The Swabian group of companies around Südkon, based in Aalen-Ebnat, is located in the heart of southern Germany. The metropolitan regions of Stuttgart, Munich, Nuremberg, Rhine-Main and Rhine-Neckar can be easily reached in a maximum of two hours. Südkon offers its customers technical system solutions from a single source and with one point of contact. The group of companies consists of Südkon Plast GmbH, Südkon Kern GmbH and Kern Service Solutions GmbH. All three companies are part of VEMA Group GmbH. Südkon Plast GmbH is active on technical issues and in technical trade. As a member of E/D/E, Europe's largest purchasing and marketing network in the production connection trade, it has access to an electronic logistics center and therefore delivers to its customers within a very short period of time. Südkon Kern GmbH was founded as one of the first contract manufacturers for large parts in southern Germany. It has extensive know-how in processing large components. Kern Service Solutions GmbH acts as a competent and reliable partner in the area of industrial and craft services. Tailored to the interests of its customers and employees, it is a full-service provider or contract partner for individual services. VEMA Group GmbH is a family-run, sustainably operating holding company that focuses on “Made in Germany” and long-term partnerships with its customers and suppliers.

Walle GmbH - Your specialist for turning parts, milling parts, CNC turned parts, CNC Milling, Conventional production, medical We offer the production of turned parts and machined parts according to your wishes. Our machines are on the cutting edge technology of CNC and ensure the highest standard of precision.

We see ourselves as a reliable partner for high-quality complete mold manufacturing solutions. As HemaTec, we are proud to be able to provide individual support to our customers throughout the entire product life cycle. Our portfolio ranges from article or module design, through tool design and mechanical production, to initial sampling and the initial sample test report. We would be happy to take on series production and all associated tasks for you. Our specialty is comprehensive project management, from development to assembly of a finished assembly and its testing - every detail is carefully checked to ensure that our customer receives the best possible result. Our production facility is equipped with cutting-edge equipment and technologies to ensure the highest efficiency and quality.

Our aim is to create products and process innovations using the simplest methods, state-of-the-art technology and attention to detail. Uncomplicated, fast and precise. We develop and produce innovative solutions for the production of plastic injection molded articles.

Evamo is a leading global supplier that, as part of the ZF and Bosch Group, has its origins in the automotive industry and supplies all well-known OEM brands worldwide. With a global, sustainably growing business that comprises around 900 employees in four countries, we generate a total turnover of 230 million euros (as of 2023). Our focus is on high-precision development and manufacturing for a wide range of components for a wide range of industries. In doing so, we rely on the highest precision and quality in accordance with strict IATF 16949 regulations. Our products are manufactured using innovative processing and automation concepts, which enable a wide range of products in small and large series production. Thanks to our state-of-the-art test benches, we can carry out individual functional tests in accordance with your characteristics and specifications. We place great value on quality and transparency throughout the supply chain. For this reason, raw materials, components and auxiliary materials are carefully selected in accordance with the strictest automotive criteria and subjected to extensive quality controls in in-house laboratories from receipt of goods to delivery of the products to our customers. Our expertise covers the production of various components in the µ-range. In our ultra-modern laboratories, we monitor all processes, components and products on a daily basis to ensure the highest quality standards. We use state-of-the-art measurement rooms and processing processes with tight tolerances to carry out high-precision optical and tactile measurements or special measurements for capability and root cause analyses. Evamo is your reliable partner for high-precision contract manufacturing solutions. With our know-how, experience and modern infrastructure, we are here to help you meet your demanding manufacturing requirements.

Since 2008, Getzoo has been a trusted name in pet accessory manufacturing. With over a decade of experience in woodworking, we excel in expertise and passion for our craft. Our state-of-the-art production facilities are equipped with two CNC machines capable of processing large quantities with the utmost precision and efficiency. But our work doesn't just stop at machining. We refine each wooden piece through sanding, drilling, engraving and many other woodworking techniques to ensure that every product that leaves our premises is of the highest quality. Although we specialise in working with multiplex panels, we are flexible and versatile in our manufacturing. We have the ability and expertise to work with other materials to meet the diverse needs of our customers. Why Getzoo. - Experience counts: With over 15 years in the industry, we bring a deep understanding and proven expertise to the manufacturing of pet accessories. - Technological superiority: our CNC machines are not only modern, but also powerful, allowing for fast and efficient production. - Craftsmanship perfection: We treat every wooden part with the utmost care, be it sanding, drilling, engraving or other woodworking techniques. - Versatility: While multiplex panels are our main material, we are also able to work with a variety of other materials to provide customised solutions for our clients. - Quality Promise: Every product that leaves our factory goes through rigorous quality checks to ensure it meets the highest standards. At Getzoo, we pride ourselves on offering innovative and high quality pet accessories based on years of experience and commitment to excellence. Our passion for what we do is reflected in every product we make. Trust Getzoo to deliver the best for your pets.

Bläsing GmbH produces high-quality components for customers in the automotive industry, mechanical and special engineering, electromechanics, precision engineering and medical technology. The core competence lies in the production of control blocks for hydraulic engineering. Here, we see ourselves as a development partner for our customers and provide support from the prototype to the market launch ready for series production.

We are a family-run machining company that specializes in 5-axis milling of aluminum. From material procurement to surface treatment, we are happy to do so. We deliver your drawing parts in full according to our capabilities.

