Sobek CNC Dreh- und Frästechnik GmbH
Germany, 76689 Karlsdorf-Neuthard
Overview
About Sobek CNC Dreh- und Frästechnik GmbH
Who we are
SOBEK CNC manufactures ready-to-install turning, milling and drilling parts as individual parts or in small and large series from all machinable materials with or without surface treatment. With our modern and powerful machine park, we are optimally equipped for the production of sophisticated turned and milled parts. We are happy to support you in the product development stage and thus enable the cost optimization of your components right from the start. Processing methods outside of our production range, e.g. B. grinding, laser marking, heat treatment, gear cutting, polishing, electropolishing, anodizing, nickel plating, galvanizing, chromating and passivating are carried out by long-standing and trustworthy cooperation partners - we take care of the timely organization.
1 / 1
Karlsdorf-Neuthard, Germany
Member since 2020
Employees5 - 10
Certificates1
Turnover1 - 5 Mil.
Year of foundation1985
Competencies
Technologies
Turning
| Technologies | Lotsize | Length | Diameter | Weight |
|---|---|---|---|---|
Turning | 1–500 | 4–500 mm | 5–260 mm | — |
Automatic turning (bar) | 1–2,000 | 5–70 mm | 5–60 mm | — |
Swiss turning | 1–500 | 5–300 mm | 5–150 mm | — |
Full-range turning (including milling) | 1–500 | 5–500 mm | 5–260 mm | — |
Hard turning | 1–5,000 | 5–200 mm | 5–150 mm | — |
Broaching | — | — | — | — |
Deep-hole drilling | — | — | — | — |
Centering / end facing | 1–5,000 | 5–300 mm | 5–250 mm | — |
Shaft machining | 1–500 | 5–300 mm | 5–150 mm | 0–30 kg |
Cable Preparation
| Technologies | Diameter |
|---|---|
Cable preparation | 3–20 mm |
Tubes and pipes (assembled)
| Technologies | Diameter |
|---|---|
Hydraulic tubes | 3–20 mm |
Industrial tubes | 3–20 mm |
Threading
| Technologies | Lotsize | Length | Diameter | Weight |
|---|---|---|---|---|
Worm milling | 1–200 | 5–300 mm | 5–150 mm | 0–30 kg |
Milling
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Milling | 1–500 | 5–600 mm | 5–500 mm | 5–100 mm | — | — |
5-axis milling machines | — | — | — | — | — | — |
Form milling (3 D) | 1–500 | 5–800 mm | 5–500 mm | 5–200 mm | — | — |
Full-range milling (including turning) | 1–5,000 | 5–800 mm | 5–500 mm | 5–200 mm | 5–250 mm | — |
HSC milling | 1–5,000 | 5–800 mm | 5–400 mm | 5–200 mm | — | 0–150 kg |
Ultrasonic milling | — | — | — | — | — | — |
Engraver milling | 1–5,000 | 5–800 mm | 5–200 mm | 5–200 mm | 5–250 mm | 0–150 kg |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Weight |
|---|---|---|---|---|---|
Drilling / threading / tapping | 1–5,000 | 5–800 mm | 5–400 mm | 5–200 mm | 0–150 kg |
Labelling / marking
| Technologies | Lotsize | Length | Width | Height | Diameter |
|---|---|---|---|---|---|
Laser marking / Laser inscription | 1–2,000 | 5–100 mm | 5–100 mm | 5–100 mm | 5–100 mm |
Materials
Advanced Materials
Nickel alloy (Inconel, Monel, Hastelloy)
Plastics/synthetic materials
ThermoplasticsHigh performance plasticThermosetsElastomersGlass fibre-reinforced plasticCarbon fibre-reinforced plastic
Light metals
Aluminium and aluminium alloys
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steel
Cast metals
Cast steelCast iron
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloys
Industries
Drive and gear engineeringPackaging industryMechanical engineeringHydraulic and pneumatic industryAutomotive and vehicle constructionMeasurement and control technique, laboratory equipmentApparatus engineeringPlant engineering and constructionSpecial purpose machinery manufacturing
Certificates
ISO 9001:2015
Parts & Machines
Machinery (3)
1 / 3
DMG alpha 310
ManufacturerDMG
ControlSiemens
Year of Construction2012
Technology
TurningFull-range turning (including milling)Shaft machiningAutomatic turning (bar)Centering / end facing
2 / 3
CTX 410
ManufacturerDMG
ControlFanuc
Year of Construction2006
Technology
Shaft machiningCentering / end facingTurningFull-range turning (including milling)Automatic turning (bar)
3 / 3
VC750XL
ManufacturerSpinner
ControlSiemens 840D
Year of Construction2018
Technology
HSC millingEngraver millingMillingForm milling (3 D)Worm millingDrilling / threading / tapping
3 Machinery
Turning2
Full-range turning (including milling)2
Shaft machining2
Automatic turning (bar)2
Centering / end facing2
HSC milling1
Engraver milling1
Milling1
Form milling (3 D)1
Worm milling1
Drilling / threading / tapping1
Contact
Location
Main locationIm Ochsenstall 24, 76689 Karlsdorf-Neuthard, Germany
Company contact
Contact persons
AR
Andreas Roth
TH
Thorsten Helfenbein
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.