Wilhelm Schmerbeck GmbH
Germany, 58809 Neuenrade
Overview
About Wilhelm Schmerbeck GmbH
Who we are
Are you looking for a partner for professional filming? Then you've come to the right place. From simple turned parts to sophisticated drawn parts, we offer everything your heart desires. Are you looking for a reliable supplier of pressed, stamped, and bent parts? Here, too, we offer you expert advice based on decades of experience. We are happy to accompany you from the pilot series and initial sampling to series production. Tell us your ideas and we will implement them cleverly for you! Numerous companies from the automotive, mechanical engineering, electrical engineering, medical technology, and other industries have been relying on the expertise of our employees for many years. Let us convince you too! Thanks to our high-quality QA, qualified personnel, cost-effective warehousing, and modern ERP system, we are able to execute your orders on time and without errors at all times. Examples of our products: Output shaft, axle, adapter, drive shaft, mount, bolt, bushing, cover, end piece, eccentric, spring, flange, guide, guide roller, housing, threaded ring, half-round rivet, sleeve, insert, taper pin, block, contact pin, roller, sleeve, nut, hub, rivet, plate, bolt, ring, pipe part, round plate, hinge, washer, screw, countersunk rivet, countersunk screw, pin, stud bolt, shaft, angle bracket, gear wheel, cylindrical pin, and much more.
1 / 5
2 / 5
3 / 5
4 / 5
5 / 5
Neuenrade, Germany
Member since 2013
Employees20 - 50
Certificates1
Turnover5 - 10 Mil.
Year of foundation1949
Competencies
Technologies
Turning
| Technologies | Lotsize | Length | Diameter |
|---|---|---|---|
Turning | 500–500,000 | 1–500 mm | 3–65 mm |
Automatic turning (bar) | 500–500,000 | 1–500 mm | 3–65 mm |
Swiss turning | 500–100,000 | 30–300 mm | 3–25 mm |
Full-range turning (including milling) | 50–1 M | 1–500 mm | 2–100 mm |
Sheet Metal Processing
| Technologies | Lotsize | Length | Width | Material thickness |
|---|---|---|---|---|
Laser cutting 2D | 50–1 M | 10–1,000 mm | 10–1,000 mm | 0.1–100 mm |
Bending / folding | 50–10,000 | 10–1,000 mm | — | 0.1–50 mm |
Punching / nibbling | 50–100 k | 10–500 mm | 10–500 mm | 0.1–100 mm |
Water jet cutting
| Technologies | Lotsize | Length | Width | Material thickness |
|---|---|---|---|---|
Water jet cutting 2D | 50–10,000 | 10–1,000 mm | 10–1,000 mm | 0.1–1,000 mm |
Sheet Metal Forming (Stamping, Deep-drawing)
| Technologies | Lotsize | Length | Width | Material thickness |
|---|---|---|---|---|
Punching / pressing (Out-of-tool) | 50–1 M | 10–1,000 mm | 10–500 mm | 0.1–100 mm |
Stamping and bending machine (Bihler) | 50–10,000 | 10–100 mm | 10–100 mm | 0.1–100 mm |
Threading
| Technologies | Lotsize | Length | Diameter |
|---|---|---|---|
Thread rolling | 1–1 M | 5–500 mm | 1–100 mm |
Worm rolling | 1–1 M | 1–500 mm | 1–100 mm |
Wire & Spring Bending
| Technologies | Lotsize | Diameter |
|---|---|---|
Wire bending | 1–1 M | 0.5–100 mm |
Spring bending | 500–1 M | 0.5–100 mm |
Solid Forming
| Technologies | Lotsize | Length | Diameter | Weight |
|---|---|---|---|---|
Drop forging | 100–50,000 | — | — | 0–10 kg |
Impact extrusion | 1–500 k | from 0 mm | from 0 mm | — |
Assembly
| Technologies | Weight |
|---|---|
