We deal with on-site production and assembly of stainless steel and aluminum equipments, products and parts. Our Hungarian - owned company was founded in 1996 . Since 1982, the core members have been exclusively engaged in the manufacture and installation of stainless steel equipment, so we have more than thirty years of specialized professional experience. Our office building In the early years we worked in a 100 square meter rental property, which gradually expanded to 200 and then 400 square meters as machines and tools were added. In 2003 we bought a 3,300 square meter stand-alone building. Our current workforce consists of 18 well trained locksmiths and welders. In the 550 square meter workshop you will find machines for sheet metal working, lathes and milling machines, modern welding equipment for welding stainless steel, as well as grinding machines and tools for aesthetic finishing.

PEOPLE WITH EXPERTISE AND EXPERIENCE As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner. ZINC DIE-CASTING With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process. At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410. MIM - Metal Injection Moulding In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness. Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here. PRECISION CUTTING with forming technology In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting. ASSEMBLY SERVICES Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components. TOOLBUILDING We are your partner for mould making, precision stamping tools and devices. The equipment: - CAD / CAM for design and production - sink and wire eroding - Surface, profile and jig grinding - Most modern CNC programming technology - HSC milling - Coordinate measuring technology for form and pattern measurement - Centres for machining - Services from the design to the finished component. In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.

Sport silencer Eisenmann Exhaust Systems GmbH: That is handcrafted perfection of stainless steel. Solutions that fascinate in processing, function, design and sound. - Driven by sound - our motto combines the Eisenmann Exhaust Systems GmbH, has established a partnership with the national and international motorsport. Indicator of this is the committed sponsoring successful racing teams. Translation by Google Translate

CMM is one of the biggest B2B companies in Europe specialised in pipes, sheets and beams laser cutting. The finished product is the result of a drawing provided by the customer or directly realized by CMM Technical Department. Specialized for more than 40 years in the manufacturing and transformation of steel, CMM was among the first Italian companies to introduce the first laser cutting machines for sheet metal, pipes and beams. This innovation has allowed a significant improvement in performance obtaining a high quality level of the complete final product and in line with the customer's objectives. Thanks to its 40 years of experience in steel processing and regular technology investments, CMM has been able to improve its performances and produce high quality products. CMM started as a craft-based family company and became an industrial reliable partner through a constant and efficient collaboration with its customers.

Whether housings, cabinets, welded constructions, a wide variety of components and assemblies for mechanical and plant engineering, we have been specializing in the processing of thin sheets, stainless steel and aluminum for more than 50 years. We mainly produce small and medium-sized series for our customers with the highest precision and on-time delivery. Our great production know-how through many years of experience and the fact that we can map all processes of the metal processing chain in-house enables us to react very flexibly to market changes or special customer requests. Our 60 well-trained skilled workers produce (almost) everything that can be made from sheet metal on around 4,000 m². Our vertical range of manufacture, a comprehensive, modern machine park and many machines that can be specifically tailored to the requirements of our customers ensure time and cost-saving, efficient production processes, especially for small series. Our components are used in all branches of industry, for example agricultural technology, mining, chemical industry, labeling and communication technology, medical, measuring and cleaning technology, phamacy and environmental technology.

ALEGROMEC has open its business as a representative of multiple Romanian metal work companies. Our main goal is to develop long time business relationships with foreign clients, based on quality and mutual benefits. ALEGROMEC can recommend trusted production companies experienced into the following technologies: - milling, form millings, deep hole drillings; - punching and pressing works; - laser cutting, plasma cutting; - combined forming laser and cuttings; - hydraulic punch press CNC; - different types of welding works; - sheet metal bending works; - drilling and boring coordinate works; - milling and grinding works; - mechanicals and hydraulics presses; - powder coating works; - sandblasting works; - galvanising works;

