Qpart LTD

Ukraine, 49025 Dnipro

Overview

About Qpart LTD

Who we are

Dear Sirs, We offer outsourcing services, manufacturing parts according to your drawings (turning, milling and welding works and etc) Our company Qpart is located in Dnipro, Ukraine, at the production facilities of the Dnipropetrovsk Rolling Roll Plant. Our company has more than 300 modern CNC turning and milling machines and other metalworking and foundry equipment. The company's technological equipment allows for large-scale production of parts for agricultural, automotive, construction, and railway equipment according to customer drawings. We produce parts: couplings, flanges, shafts, bushings, cylinders, rollers, axle boxes, washers, housings, compression fittings (DIN 2353) and etc. and many others The maximum diameter of the part is 4000 mm, the maximum length is 8000 mm The shot company presentation is attachment. We can process any of your parts according to your drawings! We invite you to cooperate! Best regards, Sales Department Oleh Horodnichiy

1 / 1

Dnipro, Ukraine

Member since 2025

Employees50 - 100

Certificates1

Turnover1 - 5 Mil.

Marketing documents

Schmotzer.pdfPDF File Q_part_CNC.pdfPDF File CNC_service.pdfPDF File

Competencies

Technologies

Heat Treatment

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Case hardening/surface hardening	1–1,000	5–8,000 mm	5–3,000 mm	5–1,500 mm	5–3,500 mm	0–12,000 kg
Hardening	1–1,000	5–8,000 mm	5–6,000 mm	5–6,000 mm	5–2,000 mm	0–12,000 kg

Turning

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Swiss turning	1–500 k	from 0 mm	—	—	from 0 mm	—
Full-range turning (including milling)	1–1,000	5–8,000 mm	—	—	5–4,000 mm	—
Hard turning	1–500	5–8,000 mm	—	—	5–4,000 mm	—
Broaching	1–500	5–8,000 mm	—	—	5–3,000 mm	—
Deep-hole drilling	1–1,000	5–8,000 mm	5–4,000 mm	5–4,000 mm	5–3,000 mm	0–12,000 kg
Centering / end facing	1–1,000	5–8,000 mm	—	—	5–3,500 mm	—
Shaft machining	1–1,000	5–8,000 mm	—	—	5–3,500 mm	0–12,000 kg

Surface Treatment

Technologies	Lotsize	Length	Width	Height	Weight
Blacking	1–1,000	5–8,000 mm	5–3,000 mm	5–1,500 mm	0–12,000 kg

Milling

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Milling	1–500 k	from 0 mm	from 0 mm	from 0 mm	—	—
5-axis milling machines	1–500 k	from 0 mm	from 0 mm	from 0 mm	—	—
Form milling (3 D)	1–1,000	0–3,000 mm	0–1,000 mm	0–500 mm	—	—
Full-range milling (including turning)	1–1,000	5–8,000 mm	5–4,000 mm	5–2,000 mm	2–3,500 mm	—
HSC milling	1–1,000	5–8,000 mm	5–2,000 mm	5–1,000 mm	—	0–12,000 kg
Deep-hole drilling	1–1,000	5–8,000 mm	5–2,000 mm	5–2,000 mm	5–3,500 mm	0–12,000 kg
Ultrasonic milling	1–1,000	5–8,000 mm	5–3,000 mm	5–1,500 mm	—	0–12,000 kg
Engraver milling	1–1,000	5–8,000 mm	5–3,000 mm	5–1,500 mm	5–3,500 mm	0–12,000 kg

Drilling / Sawing

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Deep-hole drilling	1–1,000	5–8,000 mm	5–3,000 mm	5–1,500 mm	5–3,500 mm	0–12,000 kg
Ultrasonic drilling	1–1,000	5–8,000 mm	5–3,000 mm	5–1,500 mm	—	0–12,000 kg
Sawing	1–1,000	5–8,000 mm	5–3,000 mm	5–1,500 mm	5–3,500 mm	—
Drilling / threading / tapping	1–1,000	5–8,000 mm	5–2,000 mm	5–1,500 mm	—	0–12,000 kg

Materials

Heavy metals

Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloysSolder

Cast metals

Cast steelCast iron

Steel

Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel

Plastics/synthetic materials

ThermoplasticsAcrylic (PMMA)High performance plasticThermosetsElastomersSilocone (LSR)Natural and vulcanised rubberGlass fibre-reinforced plasticCarbon fibre-reinforced plasticParticle reinforced composite materialsWood-Plastic-Composites (WPC)Natural Fibre Composites (NFC)

Light metals

Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys