We turn, mill and drill in the middle and small series and special parts production. On request, we also carry out installation work for our customers. Our international customers include the innovative and future-oriented areas such as laser technology, medicine, electronics, and automotive, transmission and mechanical engineering. In modern CNC machines we deal with any materials. CNC turning Our precision turned parts are made of all gängingen materials. We manufacture on CNC lathes are equipped with C-axis feeder and handling systems. We deliver the parts ready to be installed, if necessary gild Laser-labeled and surface-treated to. CNC milling Our precision machined parts are on modern and highly accurate CNC machining centers manufactured. The machines are equipped with 4 axles or with pallet changer. It will handle all common materials. We deliver the parts ready to be installed, if necessary gild Laser-labeled and surface-treated to. Services We deliver the parts ready for installation, sorted and wish ultrasonic cleaned. We install complete assemblies in a variety of mounting techniques (Glue, screws, rivets, etc.). Environment Photovoltaic system Also in terms of environmental protection, we have not remained idle. Since autumn 2003, the solar power plant delivers 33.5 kWp on the company building environmentally friendly power. When selecting the module manufacturer and the assembly also regional companies were considered. So the company hookah solar GbR was commissioned from King field with the supply and installation of the PV system.

Emerging from a locksmith, founded in 1946 in Wattenbek (Schleswig-Holstein) has the Henning Dierk machine and Appparatebau GmbH due to the constant development and expansion of its manufacturing technologies over the years to become a powerful medium supplier for sheet metal parts / metal parts and assemblies mounting developed, as well as competent and reliable partner, flexible now divided into two production sites. To produce high quality sheet metal parts and assemblies a team of experienced and motivated employees is at the Henning GmbH Dierk next to a modern machine park requirement. The long-term and clear corporate philosophy helps that customer requirements are fully met in close cooperation with our customers and suppliers. In the center of all our activities for decades is the customer and their satisfaction. Our aim is to offer cost-effective solutions for our customers, thath short manufacturing and delivery times, a fair price / performance ratio and a consistently high quality of production. This is exactly where our strengths lie. Take advantage of it! We look forward to your projects. We supply to customers from different industries such as - Machinery and equipment - Interior Finishing - Warehouse - Ventilation and Klimabau - Electrical industry - Medical Industry - Authorities Materials - Steel - Stainless Steel - Aluminium - Copper - Brass - Plastic

The company Unimec fabrication AG is a metal processing company which has been active as a supplier and contract manufacturer in the market. The 4 areas machining (CNC milling, CNC turning), sheet metal processing, assembly and welding technology combines Unimec fabrication AG under one roof. The Unimec fabrication AG can offer also challenging items such as highly complex assemblies you thus.

The Gabrijel Aluminium Company is a global-oriented company with a successful tradition since 1964. We offer a wide range of production of high quality aluminium products. Our selection includes technical and decorative components as specified by our customers. With our rich experience and an innovative approach we assist our customers in the development of their aluminium components, providing them with a comprehensive solution "from idea to delivery of quality product".

We are a service company based in the Hildesheim area. Due to two small children 2. 3 years, I got Dirk Zufall to decide to put my work force into the CNC contract manufacturing and to combine work and hobby. Versatility is my motto. Depending on your needs, I can convert my HighZ S-1400 / 105T to various manufacturing processes. So milling, engraving, diamond engraving, cutting, laser engraving, nameplate labeling and much more is possible. The machine is equipped for all imaginable materials. An axis of rotation rounds off the spectrum, so almost all wishes can be fulfilled. I am happy to support you in the production of single pieces and small series, but I am not afraid of larger quantities. If the need arises, the machine is already designed for plasma cutting, I hope for many new and exciting business relationships.

We are a purely family-owned company, the aim of which is short, narrow communication channels so that we can react quickly to customer requests. Our production includes CNC 5-axis milling and CNC turning with driven tools.

Eginoks krom makine sanayi ticaret limited şirketi was founded in 2011. Our goal is to be the first choice company of the clients and, establish long-lasting relationship. Our company carrying out the work diligently serve the turkey.

Officine Longon Srl is a company located in Maser, close to Venice and we are specialized in the manufacturing of components for the furniture industry. Our expertise and problem-solving attitude allow us to be extremely flexible and versatile and to offer customised solutions.

