Quality is our passion. Following this motto, we have been working for years in close cooperation with our customers. Thanks to modern technology, we meet high-precision requirements. Richard Hoffmann GmbH & Co.KG (Ri-Ho) has been active in the field of turning and threading for decades. In addition to the production of standard parts, we have specialized in the production of workpieces to drawing.

MWS cast aluminum produced at the two sites in Kufstein and Klagenfurt, with around 140 employees, sand castings and permanent mold castings in all standard aluminum and alloys. Every year, more than 700,000 works of our castings. Our company is authorized and approved by almost all German car producers as a supplier. Kufstein factory / Schwoich (HQ) - Central management - Prototype production - Gravity die casting series production Work Klagenfurt - Handgeformte small series - Machine Shaped medium series - Great Shows on automatic molding line

A brief introduction We employ metal machinists, a shortage occupation in metal industry nowadays, who produce small series of special parts on traditional machines. In this sector CNC machines are so widely used that there is a shortage of traditional machines and excess demand exists for them. With this in mind, we will purchase several traditional machines during our current developments to increase our capacity in this field. We, of course, have CNC machines as well and develop our machine pool regularly. Based on the orders received, we are able to draw up a production program for 1 month in advance and allocate our resources. Our customers basically include producers which manufacture special purpose machines for their customers (e.g. manufacturers in printing industry, shipyards, industrial scale manufacturers, food producers, automotive industry, manufacturers of medical equipment), and we produce components needed for these machines. BAT tobacco factory is included among our customers, and we manufacture wear/consumable parts required for their daily production. We produce components and subassemblies for medical equipment manufactured by Siemens and GE factories. Besides, we supply units for robotic production lines of AUDI and VW factories. The company had its first premises at the residence of the founders in Pécs. Production took place in a small workshop. At the beginning temporary workers were working in addition to a single permanent worker. The first orders we received involved simple processing of materials. In addition to manufacturing new products, we undertook and still undertake to carry out repair works. We undertook all works therefore outgrew the small workshop we used at the beginning, and in 2007 at Pécs-Hird we acquired our first production hall suitable for carrying out industrial activities with a floor space of approximately 250 m2. Here we were able to carry out production on a larger scale and serve more customers. Owing to our continuous progress and current developments, now the floor area of the production hall exceeds 1000 m2. Concerning work organization, our activities include manufacture and assembly of special-purpose products, machines and machine units. Therefore our machines and equipment are universal and able to satisfy all demands.

The Industrial Bearing Branch produces hydrodynamic bearings and labyrinth seals for use in critical rotating equipment, such as turbines, compressors, generators, motors and industrial pumps. Our fluid film bearings are used in power generation as well as in the oil and gas industry and the petrochemical industry.

Rasche was founded in 1925 and is still a family-run company today. Our core competence lies in complex formed parts with high precision. For this purpose, we have separated from old machines in recent years and replaced them with new machines. CNC processing has also been integrated in our company for several years, so that we can produce ready-to-install parts. We can also carry out a heat treatment or surface coating with our long-term partners. If we have piqued your interest, we look forward to your inquiries.

CNC series machining of turned and milled parts in high quality In our CNC subcontracting division, various cast and forged parts in annual quantities of 1,000 to 1.5 million pieces are machined on CNC machining and turning centers. There are currently 30 machines in use in Amkon's Plant II, which are looked after by our employees in two or three shifts. CNC subcontracting was certified for the first time in 2008 according to the DIN EN ISO 9001 quality management system. In series processing, we attach great importance to consistent product quality. It is therefore a matter of course for us to check and document the manufactured parts accordingly. An air-conditioned precision measuring room with the appropriate measuring technology in the form of measuring equipment and measuring systems is available for this. 3D measuring machine Zeiss DuraMax for measuring all parts in the measuring room Conturograph Optacom VC-10 for measuring complex contours Optical measuring device Hommel opticline C514 for serial measurement of turned parts

Karabudak METAL INDUSTRY; It was established in 1997 and serves in the field of contract and machinery manufacturing. In the last period of production, it has undersigned many products with its experienced and technical personnel. It aims to increase this number with its employees in the future without sacrificing quality. Our company has been a guarantee of providing experience, validity and reliability to its customers since its establishment. Our company continuously improves its product and service quality with high automation and flexibility concepts in order to provide higher quality products and more comprehensive support. Our company; Food Machinery, Agricultural Machinery, construction machinery, Hydraulic equipment, Metal processing machinery, concrete machinery, mold manufacturing, defense industry products, Valve equipment and contract manufacturing. Our company, which has the necessary materials, knowledge, team and equipment to fulfill its commitments in a timely and complete manner, always aims to do the best and to continuously increase customer satisfaction.

