NIROSTYLE GmbH
Germany, 19288 Ludwigslust
Overview
About NIROSTYLE GmbH
Who we are
Lasers A laser penetrates contact sheets, tubes and profiles. At the point where the focused beam impinges upon the workpiece, the metal begins to melt away. This results in a narrower kerf, barely wider than the beam itself We use the laser beam fusion cutting as a separation method for stainless steel, aluminum, brass, bronze and titanium. The combination of our 4000-watt laser system from Trumpf with the Fladder-deburring providing its customers a number of special advantages: We can produce almost any shape. The material heats up hardly and does not warp. The cutting edges are straight, free of burrs and clean. The components can be processed immediately. Bending Bent parts can be found in technical applications in ever-increasing numbers. They enable materials, weight and cost savings. However, precisely bent sheet metal parts require extensive knowledge of materials, precise work preparation and true machine powerhouses. We work with a Trumpf press brake with 6-axis stop, automatic angle measurement system and 230 tons of pressure. In our work, preparing the optimum bend sequence is determined to create its processing using 3-D software. In addition to the geometry of the bending portion, the empirically determined characteristics of the material are considered. This can be programmed and produced within a very short time even complicated bent parts. Welding Stainless materials are now available in great variety. Exact knowledge of their behavior during welding are therefore a fundamental prerequisite for the quality-oriented performing welding operations. And: Stainless materials do not come around a corresponding weld-treatment if they are to remain rust-free. As specialists in stainless materials, we offer our clients professional solutions around the welding and finishing of steel and aluminum. We perform the welding process TIG, MAG and MIG and spot welding and stud welding. As a post-treatment process, we have preferably pickling and passivation, but also sanding or bead blasting. Edit Machine parts, panels, framing, or container - in addition to welded joints play mechanical joining techniques an essential role in the structural design of composite systems. The additional mechanical processing of sheet metal, pipes and profiles fits into our production flow seamlessly. We manufacture holes, eyelets, threads and cuts and can offer our customers the manufacture of turned and milled parts made of rustproof materials as well as the riveting, bonding, welding or bolts injection of standard parts. Surface As specialists in stainless steel and aluminum we are very familiar with the decorative design of the product surfaces.We advise you gladly. Because the right surface treatment affects not only the appearance of the products. Also, the strength and the cleaning behavior are influenced by it. Depending on the application or customer preference, the method of glass bead blasting, grinding, polishing, electro polishing, chromating, anodizing and powder coating available. Labels can be designed as a laser marking, engraving or the screen printing method.
1 / 1
Ludwigslust, Germany
Member since 2001
Employees20 - 50
Certificates1
Turnover1 - 5 Mil.
Year of foundation1997
Competencies
Technologies
Welding
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Inert gas shielded arc welding (MIG/MAG) | 1–1,000 | 1–9,000 mm | 0–3,000 mm | 0–3,000 mm | 0–2,000 mm | 0–1,500 kg | 0.1–25 mm |
Inert gas shielded arc welding (TIG) | 1–10,000 | 0–9,000 mm | 0–3,000 mm | 0–3,000 mm | 0–2,500 mm | 0–1,500 kg | 0.1–30 mm |
Spot welding | 1–1,000 | from 0 mm | from 0 mm | from 0 mm | from 0 mm | from 0 kg | 0.3–4 mm |
Manual electrode welding | 1–10,000 | 0–9,000 mm | 0–3,000 mm | 0–3,000 mm | 0–2,000 mm | 0–1,500 kg | 0.1–25 mm |
Stud welding | 1–500 | from 0 mm | from 0 mm | from 0 mm | from 0 mm | from 0 kg | from 0 mm |
Sheet Metal Processing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Laser cutting 2D | 1–10,000 | 4–3,000 mm | 4–1,500 mm | from 0 mm | from 0 mm | 0–900 kg | 0.25–15 mm |
