 D) | 1–500 k | 0–3,000 mm | 0–250 mm | 0–100 mm | — | — |
Full-range milling (including turning) | 1–10,000 | 1–500 mm | 1–500 mm | 1–500 mm | 0.1–300 mm | — |
HSC milling | 1–10,000 | 0.5–250 mm | 0.5–250 mm | 0.5–300 mm | — | 0–80 kg |
Engraver milling | 1–10,000 | 0.5–250 mm | 0.5–250 mm | 0.5–250 mm | 0.5–200 mm | 0–80 kg |
Cutting dies / deep drawing dies
| Technologies | Length | Width | Height | Weight |
|---|---|---|---|---|
Die replacement / wearing part manufacturing | — | — | — | — |
Embossing / swage dies | 1–500 mm | 1–500 mm | 1–500 mm | 0–80 kg |
Additive Manufacturing
| Technologies | Lotsize | Length | Width | Height |
|---|---|---|---|---|
3D printing (general) | 1–100 | 0–150 mm | 0–150 mm | 0–150 mm |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Sawing | 1–10,000 | 5–3,000 mm | 1–400 mm | 1–400 mm | 1–400 mm | — |
Drilling / threading / tapping | 1–10,000 | 0.5–1,500 mm | 0.5–1,500 mm | 0.5–500 mm | — | 0–80 kg |
Labelling / marking
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Engraver milling | 1–10,000 | 0–1,800 mm | 0–1,800 mm | 0–500 mm | 0–1,000 mm | 0–120 kg |
Laser marking / Laser inscription | 1–10,000 | 0–800 mm | 0–800 mm | 0–650 mm | 0–800 mm | — |
Laser depth engraving | 1–10,000 | 0–800 mm | 0–800 mm | 0–650 mm | 0–800 mm | — |
Materials
Plastics/synthetic materials
ThermoplasticsAcrylic (PMMA)High performance plasticThermosetsElastomersSilocone (LSR)Natural and vulcanised rubberGlass fibre-reinforced plasticCarbon fibre-reinforced plasticParticle reinforced composite materialsNatural Fibre Composites (NFC)
Cast metals
Cast steelCast iron
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloysSolder
Industries
Measurement and control technique, laboratory equipmentPlant engineering and constructionApparatus engineeringAutomotive and vehicle constructionBuilding, agricultural and forestry machinery manufacturingRailway and rail vehicles industryElectrical industryPrecision engineering, mechatronics and opticsAerospace and aviation industryMedical technologySpecial purpose machinery manufacturingPackaging industryMachine tool manufacturing
Certificates
No certificates
Parts & Machines
Parts (9)
1 / 9
Prismagehäuse
Technology5-axis milling machines
MaterialStainless steel (rust-proof V4A)
Dimensions
Height120 mm
Length100 mm
Width100 mm
ComplexityMedium
IndustriesAutomation and control engineering
2 / 9
diverse Saugerspitzen
TechnologyFull-range turning (including milling)
MaterialStainless steel (rust-proof V2A)
Dimensions
Diameter8 mm
Length25 mm
ComplexityMedium
IndustriesAutomation and control engineering
3 / 9
Spannbügel
TechnologySpark erosion wire cutting
MaterialStainless steel (rust-proof V4A)
Dimensions
Length3 mm
Width3 mm
Height8 mm
Weight0.01 mm
ComplexityMedium
IndustriesPrecision engineering, mechatronics and optics
4 / 9
Posage
Technology5-axis milling machines
MaterialStainless steel (rust-proof V4A)
Dimensions
Height12 mm
Width40 mm
Length50 mm
ComplexityMedium
IndustriesMachine tool manufacturing
5 / 9
Posage
TechnologySurface grinding machine
MaterialCase hardening/tempering steel
Dimensions
Width50 mm
Height15 mm
Length80 mm
Weight0.1 mm
ComplexityMedium
IndustriesMechanical engineering
6 / 9
diverse Frästeile
