Consultancy, prototypes and series parts For more than 50 years Sass-metal manufactures drawing, deep drawing and bending parts especially for the rubber processing industry. After the experience gained we support at an early stage of development very strictly to our clients in the development and improvement of rubber-metal parts. With the help of in-house design (SolidWorks) the designs can be quickly implemented in tools and prototypes in our own tool. Already in this phase is taken by using a robust quality to mass production techniques. For series production will be built depending on the part geometry insertion progressive or transfer dies. In the part surface (oiled, washed or provided with corrosion protection) take note of the special requirements of vulcanization. As the base material cold and hot bands are used in the thickness range between 1 and 5 mm. To meet the need for lighter components, we also process steel up to 600 N / mm ². Articles of our production, please refer to: Air springs, Metal rubber elements Vibration elements, Hydrobearings, Chassis suspensions, Motor bearings and Machinery bearings. Our range includes: Butted and clinched rings as a substitute for pipe sections, Support rings, Reinforcement rings, Pole plates and flywheels for the electrical industry and Fußkufen for the furniture industry The initial sampling and ensuring the quality in series production takes place according to the established in the automotive industry standards. We are certified to ISO 9000:2008. We look forward to your inquiry.

For a global customer base in Automotive and Industry, the Bavarian-based Bock1 GmbH & Co KG manufactures ambitious components in aluminum, plastic and polyurethane. The company is certified regarding DIN EN ISO 9001, VDA 6.1 and an environmental management committed to the requirements of DIN EN ISO 14001. At its worldwide production sites in Bavaria, Thuringia, Hungary, Canada and China Bock1 offers aluminum-diecasting, thermoplastics injection molding and polyurethane foam processing. Mechanical machining and surface finish complete our profile. The necessary molds come from our own production sites in Germany, Hungary and China. We are specialized in free-form surfaces tools up to a total weight of 12 tons. We are a family-owned company with more then 40 years experience in plastic injection molding and aluminum-diecasting. May we convince you with our smart concepts?

Ciemme 80 is an Italian company based in the Emilia-Romagna active. We operate in machining. With over 30 years experience in the field of metalworking, Ciemme 80 manufactured according to customer demand high-quality turned and milled parts in all materials. Are manufactured items, smaller series, prototypes and complete modules especially for industries automation, mechanical engineering, automotive industry, metallurgy, beverage, and pharmaceutical industries. The company sees itself as a system supplier. Ciemme 80 has in addition to traditional machines with the latest CNC technology to 5-axis machining as well as a powerful CAD / CAM system (SOLIDWORKS / SOLID CAM). Various other services such as surface treatments, heat treatments, electrical discharge machining, gear cutting, grinding or other machining operations do not pose a problem Next Korresp.: en Enquiries to: CIEMME 80 srl, Uta Wetzler, Via Monte Bianco 29, 41042 Fiorano (MO), Mobile: +39 340 6019533, E-mail: wetzler@ciemme80.it, Office. Tel +39 0536 843490, www.ciemme80.it

Chemical Machining SpA manufactures components by chemical photo section and laser micro cutting Founded in 1970, CM is one of the pioneers in the market of chemical etching and has become established and maintained by steady growth and quality improvement as the market leader in Italy. Practice Areas • Electronic and Electrical Components • Medical • Telecommunications • Automotive • Optical Industry • Fashion Industry • Seals • 0-series and prototypes Product Portfolio • EMC components • SMT STENCIL films • SMT STENCIL complete screen frame • Electrical Connectors • Model • Filter • Design elements And much more! Advantages of the photochemical etching • Production of components of a sheet thickness possible between 0.01mm to 2mm. • It can convert almost all metals processed will. • Complex contours at no extra charge. • The complexity of a component is independent of the process time (production time). This is only by the material thickness influenced (cost neutral even for complex contours). • The components do not have a degree. • There is no distortion due to thermal Action. • No tooling costs and fast Delivery of the components. Product Specific • By half-etched fold lines can flat sheets into three-dimensional components be bent. • The number of holes, holes, or breakthroughs has no influence on the process time. • The body edge differs from a punching / cutting edge. • The etching process is taking place simultaneously on two component pages instead. Flat sheets can be bent by half-etched fold lines to three-dimensional components.

Micromeccanica Srl is a leader company in the realization of Tools, Machinery, Industrial Automatic Equipment, serial parts. To ensure a full support to our clients, we also guarantee different typologies of Services such as Co-Design / CO-Engineering, Prototyping, metrological surveys to get both an inner control of the product and an ad-hoc metrological survey for client, Maintenance, after-sale Service and much more. Our workshop is characterized by different departments with machines tools connected to the 3D CAM Design Department through a direct post-processor. We are fully equipped with 3 and 5 axles multitasking milling, deep drilling, wire and die sinking EPDM, cylindrical and tangential Grinding, Turning, TIG and laser welding, metrological control with dimensional Report at the end of the cycle, tool trial and everything can be needed. All this allow us to reach a high-quality level of products and make possible the finishing precision. We have an Export Sales Department interacting with our worldwide customers in different languages. We are fully specialized in productions addressed to the Automotive field and diversifying our know-how, we easily adapt our skills and knowledge to other industrial fields such as Appliance, Food, Aeronautical and Electricity Industries. Besides having a Quality Management System in accordance with UNI EN ISO 9001:2008 and UNI EN ISO 14001:2004 Rules, the Certification in accordance with the IATF 16949:2016 technical specification is under implementation.