Manufacturing without limits: turning, milling, eroding, grinding, engraving, laser marking, ... benefit from our hughe and various collection of machines on four locations. Your stock stads by us - over 4.000 materials, alu, steel, stainless steel, titanium, tec. plastic, ceramic-glass, ... We twist for you - ask for impossibilities, our sheet metal forming realizes it. The word is colorful - our longterm experience of perfect surface finishes. Quality is no accident - our optimized quality management. Save paper, time and nerves - the best quality in the right place at the right time, all from a single source. We look forward to all questions, not only to inquiries. For more than 30 years Mühlbauer AG has been a proven partner for the provision of high quality precision components. It all started with a small lathe, from that we have developed into a globally operating company, which realizes all wishes concerning precision around the globe. From consulting, construction and prototype construction via manufacturing including surface finishing up to the installation of complex single components or whole machines, we have everything you will need for an optimum result.

We are a certified according to DIN EN ISO 9001-2008 company, which for over 25 years, turning and milling parts and finished assemblies, in high quality for machine manufactures. Our long-time customers come from the areas of machine and plant construction, control and regulation technology, as well as the device, and means of conveyance. We will provide a list of references is available upon request to. Delivery reliability and high quality standards are a matter of course for us. If you need precision parts in the field of turning, milling or assemblies, please ask us, we will make you an offer. Metalworking We supply more than 25 years turning and milling parts and finished assemblies for mechanical engineering. We guarantee quality and reliability through the use of our trained staff, sense of duty and the use of modern machines. We process all major quality steels, non-ferrous and non-ferrous metals, stainless steels and special materials, with optional certificate. We manufacture the individual parts to Serienlosgröße of about 50,000. Our Services * CNC turning * CNC Milling * Assemblies * Surface Technology * Saws * Additional edits

Welcome to Manfred Zaiser GmbH. We are your specialist for turning chuck and shaft parts from lot size 1 We process steel, stainless steel, brass, aluminum and plastic from diameter 10 to 300 mm. Challenge us, when it comes to precision turned parts at competitive prices and on-time delivery.

Taenzler Maschinen- und Anlagenbau GmbH was founded in 2004 by master mechanical engineer Mr. Mario Taenzler in Laußnitz, near Dresden. Since then, TMA has been a continuously growing company with extensive know-how, clever minds and the latest generation of technology. 45 highly motivated employees are currently developing, programming and manufacturing conveyor systems, special machines and CNC parts with the highest precision. Every day in both areas of the company - plant construction and mechanical production - great things are created, implemented and perfected. This is appreciated by customers from a wide range of industries, such as the automotive, printing industry or window construction, where a reliable partnership and business relationship has developed with each individual.

Located in Moutier, in the Swiss Jura, an area with a rich history in the machine tool and precision turning industry, Ricci & Mottaz leverages its expertise to produce high-precision components. We offer a wide range of products that meet the requirements and expectations of each customer. ISO 9001 certified, we are continuously committed to improvement and place customer satisfaction at the heart of our concerns. Our commitments: - Excellence and Precision : We pay meticulous atention to detail - Rigourous control : We implement strict quality control of parts before shipment - Partnership spirit : We value your feedback and are committed to continuously improving our services to better meet your expectations and anticipate future needs - Innovation : We provide tailor-made solutions to support our clients in their projects - People and culture : We emphasize human values, fostering a collaborative and respectful work environment

Our roots go back to the Grundig company in the 1950s. In 2000, PMS 724 GmbH spun off as an independent company. Under Grundig there were still two departments, consisting of prototype construction and parts production, and today we are a system supplier for special machine manufacturers, which has 50 employees and many years of experience in parts production and jig construction.