Technology5-axis milling machines
MaterialAluminium and aluminium alloys
Dimensions
Height40 mm
Width50 mm
Length50 mm
ComplexityMedium
IndustriesAutomotive and vehicle construction
7 / 9
Uhrenplatine
TechnologyMilling
MaterialCopper-zinc alloys (brass)
Dimensions
Width30 mm
Height3 mm
Length30 mm
ComplexityHigh
8 / 9
Vorrichtung für die Uhrenindustrie
TechnologyMechanical engineering
MaterialStainless steel (rust-proof V4A)
Dimensions
Length40 mm
Height12 mm
Width40 mm
Weight0.1 mm
ComplexityHigh
IndustriesSpecial purpose machinery manufacturing
9 / 9
Käfigbrücke
TechnologySpark erosion wire cutting
MaterialTitanium and titanium alloys
Dimensions
Height1 mm
Width10 mm
Weight1 mm
Length10 mm
ComplexityHigh
Machinery (8)
1 / 8
Kern Micro Vario
ManufacturerKern Microtechnik
ControlHeidenhain
Year of Construction2024
Technology
HSC millingEngraver millingDrilling / threading / tappingMillingForm milling (3 D)MillingForm milling (3 D)5-axis milling machines
2 / 8
Hermle C20 U
ManufacturerHermle
Year of Construction2015
Technology
Form milling (3 D)MillingDrilling / threading / tapping5-axis milling machinesEngraver milling
3 / 8
Sodick ALC600G Premium
ManufacturerSodick
ControlSodick
Year of Construction2024
Technology
Mechanical engineering
4 / 8
OKUMA MX-45VAE
ManufacturerOKUMA
ControlOKUMA
Year of Construction2008
Technology
5-axis milling machinesMillingDeep-hole drillingThread rollingMechanical engineeringClamping devicesMeasuring / testing jigsMillingDrilling / threading / tapping
5 / 8
ROKU ROKU
ManufacturerROKU
ControlFANUC
Year of Construction1995
Technology
Mechanical engineeringDie replacement / wearing part manufacturingMillingMillingDrilling / threading / tappingDeep-hole drilling
6 / 8
QUASER MV204II
ManufacturerQuaser
ControlFanuc
Year of Construction2005
Technology
MillingMechanical engineeringEmbossing / swage dies Drilling / milling jigsMillingTool buildingApparatus engineeringDie replacement / wearing part manufacturing
7 / 8
SCHAUBLIN 130-CNC
ManufacturerSchaublin
ControlSiemens
Year of Construction2004
Technology
Full-range turning (including milling)Pneumatic engineeringHydraulic engineeringMechanical engineeringClamping devicesAssembly jigsMeasuring / testing jigsGaugesMillingAutomatic turning (bar)TurningThread rollingDrilling / threading / tapping
8 / 8
Sodick AQ325L
ManufacturerSodick
ControlSodick
Year of Construction2007
9 Parts
5-axis milling machines3
Full-range turning (including milling)1
Spark erosion wire cutting2
Surface grinding machine1
Milling1
Mechanical engineering1
8 Machinery
HSC milling1
Engraver milling2
Drilling / threading / tapping5
Milling10
Form milling (3 D)3
5-axis milling machines3
Mechanical engineering5
Deep-hole drilling2
Thread rolling2
Clamping devices2
Measuring / testing jigs2
Die replacement / wearing part manufacturing2
Embossing / swage dies 1
Drilling / milling jigs1
Tool building1
Apparatus engineering1
Full-range turning (including milling)1
Pneumatic engineering1
Hydraulic engineering1
Assembly jigs1
Gauges1
Automatic turning (bar)1
Turning1
Contact
Location
Main locationFöhrenweg 9, 2544 Bettlach, Switzerland
Company contact
Contact persons
PL
Pascal Leimer
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.