Specializing in cutting and CNC machining of precision parts from a diameter of 4 to 65mm in most metals, our business since 75 years plusd e meets the expectations of the automotive industries and implementing a fluid from pre-series to mass production.

Production of prototype to large series parts as well as construction, planning and implementation of special machines and devices of all kinds. We are also, with great personal enthusiasm, active in many areas of motorsport, from supporting regional motorcycle manufacturers to Formula 1.

The company Jakob Schäfer was in Kaiserslautern, Mühlstr in 1926. 9 of machinist - champion Jacob Schaefer founded. Mr. Jacob Schaefer worked in the tool room Pfaff , where he took his master's certificate in 1919. First founded Mr. Shepherd has entered the bicycle mechanic Guild, and worked as a guild master. It then bicycles and motorcycles were sold and repaired. Before the second World War II was furnished a cylinder grinding and turning shop. 1944 destroyed a bomb attack the entire operation including residential house and a shop. After the war, Mr. Schaefer from the ruins of an emergency shelter built with a small workshop. Companies - with the currency reform, the structure of today's "Shepherd" began. House and workshop were created again. In parallel with the vehicle sales and the turning shop was built, so that in 1950 the first jacks, the Federal Railroad Central Office, could be sold in Speyer at the time. The two operating branches vehicle and turned parts production had increased to 1955 so that the existing business premises were no longer sufficient. Therefore, in 1955 the purchase of a hitherto community-owned 10,000 square meters of grounds with a building of 300 square meters floor area and 200 sqm floor. The turning shop was moved to Weilerbach and managed separately from the vehicle sale as KG. As a complementary acted Mr. Jacob Schaefer, limited partners were Mr. and Mrs. Hedy Werner Hilbrath Hilbrath. Since 01.01.2001 is also Jutta scouring manager and responsible for business administration and the personnel office. As of 01.01.1982 the sole proprietorship was changed into a limited liability company. Managing partner was initially Dipl.-Ing. Werner Hilbrath. Since 01.01.1995 Mr. Mechanical engineer Rüdiger scouring held this position. Shareholders are Elke Palm, born Hilbrath and Mrs. Jutta Scheuer, bornHilbrath. In 1990 the office building was enlarged by 100 square meters. After the construction of an additional hall in 1998 the operation are around 2,500 square meters of covered factory area available. Currently, the annual turnover of 4.5 million euros at an average of 45 employees. The GL is based on German quality and the production does not outsource to neighboring countries. The rest of the year, the company under the slogan "Quality ensures the future"

Our electronic and mechanical production are to be employed in a position for you in the area of system construction. We assemble your PCBs, assemble and test your Baugrupppen and devices. We mill and turn your parts.

The company Zeiske-GmbH, based in Monheim Rhld., manufactures and sells turned and milled parts of the highest precision. Its customers are in the general mechanical engineering, plant engineering, transport engineering and Deutsche Bundesbahn industries

• Part-production according to drawings or customer specification • Assembly of parts to complex assemblies • Commissioning including functional control of these assemblies

The ALSO Präzisionsdrehteile GmbH & Co. KG is a powerful regional supply company Stuttgart - Vaihingen. Since 1953, the company manufactures high-precision turning and milling parts for the automotive and supplier industry and the consumer goods industry. The company specializes in high numbers (up to 5 million pieces / year) specialized and value-added products. In cooperation with the customers demanding tasks are solved self.

As an owner-managed and medium-sized company, KOHLHAGE has been successful on the market for more than 90 years and can build on this wealth of experience. More than 180 well-trained and committed employees make KOHLHAGE one of the top addresses when it comes to finding solutions for demanding metal processing tasks. KOHLHAGE develops and produces: prototypes, pre-series models, small, large and very large series. KOHLHAGE is certified in accordance with IATF 16949:2016, ISO 9001:2015 and VDA 6. 2:2017 KOHLHAGE customers can be found in the automotive sector, mechanical engineering, the plastics industry and many other sectors in Germany, Europe and the rest of the world.