The company Unruh Maschinenbau was founded in September 2016 by Elix Unruh as the owner. The range of services included the contract manufacturing of various milled and turned parts. In August 2017, the company Jansen & Bahlo GmbH in Bad Salzuflen, which had been operating successfully in toolmaking for decades, was taken over. The merger of the two companies resulted in Unruh Maschinen- & Werkzeugbau. With the takeover of the toolmaking company, we were also able to gain very well-trained specialist staff with decades of experience. In the short time, our company recorded very good successes, so that we now employ eight people.

Lumel Alucast is a well known manufacturer of aluminium pressure die casting all over the world. We combine successfully nearly 70-years experience with innovative technologies. We provide comprehensive solutions from designing and execution of tools and moulds, through die casting, machining, painting to assembling. Our castings are supplied in wide range of industries, like: • automotive • automation • heating & cooling • lighting • oil & pumps We have been working according to Quality Systems: ISO 9001:2015, ISO 14001:2015, IATF 16949:2016 and PED Quality Assurance System acc. to Directive 2014/68/EU.

The experience of our designers guaranteeing customers the most appropriate solutions, the high specialisation of our technical staff, the use of the most advanced production technologies and the use of the best steels are the conditions that determine the excellent quality of our products and the competitiveness of our prices. A large stock of semi-finished products, the use of flexible processing cycles, a privileged and collaborative relationship with historical suppliers of steels and consumables, allows us to supplying the customer in a very timely manner. Always direct contact between our Customer Service and the customer, frequent visits to the operating sites, necessary to get to know better the real production requirements and to suggest the appropriate solutions, the awareness and willingness to put our more than fifty years of experience at the customer's disposal are the conditions that allow us to offer our customers a service excellence.

Microniq Ltd.-From design to production! Our company's main activity is the manufacture and development of custom and mass-produced components, machine elements, design, manufacture and on-site installation of devices. We try to fill our spare capacities by contract manufacturing. We are innovative, creative, precise and highly flexible!

The production of a die follows a long process: it starts with the conception of the object, moving through a process simulation aimed at studying the stamping method. Once agreed upon with the client based on production volumes and the designated presses, the design phase begins, which M.C.S. prides itself on for its precision. The manufacturing of the equipment is then immediately undertaken, coordinated by a thorough analysis of the process. M.C.S. also manufactures dies based on designs provided by the client, as is common in the automotive sector. M.C.S. specializes in the construction of dies for the automotive and home appliance sectors, but any sheet metal part can be produced by our team. You design a sheet metal product, and we will manufacture it for you. We handle single-stroke dies, progressive dies, and transfer dies, cooperating to fine-tune the part handling process. Our production flexibility enables us to engage in automatic production of both small and large series of parts with dimensions up to 3 meters, as well as in low-volume production using manual recovery dies. We rely on a team of highly skilled and experienced professionals in the field. One of M.C.S.'s unique characteristics is its advanced processing technology, which keeps the company at the forefront of the industry and ensures very high-quality standards Progressive dies:Our most innovative target Transfer dies:We aim to be a comprehensive partner, assisting the client throughout the entire process until production launch Prototype dies:When time constraints challenge us, prototype tools allow for rapid production and/or enable refinement of the stamping methodology study Milling and subcontracted mechanical processing:With our machinery and flexibility, we enthusiastically embrace the timing and technological challenges presented by the market. We have experience in the petrochemical valve sector, metalworking, and complex mechanical components AUTOMOTIVE INDUSTRY Molds for chassis framework and interior body panels Molds for reinforcement brackets, window lift guides, flanges, and mufflers Molds for components of any type Molds for thick sheet metal Molds for heat shields, including those made of aluminum MILLING MACHINE DEPARTMENT The milling machine data is summarized as follows : 3 x 3-axis milling machines with 5-face machining capability, 3000x2200 mm (10,000 rpm) 3 x 5-axis milling machines with a working area of 1750 x 1400 mm (18,000 rpm) 1 x Okuma milling machine for machining hardened steel and superfine finishes (15,000 rpm) 8 x CNC milling machines for parts up to 1600x1200 mm EDM DEPARTMENT The EDM data is summarized as follows: SODICK AQ400L SODICK AQ600L 2 MITSUBISHI MV2400R ONA BIHLER automation for the production of structural elements with steel, aluminum, copper elements