Unruh Maschinen-& Werkzeugbau
Germany, 32107 Bad SalzuflenOverview
About Unruh Maschinen-& Werkzeugbau
Who we are
The company Unruh Maschinenbau was founded in September 2016 by Elix Unruh as the owner. The range of services included the contract manufacturing of various milled and turned parts. In August 2017, the company Jansen & Bahlo GmbH in Bad Salzuflen, which had been operating successfully in toolmaking for decades, was taken over. The merger of the two companies resulted in Unruh Maschinen- & Werkzeugbau. With the takeover of the toolmaking company, we were also able to gain very well-trained specialist staff with decades of experience. In the short time, our company recorded very good successes, so that we now employ eight people.
1 / 1
Bad Salzuflen, Germany
Member since 2021
Employees5 - 10
Certificates1
Turnover1 - 5 Mil.
Year of foundation2016
Marketing documents
Competencies
Technologies
Turning
| Technologies | Lotsize | Length | Diameter | Weight |
|---|---|---|---|---|
Turning | 1–10,000 | 1–1,000 mm | 1–320 mm | — |
Automatic turning (bar) | from 1 | from 800 mm | 50–100 mm | — |
Swiss turning | 1–500 k | from 0 mm | from 0 mm | — |
Full-range turning (including milling) | 1–10,000 | 1–2,000 mm | 1–320 mm | — |
Hard turning | 1–1,000 | 1–250 mm | 1–320 mm | — |
Centering / end facing | 1–10,000 | 10–1,500 mm | 10–400 mm | — |
Shaft machining | 1–1,000 | 1–300 mm | 1–300 mm | 0–50 kg |
Milling
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight |
|---|---|---|---|---|---|---|
Milling | 1–5,000 | 1–2,000 mm | 1–500 mm | 1–500 mm | — | — |
Form milling (3 D) | 1–1,000 | 1–2,000 mm | 1–550 mm | 1–550 mm | — | — |
Full-range milling (including turning) | 1–5,000 | 1–2,000 mm | 1–500 mm | 1–500 mm | 1–320 mm | — |
HSC milling | 1–1,000 | 1–2,000 mm | 1–500 mm | 1–500 mm | — | 0–500 kg |
Materials
Plastics/synthetic materials
ThermoplasticsHigh performance plasticThermosetsElastomersNatural and vulcanised rubberGlass fibre-reinforced plasticCarbon fibre-reinforced plasticNatural Fibre Composites (NFC)
Advanced Materials
Nickel alloy (Inconel, Monel, Hastelloy)Carbide
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloys
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Cast metals
Cast steelCast iron
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel
Precious metals
PlatinumOther precious metals
Non-metal inorganic materials
Cast minerals
Industries
Information technology (hardware)Electrical industryDrive and gear engineeringConstruction and architectural suppliesChemical industryRailway and rail vehicles industryPrecision engineering, mechatronics and opticsBoiler, container and tank construction Building, agricultural and forestry machinery manufacturingAir conditioning, refrigeration and ventilation industryMilitary engineeringPaper and printing machinery industryClean room technologyFurniture industryPlant engineering and constructionAutomation and control engineeringAutomotive and vehicle constructionHydraulic and pneumatic industryTelecommunication industryApparatus engineeringLighting industryMining and tunnel engineeringSpecial purpose machinery manufacturingPackaging industryFittings engineeringMedical technologyOffice machinery and suppliesPower generation and transmission industryHousehold appliance industryMeasurement and control technique, laboratory equipmentShipbuilding industryMachine tool manufacturingAerospace and aviation industryMechanical engineering
Certificates
ISO 9001:2008
Parts & Machines
Parts (3)
1 / 3
Werkzeug
TechnologyForm milling (3 D)
MaterialTool steel
Lotsize1
ComplexityLow
IndustriesMachine tool manufacturing
Price per piece€30,000.00
2 / 3
Konstruktion
TechnologyInjection moulds
MaterialTool steel
Dimensions
Width800 mm
Weight600 mm
Length500 mm
Height800 mm
Lotsize1
IndustriesMachine tool manufacturing
Price per piece€30,000.00
3 / 3
Part
TechnologyFull-range turning (including milling)
Lotsize0
Machinery (5)
1 / 5
AXA
ManufacturerAXA
ControlHeidenhain
Technology
MillingForm milling (3 D)
2 / 5
DMU 80
ManufacturerGildemeister
ControlMillPlus
Technology
HSC millingForm milling (3 D)Milling
3 / 5
DMU 60
ManufacturerGildemeister
ControlMillPlus
4 / 5
SQT15MS
ManufacturerMazak
ControlMazatrol
Technology
TurningShaft machiningHard turning
5 / 5
TC67 -H-MC
ManufacturerSpinner
ControlSiemens
Technology
Full-range turning (including milling)Hard turningTurningShaft machining
3 Parts
Form milling (3 D)1
Injection moulds1
Full-range turning (including milling)1
5 Machinery
Milling2
Form milling (3 D)2
HSC milling1
Turning2
Shaft machining2
Hard turning2
Full-range turning (including milling)1
Contact
Location
Main locationMax-Planck-Str.27, 32107 Bad Salzuflen, Germany
Further locationsNRW
Company contact
Contact persons
EU
Elix Unruh
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.