Tengler & Co. Präzisionstechnik GmbH
Germany, 58840 Plettenberg
Overview
About Tengler & Co. Präzisionstechnik GmbH
Who we are
Tengler & Co. Präzisionstechnik GmbH is your partner for precision turned and milled parts. - Precision is not a godsend! - On an area of 2,500 m², we use the most modern machines to manufacture precision turned and milled parts with a diameter of 3 - 450 mm and lengths of up to 800 mm. According to your specifications, we deliver ready-to-install, including all rework, spaces, as well as surfaces and heat treatments. Our customers are spread across a wide variety of industries, e. B. - Automotive - Mechanical engineering - Wind turbine construction - Electrical engineering - Fastening technology - Hydraulic component construction uva.
1 / 9
2 / 9
3 / 9
4 / 9
5 / 9
6 / 9
7 / 9
8 / 9
9 / 9
Plettenberg, Germany
Member since 2021
Employees10 - 20
Certificates2
Turnover5 - 10 Mil.
Year of foundation1978
Competencies
Technologies
Turning
| Technologies | Lotsize | Length | Diameter |
|---|---|---|---|
Turning | 1–50 M | 1–800 mm | 1–450 mm |
Automatic turning (bar) | from 1 | 1–800 mm | 1–450 mm |
Swiss turning | 1–50 M | 1–800 mm | 1–450 mm |
Full-range turning (including milling) | 1–50 M | 1–800 mm | 1–450 mm |
Centering / end facing | 1–50 M | 1–800 mm | 1–450 mm |
Milling
| Technologies | Lotsize | Length | Width | Height | Diameter |
|---|---|---|---|---|---|
Full-range milling (including turning) | 1–5 M | 1–800 mm | 1–450 mm | 1–450 mm | 1–450 mm |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Weight |
|---|---|---|---|---|---|
Drilling / threading / tapping | 1–50 M | 1–800 mm | 1–450 mm | 1–450 mm | 0–15 kg |
Materials
Precious metals
Silver
Cast metals
Cast steelCast iron
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloys
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steel
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Industries
Air conditioning, refrigeration and ventilation industryApparatus engineeringHousehold appliance industryAerospace and aviation industryMeasurement and control technique, laboratory equipmentPaper and printing machinery industryClean room technologyMilitary engineeringBoiler, container and tank construction Chemical industryPlant engineering and constructionBuilding, agricultural and forestry machinery manufacturingMining and tunnel engineeringMachine tool manufacturingPrecision engineering, mechatronics and opticsPower generation and transmission industryAutomation and control engineeringMechanical engineeringConstruction and architectural suppliesElectrical industryLighting industryInformation technology (hardware)Furniture industrySpecial purpose machinery manufacturingPackaging industryMedical technologyRailway and rail vehicles industryDrive and gear engineeringTelecommunication industryShipbuilding industryOffice machinery and suppliesFittings engineeringAutomotive and vehicle constructionHydraulic and pneumatic industry
Certificates
ISO 9001:2015
ISO 14001
Parts & Machines
Parts (3)
1 / 3
Sondermutter
TechnologyAutomatic turning (bar)
MaterialStainless steel (rust-proof V4A)
Lotsize2500
ComplexityMedium
2 / 3
_png.jpeg)
Drehkranz
TechnologyFull-range turning (including milling)
MaterialAluminium and aluminium alloys
Lotsize500
ComplexityMedium
3 / 3
Rändelmutter / Rändelkappe
TechnologyAutomatic turning (bar)
MaterialCase hardening/tempering steel
Lotsize25000
ComplexityLow
IndustriesDrive and gear engineering
Machinery (24)
1 / 24
Biglia B470 YSM
ManufacturerBiglia
ControlCNC
Year of Construction2004
Technology
Centering / end facingAutomatic turning (bar)Drilling / threading / tappingFull-range milling (including turning)Full-range turning (including milling)Turning
2 / 24
Biglia B445 YSM
ManufacturerBiglia
ControlCNC
Year of Construction2004
Technology
Centering / end facingAutomatic turning (bar)TurningFull-range turning (including milling)Full-range milling (including turning)Drilling / threading / tapping
3 / 24
Biglia B470 YSM
ManufacturerBiglia
ControlCNC
Year of Construction2006
Technology
Drilling / threading / tappingFull-range turning (including milling)Automatic turning (bar)TurningCentering / end facingFull-range milling (including turning)
4 / 24
Biglia 470 YSM
ManufacturerBiglia
ControlCNC
Year of Construction2005
Technology
Full-range milling (including turning)TurningFull-range turning (including milling)Automatic turning (bar)Centering / end facingDrilling / threading / tapping
5 / 24
Biglia B470 YSM
ManufacturerBiglia
ControlCNC
Year of Construction2007
Technology
