GépForg 2000 Kft.
Hungary, H-2243 Kóka
Overview
About GépForg 2000 Kft.
Who we are
The site of Gepforg is in Kóka, in Hungary, which is situated 40kms from Budapest. It was founded in 1990 with the participation of private ownership. The manager and also the owner is: Laczkó Ferenc. The history of our company run back over two decades. As a result of dynamic development, at present this medium-sized company uses an up-to-date CNC machine technology. Gepforg supplies different parts to a number of automobile factory and to their suppliers. We produce a wide range of parts (from air conditioner connector to electric motor houses). In 2003, Gepforg introduced the MSZ EN ISO 9001:2001 quality management system. The company is an accurate and a reliable partner because of the practise of the quality assurance according to the international standard and because of the direct contact with the partners. High-qualified, skilled workers provide that the level of both the products and shipping by Gepforg are internationally acknowledged. Our main activities: - CNC countersink ( turning, milling) - Tool design - Tool fabrication - Assembly of simple and complex parts - Aluminium moulding (chill and pressure moulding) - Winding
1 / 1
Kóka, Hungary
Member since 2009
Employees100 - 200
Certificates1
Turnover5 - 10 Mil.
Year of foundation1987
Marketing documents
Competencies
Technologies
Assembly
| Technologies | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|
Mechanical assembly | from 0 mm | from 0 mm | from 0 mm | from 0 mm | 0–250 kg | from 0 mm |
Electromechanical assembly | from 0 mm | from 0 mm | from 0 mm | from 0 mm | 0–250 kg | from 0 mm |
Turning
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Turning | 100–1 M | 1–500 mm | from 0 mm | from 0 mm | 1–280 mm | from 0 kg | from 0 mm |
Automatic turning (bar) | 100–1 M | 1–500 mm | from 0 mm | from 0 mm | 1–280 mm | from 0 kg | from 0 mm |
Measuring & Testing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Measuring / testing | 1–1,000 | 1–600 mm | 1–600 mm | 1–500 mm | 1–400 mm | 0–5 kg | from 0 mm |
Sheet Metal Forming (Stamping, Deep-drawing)
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Punching / pressing (Out-of-tool) | 1,000–100,000 | 30–300 mm | 30–300 mm | from 0 mm | from 0 mm | from 0 kg | from 0 mm |
Mould construction
| Technologies | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|
Pressure die cast molds | 1–2,500 mm | 1–1,500 mm | 1–1,500 mm | from 0 mm | 0–750 kg | from 0 mm |
Gravity casting moulds | 1–2,500 mm | 1–1,500 mm | 1–1,500 mm | from 0 mm | 0–750 kg | from 0 mm |
Modelmaking | 1–2,500 mm | 1–1,500 mm | 1–1,500 mm | from 0 mm | 0–750 kg | from 0 mm |
Casting
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Pressure die casting | 100–100,000 | 1–1,000 mm | 1–750 mm | 1–750 mm | from 0 mm | 0–250 kg | from 0 mm |
Sheet Metal Processing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Punching / nibbling | 100–100,000 | 10–2,500 mm | 10–1,250 mm | from 0 mm | from 0 mm | 0–200 kg | 0.5–8 mm |
Milling
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Milling | 500–500,000 | 4–500 mm | 4–500 mm | 4–300 mm | from 0 mm | 0–15 kg | from 0 mm |
Form milling (3 D) | 500–10,000 | 4–100 mm | 4–100 mm | 4–100 mm | from 0 mm | 0–3 kg | from 0 mm |
Drilling / Sawing
| Technologies | Lotsize | Length | Width | Height | Diameter | Weight | Material thickness |
|---|---|---|---|---|---|---|---|
Drilling / threading / tapping | 500–500,000 | 4–500 mm | 4–500 mm | 4–300 mm | from 0 mm | 0–15 kg | from 0 mm |
Materials
Sintered materials
Metal powder for formed partsMetal powder for hard metal
Steel
Structural steelCase hardening/tempering steelStainless steel (rust-proof V2A)Stainless steel (rust-proof V4A)Free-cutting/mild steelTool steelSpring steelCold extruding steel
Advanced Materials
Nickel alloy (Inconel, Monel, Hastelloy)CarbideSilicium
Plastics/synthetic materials
ThermoplasticsThermosetsElastomersSilocone (LSR)Natural and vulcanised rubberGlass fibre-reinforced plasticCarbon fibre-reinforced plasticParticle reinforced composite materialsWood-Plastic-Composites (WPC)Natural Fibre Composites (NFC)
Heavy metals
Copper-zinc alloys (brass)Copper and copper alloysZinc and zinc alloysSolder
Cast metals
Cast steelCast iron
Non-metal inorganic materials
CeramicsGlassConcreteCast mineralsGraphite
Light metals
Aluminium and aluminium alloysMagnesium and magnesium alloysTitanium and titanium alloys
Precious metals
SilverGoldPlatinumOther precious metals
Natural materials
Wood/timberRock
Industries
Military engineeringMining and tunnel engineeringClean room technologyAutomation and control engineeringLighting industryPackaging industryDrive and gear engineeringBuilding, agricultural and forestry machinery manufacturingChemical industryHousehold appliance industryMachine tool manufacturingAutomotive and vehicle constructionSpecial purpose machinery manufacturingMechanical engineeringInformation technology (hardware)Electrical industryConstruction and architectural suppliesMeasurement and control technique, laboratory equipmentMedical technologyFittings engineeringFurniture industryHydraulic and pneumatic industryPrecision engineering, mechatronics and opticsPaper and printing machinery industryPower generation and transmission industryPlant engineering and constructionApparatus engineeringBoiler, container and tank construction Office machinery and suppliesRailway and rail vehicles industryAir conditioning, refrigeration and ventilation industryTelecommunication industry
Certificates
ISO 14001
Parts & Machines
Machinery (6)
1 / 6
O
ManufacturerOkuma
ControlOkuma
Year of Construction2008
Technology
Turning
2 / 6
TNC
ManufacturerBrother
ControlBrother
Year of Construction2008
Technology
Form milling (3 D)Drilling / threading / tappingMilling
3 / 6
40 Tonne
ManufacturerColombo
Control-
Year of Construction1999
Technology
Punching / pressing (Out-of-tool)
4 / 6
Arista 574
ManufacturerMitutoyo
ControlMitutoyo
Year of Construction2003
Technology
Measuring / testing
5 / 6
FZ 12K W
ManufacturerChiron
ControlSiemens
Year of Construction2007
Technology
Drilling / threading / tappingMilling
6 / 6
ES-L8
ManufacturerOKUMA
ControlOkuma
Technology
TurningAutomatic turning (bar)
6 Machinery
Turning2
Form milling (3 D)1
Drilling / threading / tapping2
Milling2
Punching / pressing (Out-of-tool)1
Measuring / testing1
Automatic turning (bar)1
Contact
Location
Main locationDózsa György út 67, H-2243 Kóka, Hungary
Further locations2243 Koka
Dozsa Gy. ut 67.
Ungarn
Company contact
Contact persons
TP
Tamas Pentek
Are you a supplier?
Find perfectly matching requests.
Are you a buyer?
Submit your request.