Aqua Cut GmbH
Germany, 15345 Altlandsberg OT Buchholz
Overview
About Aqua Cut GmbH
Who we are
WHEN WE CUT FROM GOOD! Water jet cutting industry meets In principle, rectangles, circles, ellipses, curved paths (eg, holes, flanges, cutouts, perforated sheets, letters, pipe cuttings, etc.) are produced each geometry of flat and slightly curved surfaces so. The maximum cutting accuracy of our method is: Accuracies: + / - 0.1 mm Water is forced under a pressure of about 4000 bar through a nozzle of 0.2 mm. The water admixed abrasive ensures a "grinding out" the kerf of 1 mm or less. This Mikrozerspanungsprozess hardest materials to be cut. A CNC controlled water jet cutting machine enables cutting of any form of flat plates. Water jet cutting meets craftsmanship With the water jet, almost all materials from aluminum, stainless steel, porcelain tile, ceramic tile, granite, copper, brass, titanium, steel, stone, and non-ferrous metal, glass, ceramic, plastic and composite materials to natural materials such as wood, cork, and Edit rubber without problems. The water jet can simultaneously edit multiple layers of materials. - No deformation due to delay in heating - No burn-off at the cut edges - No hardening in the kerf by temperature - No tempering colors on steel - Clean cut edges with aluminum, brass, copper, etc. - The finest contours with extremely thin bars (tool width 0.8 mm) - Very true to size, so no rework required - Economical even for single parts and small series
1 / 1
Altlandsberg OT Buchholz, Germany
Member since 2004
Employees10 - 20
Certificates1
Year of foundation1999
Competencies
Technologies
Water jet cutting
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Water jet cutting 2D | 1–10,000 | 5–6,500 mm | 5–4,000 mm | from 0 mm | from 0 mm | 0–3,000 kg | 0.5–280 mm |
Water jet cutting, tube & section | 1–10,000 | 5–6,500 mm | 5–4,000 mm | 5–500 mm | 1–500 mm | 0–3,000 kg | 0.5–25 mm |
Measuring & Testing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Measuring / testing | 1–500 | 1–2,400 mm | 1–2,400 mm | 1–1,000 mm | 5–2,400 mm | 0–1,000 kg | from 0 mm |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Drilling / threading / tapping | 1–1,000 | 10–1,270 mm | 10–660 mm | 10–635 mm | from 0 mm | 0–150 kg | from 0 mm |
Materials
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloysSolder
Advanced Materials
Nickel alloy (Inconel, Monel, Hastelloy)CarbideSilicium
Cast metals
Cast steelCast iron
Plastics/synthetic materials
ThermoplasticsThermosetsElastomersSilocone (LSR)Natural and vulcanised rubberGlass fibre-reinforced plasticCarbon fibre-reinforced plasticParticle reinforced composite materialsWood-Plastic-Composites (WPC)Natural Fibre Composites (NFC)
Sintered materials
Metal powder for formed partsMetal powder for hard metal
Precious metals
SilverGoldPlatinumOther precious metals
Natural materials
Wood/timberRock
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Non-metal inorganic materials
CeramicsGlassConcreteCast mineralsGraphite
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel
Industries
Hydraulic and pneumatic industrySpecial purpose machinery manufacturingPlant engineering and constructionMechanical engineeringShipbuilding industryMilitary engineeringDrive and gear engineeringApparatus engineeringElectrical industryPrecision engineering, mechatronics and opticsBoiler, container and tank construction Medical technologyFurniture industryAerospace and aviation industryPaper and printing machinery industryHousehold appliance industryChemical industryMachine tool manufacturingConstruction and architectural suppliesLighting industryBuilding, agricultural and forestry machinery manufacturingRailway and rail vehicles industryAir conditioning, refrigeration and ventilation industryPackaging industryClean room technologyMeasurement and control technique, laboratory equipmentInformation technology (hardware)Telecommunication industryFittings engineeringAutomation and control engineeringMining and tunnel engineeringAutomotive and vehicle constructionOffice machinery and suppliesPower generation and transmission industry
Certificates
ISO 9001:2015
Parts & Machines
Machinery (4)
1 / 4
NC 4020
ManufacturerWATER JET
ControlSiemens 840 D
Year of Construction2008
Technology
Water jet cutting 2D
2 / 4
NC 4060 D6
ManufacturerWATER JET
Control-
Year of Construction2005
Technology
Water jet cutting 2D
3 / 4
Infinite 5024 SC
ManufacturerRomer Hexagon Metrology
Control-
Year of Construction2008
Technology
Measuring / testing
4 / 4
VF-5
ManufacturerHaas
Control-
Year of Construction2007
Technology
Drilling / threading / tapping
4 Machinery
Water jet cutting 2D2
Measuring / testing1
Drilling / threading / tapping1
Contact
Location
Main locationSpitzmühlerstr. 4, 15345 Altlandsberg OT Buchholz, Germany
Company contact
Contact persons
JF
Jens Funke
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.