We are DIN EN ISO 9001: 2008 and DIN EN 15085-2 CL4! Our company, the Herzsprung turned parts or AFT Manufacturing Technology and Trading GmbH, manufactures of all common and commercially available materials on CNC lathes and machining centers precision parts for: Engineering / Sonderanlagenbau Automotive / motorcycle technology Plants and wind power technology Medical Electrical refrigeration technology Stainless steel fittings u. Special for the food industry Machining of cast blanks (aluminum, steel u. Cast iron) Facade and Fasteners (Special dowels for facade assembly) Our highly qualified employees put our know-how to the most modern machines in our products. We manufacture according to customer drawings and / or samples. We also offer a wide variety of finishes of surfaces and premium payment method. Our offer is complemented by wage saws, Module assembly and packaging. You are looking for a service provider who accepts competent and high quality production of your components? With us you are at the right address. Our ultimate goal is to help you always to pass only the best products. Our strict quality management makes this possible. We are DIN EN ISO 9001: 2008 and DIN EN 15085-2 CL4! Translation by Google Translate

we produce in our wide network. Our focus is on project management and process management. Due to our network, we can deliver inexpensive production in the desired quality. Controlled by professional project management.

Precision CNC Machining 3-axis Milling and 5-axis Milling CNC Turning CNC Millturn Wire and spark Erosion Injection molds Injection molding Die Stamping

The working principles of Csaba Tool GmbH: Our most important goal is customer satisfaction, which is why we do everything we can to ensure quality and timely delivery. Cooperation with customers right from the component design phase (feasibility). Cost efficiency, always using the most advanced technologies available. Motivate and train employees. Long-term sustainability with new developments and innovation. The history of 100% Hungarian-owned Csaba Tool Kft. dates back to September 2016 when we began our activities at Ajka Industrial Park. Our main activity is mold and tool making: On behalf of Kumtemjelt, we design and manufacture plastic injection and aluminum die casting tools, prototype tools and punching tools. We work closely with our customers right from the first phase of component design. We believe that, among other things, by training and motivating our employees, we can ensure that our services always meet all customer requirements — while strictly meeting the deadline, of course. That is why innovation has become one of the cornerstones of our company: We are constantly introducing new developments in the interests of long-term sustainability. In line with this company policy, our team of excellent specialists has carried out all orders in a machine park that is equipped with the latest technology and always strives for perfection.

At IMD Metal, we pride ourselves on our modern and extensive machine park, which allows us to meet the most diverse client requirements. Backed by 20 years of experience in both domestic and international markets, our expertise ensures precision, efficiency, and high quality for all our final products. We are equipped with: 6 CNC Milling Machines: Our computer-controlled milling machines are at the heart of our production, enabling us to manufacture complex parts with exceptional precision. They are ideal for processing a wide range of materials and for projects requiring detailed and multi-axis machining. 2 CNC Lathes: With our CNC lathes, we are capable of performing precise machining of rotational parts. They guarantee fast and efficient production of components with a high-quality finish. This combination of advanced CNC technology and two decades of industry knowledge allows us to consistently deliver products that meet the highest standards of quality and tolerance.

3DCut company offers customers a wide range of products made of stainless steel, aluminum, and ferrous metals. We are focused on manufacturing of component parts with higher requirements.

Independent is a machine tool manufacturer with a focus on a high level of integration. Servo and asynchronous motor drivers are also available, which cover the entire field of high-frequency drives up to the 100 kW range. When it comes to manufacturing, Independendend's strength lies in the processing of hardened high-performance tool steels. The unusual main focus means that development support, advice and the production of complex parts can be offered from a single source.

Mechanical manufacturing — expertise and precision under one roof CNC turning up to ø400 x L900 and automated up to ø32mm. CNC milling, 5-axis simultaneous, 750x650x560 Hypermill CAD/CAM 3D coordinate measurement against model, 800x600x400 Customer satisfaction is our top priority. Particular emphasis is placed on quality, timely deliveries and flexibility. That is why we work every day to improve in order to satisfy the sometimes very high requirements and needs of our customers.

Turning and milling work

Our company, with 20 employees, currently occupies about 4000 square meters of covered space and has an annual turnover approaching 6 million euros. Our production includes approximately 900 different parts supplied to customers worldwide, including: Germany United Kingdom Ireland Netherlands Slovakia China United States Mexico In the USA, our warehouse, supplied from Italy, delivers directly to North and South America. Over 50% of the finished products (pieces) are stocked in our warehouses in Italy and the USA, available for immediate delivery. Our current machinery includes: 05 full CNC multi-spindle machines up to 45mm bar passage (Tornos / Utimac) 13 sliding headstock lathes up to 38mm bar passage (Star / Hanwha) 09 multitasking twin-turret lathes up to 65mm bar passage (Biglia / Muratec) Certifications: - ISO 9001:2015 - IATF 16949:2016.