The company Karl Rieker KG was founded in 1936 as a hardware store. Over the years and decades, our focus shifted to the Manufacture of fabricated metal products, in particular the Beschlägebau for furniture and kitchen furniture. Our products in the furniture fittings based on own developments or to customer requests for drawing. Due to the existing machinery we are also capable of other Industries to operate. Punching from coil, lasers, welding on robots, assembly work of assemblies and final inspection, machining of metals. Constructions of new products on 3D CAD systems and a separate tool construction for stamping progressive dies, jigs and fixtures is available. Surface treatment: electroplating, galvanizing, powder coating, painting with long-term partner companies

SHN STANZSCHMIDT GMBH & CO. KG Since 1924, SHN STANZSCHMIDT has been convincing by innovation, top quality and reliability. SHN STANZSCHMIDT is known for high demands on geometry and precision. Whatever your challenges, with SHN STANZSCHMIDT you have the optimal partner. You get everything from one source. We combine development expertise and decades of experience in serial production. This increases your efficiency and benefits. In addition to the development and design, it is the material selection and the appropriate surface that determine your added value and the optimal function of a punched product. Our experts (experts) will advise you on the many options to find the best solution for your requirements. STANZTECHNIK We mainly produce coils with fol- low-cut and follow-up tools. Our production is equipped for all requirements: with eccentric presses of 25 to 250 tons of pressing force.With belt widths up to 300 millimeters. With strip thicknesses starting at 0.15 millimeters and ending at 5.0 millimeters. TOOL We accompany your planned medium- or large-scale production series with production tools Made by SHN STANZSCHMIDT. 1. Advantage: This allows us to support you from the outset in the development and planning of your product idea - technically, logistically and cost-effectively. 2. Advantage: We implement all necessary maintenance measures and repairs flexibly and at short notice. 3. Advantage: By our own toolmaking, we have changes quickly under control. That is why adapting to the product at SHN STANZSCHMIDT is efficient and fast and cost-effective for you.

The core competence is the cutting CNC machining of metals and plastics for turning, milling, drilling, sawing, grinding and EDM sinking. In addition, modules can be made to apparatus, tools or complete machines. There is also the possibility of aluminum Kokillengusses and sheet metal working with the technologies of punching and pulling each with its own tool. In addition, CAD design services are offered based on 3D models. The data exchange with all major CAD formats is possible.

The Demminer Engineering GmbH was founded in 2007 through the acquisition of the insolvent DMT Demminer machines GmbH by the Wilms GmbH. For the production are available in two areas of production 6900 m² of production space. We offer: - Laser cutting - Folding with 7-axis CNC - CNC milling and 5-axis - CNC turning with driven tools - Profile editing - Welding, MIG / TIG / MAG aluminum, stainless steel - Robot welding - Painting - Assembly - Special machinery - Design with ProE Quality production with modern machinery and a team of highly qualified staff is always guaranteed. This includes the training of young skilled workers in a training workshop. A key priority for the company is the issue of quality has turned. Therefore, the path of certification according to DIN EN ISO 9001 since 1996 is successfully broken.

In the area of services and installations, we have 8 assembly team with 16 technicians and 8 service vans. We work primarily in medium to northern Germany, but can realize orders also in other regions. Our focus is on the construction and installation of mobile radio systems, BOS radio, sirens and lightning protection as well as steel structures according EN1090-2. In the field of building construction, we also take over the manufacturing of masts of various types and edge profiles, metal profiles, angle profiles, Z-profiles, C-profiles, hat profiles, blanks, sheet metal blanks, profile steel blanks, pipe blanks, miter cuts, heavy clamps, mast clamps, pipe clamps, special clamps, settlements, sheet developments, welded small parts, bent parts. We are TUV certified ISO 9001: 2008.

The family company with a lot of passion for precision, quality and customer satisfaction. Sirius Maribor d. o. o. (Limited Liability Company) was founded and registered in the District Court of Maribor on October 30 2003. When founded, Sirius Maribor employed 20 workers who produced equipment and technological functional units intended to customers in Austria, as well as in Slovenia (approximately 10 %). The number of employees has risen to 70 due to encouraging work results and increasing demand for our products.

