Ruhrzerspanung GmbH & Co. KG

Germany, 45966 Gladbeck

Competencies

Technologies

Turning

Technologies	Lotsize	Length	Diameter	Weight
Turning	1–5 M	1–4,000 mm	1–900 mm	—
Automatic turning (bar)	1–5 M	1–4,000 mm	1–900 mm	—
Swiss turning	1–5 M	1–4,000 mm	1–900 mm	—
Full-range turning (including milling)	1–5 M	1–4,000 mm	1–900 mm	—
Hard turning	1–5 M	1–4,000 mm	1–900 mm	—
Centering / end facing	1–5 M	1–4,000 mm	1–900 mm	—
Shaft machining	1–5 M	1–4,000 mm	1–900 mm	0–3,500 kg

Heat Treatment

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Carbonitriding	1–5 M	1–5,000 mm	1–1,000 mm	1–1,300 mm	1–850 mm	0–3,500 kg
Case hardening/surface hardening	1–5 M	1–5,000 mm	1–1,000 mm	1–1,300 mm	1–850 mm	0–3,500 kg
Annealing	1–5 M	1–5,000 mm	1–1,000 mm	1–1,300 mm	1–850 mm	0–3,500 kg
Hardening	1–5 M	1–5,000 mm	1–1,000 mm	1–1,300 mm	1–850 mm	0–3,500 kg
Induction hardening	1–5 M	1–5,000 mm	1–1,000 mm	1–1,300 mm	1–850 mm	0–3,500 kg
Nitriding processes	1–5 M	1–5,000 mm	1–1,000 mm	1–1,300 mm	1–850 mm	0–3,500 kg
Oxidizing	1–5 M	1–5,000 mm	1–1,000 mm	1–1,300 mm	1–850 mm	0–3,500 kg
Vacuum annealing	1–5 M	1–5,000 mm	1–1,000 mm	1–1,300 mm	1–850 mm	0–3,500 kg
Hardening and tempering	1–5 M	1–5,000 mm	1–1,000 mm	1–1,300 mm	1–850 mm	0–3,500 kg

Finishing

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
External cylindrical grinding	1–5 M	1–1,000 mm	—	—	1–340 mm	—
Internal cylindrical grinding	1–50 M	1–1,000 mm	—	—	1–340 mm	—
Circular honing - internal	1–50 M	1–460 mm	1–460 mm	1–460 mm	1–220 mm	0–1,000 kg

Machining (Extruded Profiles)

Technologies	Width	Height	Weight
Machining of extruded sections	1–1,300 mm	1–1,300 mm	0–5,000 kg

Milling

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Milling	1–5 M	1–5,000 mm	1–1,300 mm	1–1,300 mm	—	—
5-axis milling machines	1–5 M	1–5,000 mm	1–1,300 mm	1–1,300 mm	—	—
Full-range milling (including turning)	1–5 M	1–4,000 mm	1–1,300 mm	1–1,300 mm	0–900 mm	—
Deep-hole drilling	1–5 M	1–5,000 mm	1–1,300 mm	1–1,300 mm	1–850 mm	0–5,000 kg

Drilling / Sawing

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Sawing	1–10 M	1–7,000 mm	1–500 mm	1–440 mm	1–440 mm	—
Drilling / threading / tapping	1–50 M	1–5,000 mm	1–1,300 mm	1–1,300 mm	—	0–5,000 kg

Surface Treatment

Technologies	Lotsize	Length	Width	Height	Diameter	Weight
Plasma coating	1–5 M	1–5,000 mm	1–1,300 mm	1–1,300 mm	1–900 mm	0–5,000 kg
Sand blasting	1–5 M	1–5,000 mm	1–1,300 mm	1–1,300 mm	—	0–5,000 kg

Materials

Cast metals

Cast steelCast iron

Light metals

Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys

Heavy metals

Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloysSolder

Steel

Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel

Advanced Materials

Nickel alloy (Inconel, Monel, Hastelloy)

Industries

Machine tool manufacturingPackaging industryTelecommunication industryShipbuilding industryClean room technologyPaper and printing machinery industryHousehold appliance industryInformation technology (hardware)Medical technologyMechanical engineeringPlant engineering and constructionSpecial purpose machinery manufacturingMilitary engineeringPower generation and transmission industryApparatus engineeringMeasurement and control technique, laboratory equipmentFurniture industryBoiler, container and tank construction Electrical industryDrive and gear engineeringAutomotive and vehicle constructionAutomation and control engineeringFittings engineeringAerospace and aviation industryHydraulic and pneumatic industryRailway and rail vehicles industryConstruction and architectural suppliesLighting industryBuilding, agricultural and forestry machinery manufacturingMining and tunnel engineeringOffice machinery and suppliesChemical industryAir conditioning, refrigeration and ventilation industryPrecision engineering, mechatronics and optics

+26 moreShow less