Siegel Gummi- und Kunststofffabrik GmbH
Germany, 63571 Gelnhausen
Overview
About Siegel Gummi- und Kunststofffabrik GmbH
Who we are
We are a more than 60 years old company, specialised in stamped rubber production.
We start with a thickness of 0,3 mm material using all special types of sheets even in Silicon and Viton. Tools are made by ourself.
We also produce seals slotted and grooved- rings with desired tolerances in the same qualitys.
An absolutely adapted team manufactures and controls permanently all products.
Through automation we were able to improve our capacy by rising up our quality level. For this we got a cost-structure which fulfils the market demands.
1 / 1
Gelnhausen, Germany
Member since 2004
Employees10 - 20
Year of foundation1946
Competencies
Technologies
Sheet Metal Forming (Stamping, Deep-drawing)
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Punching / pressing (Out-of-tool) | 100–1 M | 15–60,000 mm | 15–1,400 mm | from 0 mm | from 0 mm | from 0 kg | from 0 mm |
Solid Forming
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Impact extrusion | 500–1 M | 0.2–500 mm | from 0 mm | from 0 mm | 2–1,000 mm | from 0 kg | from 0 mm |
Materials
Plastics/synthetic materials
Elastomers
Industries
Military engineeringPlant engineering and constructionShipbuilding industryPrecision engineering, mechatronics and opticsMining and tunnel engineeringConstruction and architectural suppliesApparatus engineeringOffice machinery and suppliesMedical technologyClean room technologyPackaging industryBoiler, container and tank construction Telecommunication industryHousehold appliance industryHydraulic and pneumatic industryAerospace and aviation industryMeasurement and control technique, laboratory equipmentPaper and printing machinery industryAir conditioning, refrigeration and ventilation industryAutomotive and vehicle constructionDrive and gear engineeringFittings engineeringChemical industryRailway and rail vehicles industryFurniture industrySpecial purpose machinery manufacturingMechanical engineeringMachine tool manufacturingInformation technology (hardware)Power generation and transmission industryLighting industryBuilding, agricultural and forestry machinery manufacturingAutomation and control engineeringElectrical industry
Parts & Machines
Machinery (2)
1 / 2
Stanzautomat diverse
ManufacturerMABU, Schön & Sandt, Weingarten
Control-
Technology
Punching / pressing (Out-of-tool)
2 / 2
diverse Modelle
ManufacturerREP, Troester, DESMA
Control-
Technology
Impact extrusion
2 Machinery
Punching / pressing (Out-of-tool)1
Impact extrusion1
Contact
Location
Main locationAltenhaßlauer Str 15-17, 63571 Gelnhausen, Germany
Further locationsGelnhausen
Company contact
Contact persons
OS
Oliver Schwing
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.