We are innovative company with a worldwide presence with advertising products and products of machine componets. Company owned : - welding robots, - automated CNC production lines and pre-cut machines, - laser tube cutting machine, laser metal sheet cutting machine, - plazma HiFoucs cutting machine, - 3D metal sheet bending machine, - 3 axe milling machine, - turning lathe, welding machines, - stamping machines, - powder coating machine, - and other machineries. Production is focused on the development of the company's own, innovative product concepts and material techniques. The company was founded 1999 and it is located in nothern part of Croatia in Prelog (130 km from Graz, 260 km from Vienna, 550 km from Munich, 850 km from Frankfurt, 1050 km from Berlin, 720 km from Milan and 865 km from Zurich. We are specialized in processing and machining of stainless steel, aluminum and structural steel plates. Also we complete assemblies according to customer specification. Our expertise is in professional team, up to date technology and complete manufacturing process. Due to that at every stage of production we can supervise the quality and delivery time. Please copy and paste the link of our Youtube vides: Company book : http://new.marti.hr/CompanyBook/#p=2 Company video : https://www.youtube.com/watch?time_continue=16&v=7dU3Tmmy-NA Company wood section : https://www.youtube.com/watch?time_continue=1&v=e8UhgaJhWnk Company metal section : https://www.youtube.com/watch?v=eHGO9gSudn0 Space concept : https://www.youtube.com/watch?v=8CoEE6UOEqo

Wagner Zerspanungstechnik GmbH & Co KG and its participating companies produce iron and non-ferrous metals for various industrial sectors. Main product groups are: - Milled and turned parts - Aluminum die castings - Aluminum extrusion profiles - Stamped and extruded parts It can be used for small batches, prototypes and large series.

Our Company's History and Development Tometh KFT was founded in 1997 as the successor to a sole proprietorship that had been operating for five years, with the aim of providing high-tech solutions for the engineering industry, prioritizing customer needs. Over the years, we have continuously expanded our workforce and machine park. Today, we operate more than 20 modern, computer-controlled production equipment, and our team has grown to 52 employees. We have been operating our ISO 9001 quality management system since 2002, which is now fully integrated into our in-house developed production management system, supporting quality-focused manufacturing. In addition, in 2019, we implemented the ISO 14001:2015 environmental management system, reaffirming our commitment to sustainability and environmental responsibility. We utilize a modern enterprise management and MES system in production, and we have been operating paperlessly for nearly 12 years, with a strong emphasis on digital systems for data collection and statistical analysis. Our goal is to achieve robotic machine servicing for medium-batch production (1-500 units) and to implement robotic shop floor logistics. We already have operational divisions in this area, supporting efficient and innovative production. Through technological developments, we have also established the conditions for manufacturing and assembling assembled units. Currently, we produce 50-100 different assembled units and over 1,000 types of parts, regularly serving about 20 clients. In recent years, small-batch assembled unit production has opened up a new, strategic field for us. We use our CAD-CAM systems not only to support our own manufacturing processes but also to provide design and prototype manufacturing services for our clients. Our goal is to offer long-term, value-added partnerships to our customers through our modern technological expertise, contributing to their competitiveness and success.

Since 2013, the company offers BK-Metallbau GmbH as small business to their services. We manufacture a system supplier with the highest standards in the field of mechanical and plant engineering, focusing Dryers for sawdust. Our strength are also welded assemblies of all kinds that we also with modern welding machines in Trans Synergic MIG MAG method and TIG process. By own welding engineer We offer our customers welding technology with the highest degree. Our construction office qualified Auto CAD draftsman are always at pains what planning and Drawing technique relates to support our customers. For a necessary heat and surface treatment are of course proven Partners in the areas of painting, galvanizing and powder coating. We process your request as quickly as possible, and are also willing to visit locally. Translation by Google Translate