High quality CNC lathe and baldachinsteben using advanced CNC machinery and qualified personnel from all materials, especially made of special materials - this is our profession. With decades of experience and modern facilities in the area of machining, we can guarantee our customers 100 percent satisfaction. Product groups: CNC turned parts, CNC machined parts, precision parts, pre-production, series production Types of material: Steel, stainless steel, aluminum, brass, copper, plastic, tool steel, hardened and tempered steel Special materials (Nimonic, Invar, tantalum, etc.), cast Areas of application: Our products are used in the automotive industry, mechanical engineering, medical and many other industries. Material finishing: Hardening, grinding, and various surface treatments we offer with our partners. Lot size: 1 piece

Sistemska tehnika hat langjährige Erfahrung bei der mechanischen Bearbeitung von großen Guss-, Schmiede- und Schweißstücken. Wir können Ihnen Fertig- oder Vorbearbeitete Teile in verschiedenen Abmessungen anbieten, auch Lohnbearbeitung wenn Sie das brauchen. Kurzer Auszug aus Maschinenpark: • Bohrwerke (CNC) – Stücke bis 40t, bis 8M Länge • Drehen (CNC) – Karussel Drehbänke bis 35t, bis 4,200mm Durchmesser • Drehen zwischen Spitzen – 9t, Bearbeitung bis zu 8M • Schleifen – Werkstückgewicht – 9t, Durchmesser bis 750mm, 6M Länge • Tiefbohren – Werkstücke bis 10t, Bohrtiefe bis 8,5M • Schweißen – Anspruchsvolle Anwendungen • Wärmebehandlung – eigene Technologie und langjährige Erfahrung • 3D-Koordinaten Messmaschine (3x3x6M) • Eigenes Prüfungslabor (Non-Destructive Testing) Meistens werden Produkte auf Grund der Dokumentation des Kunden hergestellt – wir selbst haben im Bereich Komponenten und Maschinenteile eigentlich keine eigene Entwicklung. Die Dokumentation ist also meistens Kundeneigentum und wird als solches auch behandelt. Sistemska tehnika ist schon seit 1996 mit ISO9001, ISO14001 zertifiziert. Über 85% der Fertigung ist für Export, Hauptmarkt Deutschland.

Company description Our family business with 20 employees since 1955 manufactures single and serial parts and complete assemblies for industry and craft according to customer drawings. We have 16 modern CNC turning and milling centers where we can process a wide range of different materials from metal and plastic. Our customers already benefit in the Konstuktionsphase by our advice and our know-how in manufacturing technical questions. Products CNC turned parts of Durchmesser1 to 300mm, length up to 500mm Automatic turning and rotating milled parts up to diameter 42mm Range of turning and rotating milled parts up to diameter 150mm and length 150mm CNC milled parts up to 500 * 400 * 400mm CNC milled parts of rod 4 Axis up to diameter 65mm, length 250mm cubic parts to page Vibratory finishing parts, drum size 200 and 400 liters Complete assemblies including assembly from self-manufactured components plus purchased parts Industries: Engineering, systems engineering, drive and transmission technique, apparatus engineering, hydraulics, pneumatics, automotive, commercial vehicle, automation technology, control engineering, chemical industry, optics, film equipment manufacturing, camera design, transducer production, water purification, medical technology, laser technology, steel construction, techn. Craft Materials Steel, stainless steel (1.4104, 1.4301, 1.4305, 1.4401, 1.4571), aluminum, brass, bronze, copper, titanium Plastics:

ALUWA - your expert in the field of metal processing Our company can look back on a long tradition. Founded in 1923 from a plumber's business, it has specialized in the manufacture of household tableware from aluminum and stamped products for many years. Through continuous further development based on this tradition and based on many years of experience, an efficient company for the production of sheet metal parts has emerged in recent years. The quality, reliability and innovation of our production enable a wide variety of tasks to be solved.

We are a young company founded on 01.07.2025, We have a small but decent machine park. From turning on a CTX 400 to milling on a DMU 80 T (5-axis), we do everything that is possible. In addition to milling and turning, we also offer laser engraving, for example, to be able to mark certain components. We also have the option to offer precise 3D resin printing for prototypes.

Visit our website