MESSOTRON Services GmbH
Germany, 64342 Seeheim-Jugenheim
Overview
About MESSOTRON Services GmbH
Who we are
As a highly specialized manufacturer of sensors and measurement electronics with almost 50 years of experience, we have the knowledge and equipment to design and manufacture complex fine-mech components, assemblies and electronic circuits. If your project requires this knowledge, we will be happy to develop components for you and take over their manufacture. Centerless grinding / through grinding Outer diameters from ø 0.7mm to 20mm and lengths up to 3000mm Centerless grinding / bar grinding / rod grinding / tube grinding Flexible and unstable geometries such as springs, tubes, hoses, rods, etc. Materials: steel, stainless steel, titanium, cobalt-chrome, PTFE, PEEK, POM, aluminum Production of turned and milled parts Conventional turning as well as CNC turning and milling Steel, stainless steel, aluminum, brass, bronze, nickel, titanium and various plastics bar machining from 5 to 80mm diameter, 200mm in three-jaw chuck maximum turning length up to 500mm, milling parts up to 300mm x 300mm, 10kg construction and creation of 3D data and drawing derivations TIG welding manual / CNC TIG welding Manual and CNC TIG welding of steel and stainless steel Single parts up to 1000m length and part weight up to 10kg Including design and manufacture of welding gauges and auxiliary fixtures Highest quality requirements with welding approvals If required, various welding seam tests / quality tests Laser welding and laser / photon beam welding in vacuum Welding of smallest components and thin wall thickness (membrane) Low heat input and therefore minimal distortion High welding speed with best cost efficiency Welding of metals with different melting points Vacuum welding for critical materials like titanium, etc. Single parts up to approx. 1000m length and part weight up to approx. 10kg Development of electronic circuits Development / schematic design of electronics in the field of measurement technology PCB layout / board design / circuit board unbundling and optimization Construction of functional samples / prototype construction / initial sample series Graphical user interfaces for PC or embedded systems Driver development for Linux, Windows and Mac Firmware development for microcontrollers Production of electronic boards Printed circuit boards Production of electronic boards according to customer specifications / blueprint Small to medium series production in the quantity range of 10-1000 pieces Testing / optimization of circuits and implementation of adjustments SMD basic assembly and conventional soldering of components for customization
1 / 4
2 / 4
3 / 4
4 / 4
Seeheim-Jugenheim, Germany
Member since 2022
Employees10 - 20
Certificates1
Turnover1 - 5 Mil.
Year of foundation1973
Competencies
Technologies
Sheet Metal Processing
| Technologies | Lotsize | Length | Width | Material thickness |
|---|---|---|---|---|
Laser cutting 2D | 0–1,000 | from 0 mm | 0–1,500 mm | 0–15 mm |
Jigmaking
| Technologies | Length | Width | Height | Weight |
|---|---|---|---|---|
Drilling / milling jigs | 1–500 mm | 1–500 mm | 1–200 mm | 1–20 kg |
Measuring / testing jigs | 1–500 mm | 1–500 mm | 1–500 mm | 1–20 kg |
Assembly jigs | 1–500 mm | 1–500 mm | 1–500 mm | 1–20 kg |
Welding jigs | 1–500 mm | 1–500 mm | 1–500 mm | 1–20 kg |
Turning
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Turning | 0–1,000 | 0–1,000 mm | — | — | 0–200 mm | — |
Automatic turning (bar) | from 50 | 0–800 mm | — | — | 10–100 mm | — |
Swiss turning | 0–10,000 | from 0 mm | — | — | from 0 mm | — |
Full-range turning (including milling) | 0–1,000 | 0–1,000 mm | — | — | 0–200 mm | — |
Deep-hole drilling | 1–10,000 | 1–200 mm | 1–200 mm | 1–200 mm | 1–200 mm | 0.1–10 kg |
Centering / end facing | 1–10,000 | 10–1,000 mm | — | — | 1–200 mm | — |
Shaft machining | 1–10,000 | 1–1,000 mm | — | — | 1–200 mm | 0.1–10 kg |
Welding
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Inert gas shielded arc welding (MIG/MAG) | from 0 | 0–1,000 mm | 0–1,000 mm | 0–1,000 mm | — | 0–25 kg |
Inert gas shielded arc welding (TIG) | from 0 | 0–1,000 mm | 0–1,000 mm | 0–1,000 mm | — | 0–25 kg |
Laser-beam welding | 1–10,000 | 0.1–1,000 mm | 0.1–1,000 mm | 0.1–500 mm | 0.1–200 mm | 0.1–10 kg |
Electron-beam welding | 1–10,000 | 1–500 mm | 1–500 mm | 1–500 mm | — | 0.1–10 kg |
Flash-butt welding | 1–10,000 | — | — | — | — | — |
Milling
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Milling | 0–1,000 | 0–500 mm | 0–1,000 mm | 0–500 mm | — | — |
5-axis milling machines | 0–1,000 | 0–500 mm | 0–250 mm | 0–500 mm | — | — |
Full-range milling (including turning) | 1–10,000 | 1–500 mm | 1–500 mm | 1–500 mm | 1–200 mm | — |
Engraver milling | 1–1,000 | 1–1,000 mm | 1–1,000 mm | 1–200 mm | 1–200 mm | 0.1–20 kg |
Machining (Plastics & Rubber)
| Technologies | Lotsize | Length | Width | Height |
|---|---|---|---|---|
Form milling (3 D) | 0–1,000 | 0–500 mm | 0–250 mm | 0–100 mm |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Sawing | 1–10,000 | 1–6,000 mm | 1–200 mm | 1–200 mm | 1–200 mm | — |
Drilling / threading / tapping | 1–10,000 | 1–100 mm | 1–100 mm | 1–100 mm | — | 0.1–10 kg |
Materials
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloysSolder
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel
Cast metals
Cast steelCast iron
Certificates
ISO 9001:2015
Contact
Location
Main locationFriedrich-Ebert-Str. 37, 64342 Seeheim-Jugenheim, Germany
Company contact
Contact persons
MN
Matthias Niegel
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.