Laser cutting, tube & section | 1–10,000 | 15–3,000 mm | 15–150 mm | 15–200 mm | 15–414 mm | 0–200 kg | 1–8 mm |
Pipe & Tube Manufacturing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Flange bending, profile bending | 1–1,000 | from 0 mm | 10–100 mm | from 0 mm | from 0 mm | from 0 kg | 1.5–40 mm |
Finishing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Belt grinding | 1–5,000 | from 0 mm | 10–1,150 mm | from 0 mm | from 0 mm | from 0 kg | 0.3–200 mm |
Surface grinding machine | 1–500 | 10–2,500 mm | 10–1,500 mm | 1–1,200 mm | from 0 mm | 0–200 kg | from 0 mm |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Sawing | 1–1,000 | 10–6,000 mm | 2–310 mm | 2–250 mm | 2–260 mm | from 0 kg | from 0 mm |
Labelling / marking
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Laser marking / Laser inscription | 1–10,000 | 1–1,000 mm | 1–500 mm | 1–400 mm | 1.5–176 mm | from 0 kg | from 0 mm |
Laser depth engraving | 1–10,000 | 1–1,000 mm | 1–500 mm | 1–400 mm | 1.5–176 mm | from 0 kg | from 0 mm |
Materials
Advanced Materials
Nickel alloy (Inconel, Monel, Hastelloy)
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Precious metals
SilverGoldPlatinumOther precious metals
Plastics/synthetic materials
ThermoplasticsThermosetsElastomersSilocone (LSR)Natural and vulcanised rubber
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloys
Steel
Stainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Spring steel
Industries
Military engineeringMechanical engineeringChemical industryAutomotive and vehicle constructionPackaging industryMedical technologyPower generation and transmission industryMachine tool manufacturingBuilding, agricultural and forestry machinery manufacturingSpecial purpose machinery manufacturingClean room technologyBoiler, container and tank construction Hydraulic and pneumatic industryPlant engineering and constructionApparatus engineeringAerospace and aviation industryElectrical industryPaper and printing machinery industryFurniture industry
Certificates
ISO 9001:2008
Parts & Machines
Machinery (16)
1 / 16
PK 35
ManufacturerSahinler
Control-
Year of Construction2000
Technology
Flange bending, profile bending
2 / 16
Shark 320 SX
ManufacturerMEP
Control-
Year of Construction1998
Technology
Sawing
3 / 16
SF 8-2
ManufacturerDALEX
Control-
Year of Construction1999
Technology
Spot welding
4 / 16
TIG 230 AC/DC
ManufacturerEWM
Control-
Year of Construction1998
Technology
Manual electrode weldingInert gas shielded arc welding (TIG)
5 / 16
MIG 350 Puls
ManufacturerEWM
Control-
Year of Construction1998
Technology
Inert gas shielded arc welding (MIG/MAG)
6 / 16
V40 AC/DC
ManufacturerLorch
Control-
Year of Construction2008
Technology
Inert gas shielded arc welding (TIG)
7 / 16
WPS 50 PFR
ManufacturerRODCRAFT
Control-
Year of Construction2008
8 / 16
ZBS
ManufacturerKuhlmeyer
Control-
Year of Construction2007
Technology
Surface grinding machine
9 / 16
AUT
ManufacturerFladder
Control-
Year of Construction2007
Technology
Belt grinding
10 / 16
SMG45 K-P
ManufacturerMHG
Control-
Year of Construction2000
11 / 16
BMS-8NV
ManufacturerSoyer
Control-
Year of Construction2005
Technology
Stud welding
12 / 16
SK-1K T Nut
ManufacturerSoyer
Control-
Year of Construction2008
Technology
Stud welding
13 / 16
V40 AC/DC
ManufacturerLorch
Control-
Year of Construction2004
Technology
Inert gas shielded arc welding (TIG)
14 / 16
Powerflex II
ManufacturerFröhlich & Dörken
Control-
Year of Construction2006
15 / 16
Powerflex II
ManufacturerFröhlich & Dörken
Control-
Year of Construction2000
16 / 16
TruMark 7000
ManufacturerTRUMPF
Control-
Year of Construction2008
Technology
Laser depth engravingLaser marking / Laser inscription
16 Machinery
Flange bending, profile bending1
Sawing1
Spot welding1
Manual electrode welding1
Inert gas shielded arc welding (TIG)3
Inert gas shielded arc welding (MIG/MAG)1
Surface grinding machine1
Belt grinding1
Stud welding2
Laser depth engraving1
Laser marking / Laser inscription1
Contact
Location
Main locationBauernallee 15, 19288 Ludwigslust, Germany
Further locationsLudwigslust
Company contact
Contact persons
DF
Dr. Thomas Feldmann
HL
Heiko Lüdeke
WZ
Wolfgang Joh. Zwibel
FK
Fred Krüger
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.