Schaller Technik GmbH
Germany, 97877 Wertheim
Overview
About Schaller Technik GmbH
Who we are
The full range of sheet metal and metal processing - all from a single source. Founded in 1975 as a company for the production of fat supply systems and container systems Schaller GmbH offers, since 1995, the full range of sheet metal and metal processing from a single source. We are a complete solutions provider with services ranging from design to installation, advice and support. In the area of planning and construction, we are ideally positioned by a team that consists of experienced technicians and engineers. Flexibility and rapid response times are essential in today's time. A large warehouse with a variety of sheet metal and other raw materials enables short delivery times. Even small amounts can be made within no time. Service is very important for us. Therefore, we not only supply reliable, we can also assist you with your installation. We also offer the possibility of a just-in-time delivery for blanket orders.
1 / 6
2 / 6
3 / 6
4 / 6
5 / 6
6 / 6
Wertheim, Germany
Member since 2004
Employees50 - 100
Certificates1
Turnover5 - 10 Mil.
Year of foundation1975
Marketing documents
Competencies
Technologies
Turning
| Technologies | Lotsize | Length | Diameter |
|---|---|---|---|
Turning | 0–500 | 0–584 mm | 0–40 mm |
Welding
| Technologies | Lotsize | Length | Width | Height | Weight | Material thickness |
|---|---|---|---|---|---|---|
Inert gas shielded arc welding (MIG/MAG) | 1–1,000 | 5–6,000 mm | 5–2,000 mm | 5–2,000 mm | 0–5,000 kg | — |
Inert gas shielded arc welding (TIG) | 1–10,000 | 5–6,000 mm | 5–2,000 mm | 5–2,000 mm | 0–5,000 kg | — |
Spot welding | 1–1,000 | — | — | — | — | 0.1–3 mm |
Assembly
| Technologies | Weight |
|---|---|
Mechanical assembly | 0–1,000 kg |
Industrial / On-site-assembly | 0–10,000 kg |
Sheet Metal Processing
| Technologies | Lotsize | Length | Width | Material thickness |
|---|---|---|---|---|
Laser cutting 2D | 1–100 k | 10–1,500 mm | 10–3,000 mm | 0.5–25 mm |
Bending / folding | 1–100 k | 5–3,000 mm | — | 0.5–8 mm |
Punching / nibbling | 1–100 k | 5–1,500 mm | 5–3,000 mm | 0.5–5 mm |
Combined forming laser cutting / punching | 1–50,000 | 10–1,500 mm | 10–3,000 mm | 0.5–8 mm |
Plate rolling / bending | 1–10,000 | — | 5–2,000 mm | 0.5–5 mm |
Welded constructions / Structural Steelwork
| Technologies | Length | Width | Height | Weight |
|---|---|---|---|---|
Welded constructions (weldments) | 1–5,000 mm | 1–5,000 mm | 1–5,000 mm | 0–10,000 kg |
Milling
| Technologies | Lotsize | Length | Width | Height |
|---|---|---|---|---|
Milling | 0–500 | 0–635 mm | 0–1,270 mm | 0–508 mm |
Materials
Heavy metals
Copper-zinc alloys (brass)
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steel
Light metals
Aluminium and aluminium alloys
Plastics/synthetic materials
Thermoplastics
Cast metals
Cast steelCast iron
Industries
Building, agricultural and forestry machinery manufacturingElectrical industryAutomotive and vehicle constructionChemical industryInformation technology (hardware)Military engineeringClean room technologySpecial purpose machinery manufacturingHousehold appliance industryPower generation and transmission industryMining and tunnel engineeringLighting industryAir conditioning, refrigeration and ventilation industryOffice machinery and suppliesBoiler, container and tank construction Mechanical engineeringDrive and gear engineeringMedical technologyPlant engineering and constructionTelecommunication industryPackaging industryApparatus engineeringFittings engineeringAutomation and control engineeringMachine tool manufacturingPaper and printing machinery industryFurniture industryMeasurement and control technique, laboratory equipmentPrecision engineering, mechatronics and opticsConstruction and architectural suppliesRailway and rail vehicles industryAerospace and aviation industryHydraulic and pneumatic industryShipbuilding industry
Certificates
ISO 9001:2015
Parts & Machines
Machinery (7)
1 / 7
TruLaser 5030 fiber
ManufacturerTrumpf
Year of Construction2016
2 / 7
TruLaser 5030
ManufacturerTrumpf
Year of Construction2007
3 / 7
Trumatic 7000
ManufacturerTrumpf
Year of Construction2011
4 / 7
TruBend 5170
ManufacturerTrumpf
Year of Construction2011
5 / 7
TrumaBend V130
ManufacturerTrumpf
Year of Construction1997
6 / 7
TrumaBend V50
ManufacturerTrumpf
Year of Construction2006
7 / 7
TruBend 5085
ManufacturerTrumpf
Year of Construction2017
7 Machinery
Contact
Location
Main locationBreiter Weg 20, 97877 Wertheim, Germany
Further locationsWeiterer Lager- und Montagestandort (ca. 2.600 m²) in Wertheim-Bestenheid
Company contact
Contact persons
PG
Philipp Goldschmitt
CB
Christoph Berberich
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.