Full-range milling (including turning)TurningCentering / end facingDrilling / threading / tappingFull-range turning (including milling)Automatic turning (bar)
6 / 24
Biglia B465
ManufacturerBiglia
ControlCNC
Year of Construction2010
Technology
Centering / end facingTurningAutomatic turning (bar)Full-range turning (including milling)Full-range milling (including turning)Drilling / threading / tapping
7 / 24
Biglia Y2
ManufacturerBiglia
ControlCNC
Year of Construction2018
Technology
TurningAutomatic turning (bar)Centering / end facingFull-range turning (including milling)Full-range milling (including turning)Drilling / threading / tapping
8 / 24
Traub TNX 65
ManufacturerTraub | INDEX-Gruppe
ControlCNC
Year of Construction2007
Technology
Drilling / threading / tappingCentering / end facingTurningFull-range milling (including turning)Automatic turning (bar)Full-range turning (including milling)
9 / 24
Inventhor Iridium
ManufacturerInventhor GmbH
ControlCNC
Year of Construction2007
Technology
Drilling / threading / tappingCentering / end facingFull-range turning (including milling)TurningFull-range milling (including turning)
10 / 24
UVA T44
ManufacturerUVA Lidköping
ControlCNC
Year of Construction2012
Technology
Centering / end facingTurningFull-range turning (including milling)Drilling / threading / tappingFull-range milling (including turning)
11 / 24
UVA 550 Plus
ManufacturerUVA Lindköping
ControlCNC
Year of Construction2012
Technology
Full-range turning (including milling)Full-range milling (including turning)Drilling / threading / tappingTurningCentering / end facing
12 / 24
Star SB 16
ManufacturerSTAR Micronics GmbH
ControlNC ; CNC
Year of Construction2004
Technology
Swiss turningFull-range milling (including turning)TurningCentering / end facingFull-range turning (including milling)Drilling / threading / tappingAutomatic turning (bar)
13 / 24
Star SR 32
ManufacturerStar Micronics GmbH
ControlNC ; CNC
Year of Construction2013
Technology
TurningCentering / end facingSwiss turningDrilling / threading / tappingFull-range milling (including turning)Full-range turning (including milling)Automatic turning (bar)
14 / 24
Star SR 20
ManufacturerStar Micronics GmbH
ControlNC ; CNC
Year of Construction2013
Technology
Full-range milling (including turning)Full-range turning (including milling)Drilling / threading / tappingCentering / end facingTurningAutomatic turning (bar)Swiss turning
15 / 24
Star SR 20
ManufacturerStar Micronics GmbH
ControlNC ; CNC
Year of Construction2014
Technology
Drilling / threading / tappingAutomatic turning (bar)TurningCentering / end facingFull-range turning (including milling)Swiss turningFull-range milling (including turning)
16 / 24
Star SR 32
ManufacturerStar Micronics GmbH
ControlNC ; CNC
Year of Construction2014
Technology
Full-range milling (including turning)Swiss turningFull-range turning (including milling)Centering / end facingTurningAutomatic turning (bar)Drilling / threading / tapping
17 / 24
Star SR 20 V
ManufacturerStar Micronics GmbH
ControlNC ; CNC
Year of Construction2018
Technology
Drilling / threading / tappingAutomatic turning (bar)Centering / end facingFull-range turning (including milling)Swiss turningFull-range milling (including turning)Turning
18 / 24
Star SR 32
ManufacturerStar Micronics GmbH
ControlNC ; CNC
Year of Construction2018
Technology
Automatic turning (bar)Full-range milling (including turning)Drilling / threading / tappingTurningCentering / end facingFull-range turning (including milling)Swiss turning
19 / 24
Star SR 20 RIV
ManufacturerStar Micronics GmbH
ControlNC ; CNC
Year of Construction2018
Technology
Swiss turningFull-range turning (including milling)Full-range milling (including turning)Drilling / threading / tappingTurningAutomatic turning (bar)Centering / end facing
20 / 24
Amada Kreissägenautomat
ManufacturerAmada Machinery Europe | Schleif-, Fräs– und Sägetechnologie
ControlNC Automat
21 / 24
Rollmaschine
ManufacturerPee-Wee
ControlNC - gesteuert
22 / 24
Rollmaschine
ManufacturerAbele & Hilt.
ControlNC - gesteuert
23 / 24
Taktteller-Presse / Presse
ManufacturerSchwarz | Schoen
ControlNC - gesteuert
24 / 24
Traub Schlitzmaschine
ManufacturerTraub | INDEX-Gruppe
ControlNC - gesteuert
3 Parts
Automatic turning (bar)2
Full-range turning (including milling)1
24 Machinery
Centering / end facing19
Automatic turning (bar)16
Drilling / threading / tapping19
Full-range milling (including turning)19
Full-range turning (including milling)19
Turning19
Swiss turning8
Contact
Location
Main locationDieselstraße 6, 58840 Plettenberg, Germany
Company contact
Contact persons
HT
Hartmut Tengler
MK
Maximilian Knapstein
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.