Mechanical assembly | 0–3 kg |
Assembly Group Manufacturing
| Technologies | Lotsize | Length | Width | Material thickness |
|---|---|---|---|---|
Folding | 1–100 k | — | — | 0.2–10 mm |
Riveting | 1–100 k | 0.5–500 mm | 0.5–200 mm | 0.1–5 mm |
Milling
| Technologies | Lotsize | Length | Width | Height |
|---|---|---|---|---|
Milling | 1–500 k | 0–500 mm | 0–250 mm | 100–500 mm |
Finishing
| Technologies | Lotsize | Length | Width | Height | Weight |
|---|---|---|---|---|---|
Shot blasting | 1–1 M | 1–500 mm | 1–500 mm | 1–500 mm | 0–10 kg |
Rotofinishing, barrel finishing | 1–1 M | 1–500 mm | 1–500 mm | 1–500 mm | — |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Weight |
|---|---|---|---|---|---|
Drilling / threading / tapping | 1–1 M | 10–500 mm | 1–1,000 mm | 1–500 mm | 0–10 kg |
Materials
Advanced Materials
Nickel alloy (Inconel, Monel, Hastelloy)
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloys
Light metals
Aluminium and aluminium alloysTitanium and titanium alloys
Sintered materials
Metal powder for formed partsMetal powder for hard metal
Plastics/synthetic materials
ThermoplasticsHigh performance plasticThermosets
Industries
Electrical industryMedical technologyPower generation and transmission industryMechanical engineeringPrecision engineering, mechatronics and opticsRailway and rail vehicles industryOffice machinery and suppliesFittings engineeringBoiler, container and tank construction Air conditioning, refrigeration and ventilation industryInformation technology (hardware)Apparatus engineeringDrive and gear engineeringAutomation and control engineeringSpecial purpose machinery manufacturingMeasurement and control technique, laboratory equipmentMilitary engineeringHydraulic and pneumatic industryBuilding, agricultural and forestry machinery manufacturingPaper and printing machinery industryMachine tool manufacturingChemical industryAerospace and aviation industryShipbuilding industryFurniture industryHousehold appliance industryAutomotive and vehicle constructionPlant engineering and construction
Certificates
ISO 9001:2015
Parts & Machines
Parts (5)
1 / 5
Adapternippel
DescriptionArtikel: Adapter, Schlauchstück, Tülle, Nippel; Werkstoff: Messing/ Kupfer; Besonderheiten: Gewinde, Hinterstechung, Bohrung
2 / 5
Körper (Querbohrungen)
DescriptionWerkstoff: Stahl/ Edelstahl; Besonderheiten: Querbohrungen
3 / 5
Schlitz (Schrauben)
DescriptionWerkstoffe: Stahl/ Edelstahl/ Aluminium/ Messing; Besonderheiten: Schlitz, Gewinde, Oberfläche, Schraubensicherung, DIN.
Antrieb : Schlitz, Kreuzschlitz (ph/z), Torx (mit und ohne Stift), Inbus
4 / 5
Sechskant
DescriptionWerkstoffe: Messing/ Stahl/ Edelstahl/ Aluminium; Besonderheiten: Sechskant, Gewinde
5 / 5
Drehteile
DescriptionArtikel: Bolzen, Buchsen, Federn, Flansche, Gewindestifte, Klötze, Körper, Muttern, Niete, Scheiben, Schrauben, Stifte, Baugruppen; Werkstoffe: Messing/ Stahl/ Edelstahl/ Aluminium; Besonderheiten: Rändel, Durchgangsbohrung, Querbohrung, Sechskant, Gewinde, Mittel- und Großserien, Treloc, Biloc
5 Parts
Contact
Location
Main locationSchöntaler Weg 5, 58809 Neuenrade, Germany
Further locationsWilhelm Schmerbeck GmbH Schöntaler Weg 5 Neuenrade 58809
Company contact
Contact persons
HH
Helge Hessmer
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.