Our vision can be summed up in three words: “CREATE VALUABLE WORK.” This major goal, which we pursue anew every day, is to create optimal solutions for our customers. We find new paths and consistently pursue them. With our machines, our thinking and our actions, we always go one step ahead and don't stop there. It is only for this reason that we have been able to achieve our growth in recent years thanks to satisfied customers. We have a strong and honest partnership with our customers that goes beyond a normal customer-supplier relationship. To put it in a nutshell: If you are looking for CNC cutting technology with high quality, short delivery times and at fair prices, read on now. If not, you are in a good position and have no need to act — congratulations. If so... we would like to briefly present our services to you. We support the following industries: • Semiconductor industry • Vacuum industry • Food and hygiene industry • Racing • Aircraft industry • General Mechanical engineering We offer a comprehensive range of services as follows: • 3-axis CNC milling up to a maximum of 4000x1200x1500 • 5-axis CNC milling up to a maximum of 1800x700x700 • CNC turning • Contract work • Construction • Motorsport parts, VLN endurance racing, BMW Motorsport • Mould making, series parts, construction, prototypes • Full service injection moulded parts • Carbon prototypes, carbon series parts • Micro precision machining • Manufacture of complex parts and free-form surfaces • 5-axis simultaneous • Fixture construction • Assembly manufacturing • prototypes • Serial parts • sheet metal processing • Bent parts • Welded assemblies • plasma cutting • laser cutting • CAD design • CAM programming “Individual, high-quality, tailored to your needs. We start where others stop” — only briefly at the end.

We are experts in special clamping devices, e.g. for the automotive industry - Development, construction & production of new tools - Service, repair & optimization for all manufacturers Family-run for > 30 years

Tecnisata was founded in 1974 with the purpose of producing goods and industrial components. Currently Tecnisata has established itself as an important industrial reference. With an area of 2200 square meters, located in Sintra, Portugal, with a vast and modern machine pool, a project office provided by the most advance parametric software and a quality control office is currently focused on: - manufacture, assembly and testing of special devices - manufacture parts

MIMplus Technologies has great knowledge of innovative manufacturing and assembly technologies with a special focus on high-tech materials. Customers come from the medical, automotive, mechanical engineering and the luxury industry. The company provides support to customers for the selection of the appropriate manufacturing process, the suitable material, the optimization of components or assemblies for the chosen production technology to improve function and cost, determines the required level of automation and manufactures the complete assembly in-house and/or as an extended workbench at selected suppliers. The company also performs all the necessary tests for the extended workbench and purchased parts and thus assumes overall responsibility for assemblies. MIMplus Technologies GmbH & Co. KG, based in Germany near Stuttgart, is a fully owned subsidiary of OBE Holding GmbH, a precision engineering company since 1904 with about 500 employees and production sites in Germany and China.

Max Lehner & Co. AG develops and produces complex components and assemblies made of normal and high-alloy steel. At the company headquarters in Gränichen, around 25 employees produce high-quality products on modern machinery, which are used all over the world.

We are a medium-sized company with 12 motivated employees. The FTS-GmbH has been training your employees together with the IHK as industrial mechanic for 4 years. The DIN 9001 is currently being introduced. Location and other data can be found in the signature, but our WEB page is not up to date. Our satisfied customers include renowned machine manufacturers and industrial PC manufacturers.

As a modern, internationally positioned specialist in the production of precision parts for a wide range of industries and applications, MS XTEC GmbH is characterized by constant progress. Since 1965, we have stood for precision and the consistent development of our service portfolio. Always being at the cutting edge of technology, offering exceptional service and moving forward together with customers — step by step — is our “next” corporate philosophy: High-tech: Next Gen. Service: Next Level. Future: Next Steps As a leading specialist for reliable volume production (even in mass production), you benefit from a distinctive manufacturing depth, process reliability and variety — we focus on your wishes and requirements so that you do not have to make any compromises in terms of quality or efficiency. As precise as the components we manufacture are, so strong is our quality awareness. With short response times and personal support, we ensure that you can always process your parts in a quality-controlled manner and on time.

Krug metal processing - we have been manufacturing high-quality metal products for more than 30 years. From individual components to complex assemblies, you get everything from a single source. Reliable, competent, economical.

When it comes to steel, no one is fooling us! Stauber GmbH from Meckesheim in northern Baden has been selling and processing metal in every form for over 30 years. Whether flat steel or precision flat steel. steel sheets or round steel. Pre-machined steel or crude steel. stainless steel or tool steel. Round steel ground or round steel sawn into discs. Raw or milled steel plates or water-jet cut steel parts to size. Cuts or splits. Pick up or send it yourself. We sell steel in various versions. But aluminum is also one of our competencies. Do you need precisely water-jet cut steel or aluminum parts?

We are a renowned metal construction company and offer a wide range of metalworking services. Our focus is on precision work and the production of high-quality metal products according to the individual requirements of our customers. With our latest addition, the DMG-Mori DMU 50 universal milling machine of the 3rd generation, we are able to carry out complex 5-axis simultaneous processing. This ultra-modern machine enables us to work precisely and efficiently and to guarantee the high quality of our products. Our team of experienced metalworking professionals work closely with our customers to understand their specific requirements and develop tailor-made solutions. We use our many years of experience to produce high-quality metal products that meet the highest standards.