MALA PLUS d.o.o.

Slovenia, 8330 Metlika

Competencies

Technologies

Sheet Metal Processing

Technologies	Lotsize	Length	Width	Height	Weight	Material thickness
Laser cutting 2D	1–1,000	1–6,000 mm	1–2,000 mm	—	—	1–20 mm
Bending / folding	1–500	1–4,000 mm	—	—	—	1–20 mm
Punching / nibbling	1–500	1–3,000 mm	1–1,500 mm	—	—	0.5–3 mm
Combined forming laser cutting / punching	1–500	1–3,000 mm	1–1,500 mm	—	—	1–3 mm
Laser cutting, tube & section	1–500	1–6,000 mm	1–300 mm	1–300 mm	—	0.5–5 mm
Oxyacetylene cutting	1–1,000	1–12,000 mm	1–3,000 mm	—	0–10,000 kg	1–200 mm
Plasma fusion cutting	1–1,000	1–12,000 mm	1–3,000 mm	—	0–10,000 kg	1–60 mm
Plate rolling / bending	1–100	—	1–1,500 mm	—	—	1–15 mm
Shearing (rectangular blank/strip)	1–1,000	—	—	—	—	1–10 mm

Turning

Technologies	Lotsize	Length	Diameter
Turning	1–1 M	10–3,000 mm	10–300 mm
Automatic turning (bar)	1–1 M	1–750 mm	1–380 mm
Swiss turning	500–100,000	30–250 mm	10–85 mm
Hard turning	1–50,000	1–750 mm	1–380 mm

Welded constructions / Structural Steelwork

Technologies	Length	Width	Height	Weight
Welded constructions (weldments)	1–10,000 mm	1–6,000 mm	1–6,000 mm	0–8,000 kg
Machine frames / bases / racks	1–10,000 mm	1–6,000 mm	1–6,000 mm	0–8,000 kg

Welding

Technologies	Lotsize	Length	Width	Height	Weight
Inert gas shielded arc welding (MIG/MAG)	1–10,000	1–10,000 mm	1–10,000 mm	1–10,000 mm	0–15,000 kg
Inert gas shielded arc welding (TIG)	1–10,000	1–5,000 mm	1–5,000 mm	1–5,000 mm	0–5,000 kg
Robot welding	1–10,000	1–10,000 mm	1–10,000 mm	1–10,000 mm	0–15,000 kg

Assembly

Technologies	Weight
Mechanical assembly	0–15,000 kg
Industrial / On-site-assembly	0–15,000 kg

Milling

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Milling	100–10,000	50–3,000 mm	50–1,250 mm	50–600 mm	—	—
Deep-hole drilling	1–500	1–2,500 mm	1–950 mm	1–850 mm	1–950 mm	0–1,000 kg

Finishing

Technologies	Lotsize	Length	Width	Height	Weight
Shot blasting	1–5,000	1–12,000 mm	1–600 mm	1–600 mm	0–5,000 kg

Surface Treatment

Technologies	Lotsize	Length	Width	Height	Diameter	Weight	Material thickness
Powder coating	1–10,000	1–2,000 mm	1–2,000 mm	1–2,000 mm	—	0–5,000 kg	—
Sand blasting	1–10,000	1–12,000 mm	1–650 mm	1–650 mm	—	0–5,000 kg	—
Spray-painting	1–10,000	1–12,000 mm	1–4,500 mm	1–4,000 mm	—	0–8,000 kg	—
Galvanizing	1–10,000	1–12,000 mm	1–2,500 mm	1–4,000 mm	1–2,000 mm	0–10,000 kg	1–100 mm

Materials

Heavy metals

Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloys

Steel

Structural steelCase hardening/tempering steelFree-cutting/mild steelTool steelCold extruding steel

Industries

Power generation and transmission industryElectrical industryLighting industryDrive and gear engineeringAutomotive and vehicle constructionOffice machinery and suppliesFurniture industryApparatus engineeringMining and tunnel engineeringHousehold appliance industryMeasurement and control technique, laboratory equipmentShipbuilding industryMedical technologyAir conditioning, refrigeration and ventilation industryAutomation and control engineeringSpecial purpose machinery manufacturingPaper and printing machinery industryInformation technology (hardware)Hydraulic and pneumatic industryBuilding, agricultural and forestry machinery manufacturingMachine tool manufacturingPackaging industryMilitary engineeringAerospace and aviation industryRailway and rail vehicles industryChemical industryMechanical engineeringClean room technologyBoiler, container and tank construction Construction and architectural suppliesFittings engineeringPlant engineering and constructionTelecommunication industryPrecision engineering, mechatronics and optics

+26 moreShow less