Mechanische Werkstatt Lüpke GmbH

Germany, 12681 Berlin

Competencies

Technologies

Turning

Technologies	Lotsize	Length	Diameter
Turning	1–10,000	5–200 mm	3–200 mm
Full-range turning (including milling)	1–10,000	3–120 mm	2–150 mm

Measuring & Testing

Technologies	Length	Width	Height	Diameter	Weight
Measuring / testing	0.01–200 mm	0.01–200 mm	0.01–200 mm	1–100 mm	0–3 kg

Assembly

Technologies	Weight
Industrial / On-site-assembly	0–50 kg

Milling

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Milling	1–1,000	1–500 mm	1–1,000 mm	0.5–20 mm	—	—
5-axis milling machines	1–1,000	0–3,000 mm	0–1,000 mm	0–500 mm	—	—
Form milling (3 D)	1–100 k	1–1,000 mm	1–1,000 mm	0.5–750 mm	—	—
Full-range milling (including turning)	1–100 k	1–500 mm	1–250 mm	1–250 mm	1–250 mm	—
HSC milling	1–1,000	5–1,000 mm	5–700 mm	0.5–30 mm	—	0–30 kg
Engraver milling	1–1,000	0.5–500 mm	0.5–1,000 mm	0.5–150 mm	0.5–800 mm	0–30 kg

Machining (Plastics & Rubber)

Technologies	Lotsize	Length	Width	Height
Milling	1–100 k	1–1,000 mm	1–1,000 mm	1–800 mm
Form milling (3 D)	1–10,000	1–1,000 mm	1–1,000 mm	1–800 mm

Drilling / Sawing

Technologies	Lotsize	Length	Width	Height	Weight
Drilling / threading / tapping	1–1,000	0.05–400 mm	0.05–400 mm	0.5–200 mm	0–30 kg

Labelling / marking

Technologies	Lotsize	Length	Width	Height	Diameter
Laser marking / Laser inscription	1–1,000	1–200 mm	1–200 mm	1–200 mm	1–100 mm

Finishing

Technologies	Lotsize	Length	Width	Height
Rotofinishing, barrel finishing	1–1,000	1–50 mm	1–50 mm	1–50 mm

Materials

Cast metals

Cast steelCast iron

Light metals

Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys

Heavy metals

Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloys

Plastics/synthetic materials

ThermoplasticsThermosetsGlass fibre-reinforced plasticCarbon fibre-reinforced plasticParticle reinforced composite materialsNatural Fibre Composites (NFC)

Steel

Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelCold extruding steel

Natural materials

Wood/timber

Non-metal inorganic materials

Graphite

Industries

Measurement and control technique, laboratory equipmentLighting industryPlant engineering and constructionTelecommunication industryPrecision engineering, mechatronics and opticsMechanical engineeringPower generation and transmission industryApparatus engineeringChemical industryAerospace and aviation industryMedical technologyMining and tunnel engineeringAutomation and control engineeringSpecial purpose machinery manufacturingElectrical industryBuilding, agricultural and forestry machinery manufacturingOffice machinery and suppliesPaper and printing machinery industryAir conditioning, refrigeration and ventilation industryRailway and rail vehicles industryConstruction and architectural suppliesFittings engineeringDrive and gear engineeringAutomotive and vehicle construction

+16 moreShow less