R.W. Grass GmbH
Italy, 39040 Vahrn
Overview
About R.W. Grass GmbH
Who we are
The company RWGrass GmbH is in the range of CNC precision turned and milled parts and finishing of cast and sintered parts at home. Our products are manufactured in various materials and various sizes from small to large series. Our flexibility refers not only to batch sizes from 500 to 100,000 pieces - the adaptation to customer requirements using CAD are appreciated by our partners. The manufacture and assembly of precision mechanical devices and modules is our specialty. Presses, punching, squeezing, riveting, drilling, threading, screw, solder, tin, merge, shapes, spot welding, grinding, milling, turning, adjust, measure and test the purchase of integrated operations. The house tool makes us independent and allows for maximum on-time delivery. So workflows are optimized and customer requirements into account even better. Products: We manufacture turned parts: - Diameter from 8mm to 650mm - Length up to 200mm Milled parts: - Length up to max.800mm Materials: Stainless steel (eg 1.4301, 1.4404,), steel, brass, copper, aluminum, plastics Delivery program: Pump body housing, valve body, piston, adapters, bearing chock, collets, bushings, grips, power tap, shielding, solder lugs, optics carrier photodiode holder, spacer sleeve, stop in connector, female, fiber filters, sleeve, guide pin twist mechanism, driver twist mechanism, thumbwheel mechanics, different door- window buttons, different door window handles, press rings with slope, reference upper part, orientation completely, burner housing, hollow shafts, bolts, lever cylinder housing, shaft for drive motor, cap for drive motor, ball valve, sleeve, guide shaft, stop bar, assembly photographic technique, component assembly Motor snowmaking equipment , component assembly for medical and measuring equipment of human blood analysis;
1 / 7
2 / 7
3 / 7
4 / 7
5 / 7
6 / 7
7 / 7
Vahrn, Italy
Member since 2007
Employees10 - 20
Certificates1
Turnover1 - 5 Mil.
Marketing documents
Competencies
Technologies
Assembly
| Technologies | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|
Mechanical assembly | from 0 mm | from 0 mm | from 0 mm | from 0 mm | 0–200 kg | from 0 mm |
Electromechanical assembly | — | — | — | — | 0–200 kg | — |
Turning
| Technologies | Lotsize | Length | Diameter |
|---|---|---|---|
Turning | 1,000–1 M | 2–150 mm | 10–80 mm |
Automatic turning (bar) | 1,000–1 M | 2–150 mm | 4–80 mm |
Full-range turning (including milling) | 1,000–1 M | 2–150 mm | 10–80 mm |
Hard turning | 1,000–1 M | 2–150 mm | 10–80 mm |
Assembly Group Manufacturing
| Technologies | Lotsize | Length | Width | Material thickness |
|---|---|---|---|---|
Clinching | 20–1 M | 1–1,000 mm | 1–1,000 mm | 1–100 mm |
Riveting | 20–1 M | 1–1,000 mm | 1–1,000 mm | 1–100 mm |
Measuring & Testing
| Technologies | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|
Measuring / testing | 1–1,000 mm | 1–1,000 mm | 1–100 mm | 1–200 mm | 0–50 kg |
Milling
| Technologies | Lotsize | Length | Width | Height | Weight |
|---|---|---|---|---|---|
Milling | 20–1 M | 1–760 mm | 1–460 mm | 1–250 mm | 0–40 kg |
HSC milling | 20–1 M | 1–760 mm | 1–460 mm | 1–250 mm | 0–40 kg |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Drilling / threading / tapping | 10–1 M | 1–760 mm | 1–460 mm | 1–250 mm | from 0 mm | 0–40 kg | from 0 mm |
Labelling / marking
| Technologies | Lotsize | Length | Width |
|---|---|---|---|
Pad printing | 1–1 M | 1–1,000 mm | 1–1,000 mm |
Materials
Cast metals
Cast steelCast iron
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Plastics/synthetic materials
ThermoplasticsHigh performance plasticThermosetsElastomers
Industries
Precision engineering, mechatronics and opticsBuilding, agricultural and forestry machinery manufacturingHousehold appliance industryPower generation and transmission industryElectrical industryChemical industryLighting industryConstruction and architectural suppliesOffice machinery and suppliesApparatus engineeringFittings engineeringAir conditioning, refrigeration and ventilation industryBoiler, container and tank construction Special purpose machinery manufacturingDrive and gear engineeringPackaging industryAerospace and aviation industryAutomation and control engineeringMedical technologyRailway and rail vehicles industryPaper and printing machinery industryHydraulic and pneumatic industryAutomotive and vehicle constructionPlant engineering and constructionMachine tool manufacturingMechanical engineeringShipbuilding industryMeasurement and control technique, laboratory equipment
Certificates
ISO 9001:2008
Parts & Machines
Parts (1)
1 / 1
verschiedene Dreh- und Frästeile
Lotsize0
Descriptionnull
Machinery (10)
1 / 10
LB 3000 EXMYW
ManufacturerOkuma
ControlOkuma
Year of Construction2012
Technology
Full-range turning (including milling)Automatic turning (bar)Turning
2 / 10
LB300MYW
ManufacturerOkuma
ControlOkuma
Year of Construction2010
Technology
Automatic turning (bar)Turning
3 / 10
LT 200M
ManufacturerOkuma
ControlOkuma
Year of Construction2007
Technology
Automatic turning (bar)Turning
4 / 10
MF46 VA
ManufacturerOkuma
ControlOkuma
Year of Construction2006
Technology
Drilling / threading / tappingHSC millingMilling
5 / 10
LB300MW
ManufacturerOkuma
ControlOkuma
Year of Construction2004
Technology
TurningAutomatic turning (bar)
6 / 10
Okuma LCS15
ManufacturerOkuma
ControlOkuma
Year of Construction1998
Technology
TurningAutomatic turning (bar)
7 / 10
LB10
ManufacturerOkuma
ControlOkuma
Year of Construction1996
Technology
Automatic turning (bar)Turning
8 / 10
TVC 200 P
ManufacturerTraub
ControlIso
Year of Construction1996
Technology
MillingDrilling / threading / tapping
9 / 10
CSK 300
ManufacturerHeckert
ControlISO
Year of Construction1998
Technology
MillingDrilling / threading / tapping
10 / 10
c
ManufacturerHermle
Control-
Year of Construction1985
Technology
Drilling / threading / tappingMilling
1 Parts
10 Machinery
Full-range turning (including milling)1
Automatic turning (bar)6
Turning6
Drilling / threading / tapping4
HSC milling1
Milling4
Contact
Location
Main locationHandwerkerzone 44, 39040 Vahrn, Italy
Further locations39040 Vahrn
Staat: Italien
Region: Trentino-Südtirol
Provinz: Bozen (Südtirol)
Bezirksgemeinschaft: Eisacktal
Staat: Italien
Region: Trentino-Südtirol
Provinz: Bozen (Südtirol)
Bezirksgemeinschaft: Eisacktal
Company contact
Contact persons
JG
Jan Jorma Grass
TG
Timo Grass
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.