We are a mittelständiches company with about 10 employees. We are manufacturer and supplier of vacuum vapor deposition for the packaging and semiconductor industries and the construction of special machines for sheet metal machining and toolmaking. We have our own mechanical production with three CNC milling machines and two CNC lathes and other three conventional lathes, a hydraulic drawing press, a CNC band saw, several punching machines and other machines around the metalworking including a welding and electrical cabinets. All systems can be manufactured according to your specifications or designed by us on request, built, electrically connected and put into operation. Our assembly hall is 20x50m and has a 25t Kran.Einzelstücke up to 4500mm width, 3500mm 15000mm length and height are at a stretch without special effort transportable,. ITM GmbH was able to become successful in the fields of special purpose machinery, vacuum technology, prototyping and cryo-technology and through expertise and experiencevm position. Products such as vacuum vapor deposition, vapor deposition, cold traps and punching tools are made by an experienced employee base. When special machine and fixtures, cutting tool making and in the cryo-technique individual customer requirements are accurately implemented. As a reliable partner, we offer you in cold traps and Meisnerfallen from the cryo-technology excellent quality. Whether vacuum technology, vacuum vapor deposition or Gauge, permanent material control is self-evident for us.Our high quality metallizers find, among other things their use in the food industry. Special machine development · Vacuum Systems Solar Technology · Special machine construction · High vacuum evaporation systems · Special machinery manufacturing · Molds · injection molding tools · Special machine · Special tools · cutting tooling · cutting tools · Meisnerfallen · Prototype · Vacuum engineering · Cryo-technology · cold traps · Gauge · metallizers · vacuum vapor deposition We manufacture turned parts with diameters from 8mm to 50mm of the rod (also complete processing), larger diameter up to 250mm and length up to 450mm from semi-finished or Sägezuschnitten (CNC) and up to 800mm diameter and 2500mm length conventionally. We can accommodate up to 1.5 t edit milled parts, depending on the overall size (largest axis travel X-axis: 1200mm). Materials: We process plastics (PTFE, POM, PEEK), steel, stainless steel (1.4301, 1.4305, 1.4571, 1.2301,

Buerstätte stamping and forming Your competent partner for stamping parts, bending parts and deep drawn parts • In-house tool with its own design • Own prototypes built • punching machines up to 300 tons press force and 8 mm thickness for stampings progressive dies • Deep drawing presses up to 600 tons press power and up to 20 mm sheet thickness for deep drawn parts, bending parts and stampings • Buerstätte specializes in stamping parts with small to average annual production amounts • Typical annual quantities of 500 pieces to 500,000 pieces • Buerstätte is extremely flexibly to your deadlines • Quality according to ISO 9001:2008 The two basic production lines be as follows: Production of medium and large series Stamping parts, bending parts and deep drawn parts Stamping parts in batches of 5000-500000 piece Production on composite tools Production via stamping presses up to 300t pressure Material thickness up to 8 mm Punching from slit strip (hot rolled, cold rolled and stainless steel) Bandwidth up to 350 mm Production of small and medium series, inlaid intricate parts Stamping parts, bending parts and deep drawn parts Stamping parts in lot sizes from 500 to approximately 5,000 Production of stamped parts and bent parts on eccentric presses between 35t and 180t printing performance Production of deep drawn parts and bent parts on hydraulic presses between 40t and 600t printing performance Material thicknesses up to 20 mm Punching sheet metal strip Strip widths from 15 mm to 500 mm Company Information • Founded in 1961 - almost 50 years of experience and innovation for your stamping parts, bending parts and deep drawn parts • 30 employees • family - famili

As a medium-sized company, which originally comes from the electrical engineering sector, we have developed into a powerful partner in the field of housing construction and sheet metal processing. In the area of housing construction, we can fall back on our own program, which ranges from small and table housings to cabinet solutions, which we can also adapt to customer specifications. In addition, we are also active in the field of contract manufacturing, where we implement customer-specific projects, be it from laser or folded parts to welded constructions or sheet metal assemblies.