Aluminum is our competence. Metal and contract manufacturing from a single source! The GLEICH Group is a traditional family business from Kaltenkirchen, near Hamburg. Founded in 1980 by Günter and Christel Gleich, the group of companies is now run by Roland Gleich in the second generation. Since the mid-1990s, the core business has been the development, production and worldwide distribution of G.AL® aluminum panels. The brand name G.AL® stands for extremely low-warpage, dimensionally stable and homogeneous aluminum precision and mold boards with consistently good quality. A special manufacturing process allows us to clearly distinguish it from conventional aluminum slabs. Our customers benefit from the resulting unique material properties by significantly reducing production times and component costs. As a unique service package, you will receive from us both the raw material from our own production and the finished drawing part. Travel distances of up to 3,000 x 4,000 are possible here.

Small and big serial production are currently the main focus of work, however Ironicon’s employees also possess several decades of work experience in custom production. Furthermore, the production of tools is also part of our profile. The vast majority of our products are made of aluminum, different types of plastic as well as rustproof and tool steel. Our plans for the future: Aiming for an increase in capacity, developing and enlarging the machine park is an important medium-term goal for Ironicon. As every firm relies on its employees, building up a good, functioning team is among the main long-term objectives. As part of the continuous expansion as well as in order to create a more livable work environment, steps are currently being taken to move in into a bigger, newer and more modern production hall. Ironicon Kft. was founded in 2015. Based on the founder’s national and international experience, the aim was to establish a modern, dynamically growing operation, with European standard and approaches. Only half a year later, a second CNC milling-machine was put into operation as a reaction to the drastic increase in orders. Thanks to repeated orders by regular customers as well the increasing of the customer base, Ironicon experienced constant growth from this point onwards, and was able to extend and modernize its machine park. When acquiring new machines, extraordinary attention is given to high quality in the measurement instruments and devices, for quality within adequate time can only be attained with quality infrastructure. By the third quarter of 2018, the work was already been done by four 3-axis machining centers as well as one 6-axis CNC longitude turner. All our machines can be controlled by Cam System, allowing a faster and more effective working process and eliminating the vast majority of production faults already before production. In December 2018 our firm came to another turning point when we bought two additional machining centers, which brought the total number of 3-axis machines to five. We also acquired our first 5-axis milling machine, which is also capable of manufacturing tolls as well as milling graphite. Punctuality and reliability are key to our success. Getting to know the customers’ needs and delivering the work with high precision and on-time are absolute priorities for our young, dynamic firm.

zepkon - machining production construction is an up-and-coming family-run CNC company in the Düsseldorf area. We offer services in the processing and processing of various materials. These include various stainless steels, non-ferrous metals and plastics. According to your information, samples and drawings, we implement your wishes in individual productions and small or large series productions. We are also happy to respond to your individual special requests. We are a competent and flexible partner for CNC turning and milling, for prototype and fixture construction as well as for medical technology. We attach great importance to the good advice of our customers, the perfect quality of our workpieces and assemblies and the punctuality of our production from a single source.

Werner Hübner GmbH is an SME in northern Germany and has been working as a contract manufacturer on the market since 1975. We have 30 state-of-the-art CNC turning and milling centers, three CNC sawing centers and a fully air-conditioned measuring room with four CNC measuring machines. Our 100 qualified and motivated employees are passionate about new tasks every day. We have a continuous improvement process in order to always be a pioneer in the market. Benefit from extensive know-how from the production of over 27,000 production parts of various designs.

Production of turned and milled parts in the Czech Republic. We deliver inexpensive small and medium series thanks to collective transport. Quality assurance on site. Delivery time: 4-6 weeks Active for the Swiss machine industry for 25 years, high quality standard.

The mechanical engineering company with production on conventional and CNC-controlled machines With a large network of manufacturing partners and suppliers, we have access to an extremely large number of manufacturing methods, as well as processes, CNC machines and thus always free capacities and secure supply chains for your projects, which range from prototypes to series production and we have ours Support projects on schedule. Such a large spectrum allows both large components, as well as the smallest components, to be manufactured with the highest precision. You benefit from individual offers, short delivery times and competitive prices that we pass on to you. We have experience in processing a wide variety of materials. The materials are procured exclusively from qualified suppliers. A constant examination of the latest production technologies and materials enables us to recognize innovations and implement them for our purposes.

Sourcing CNC components

Founded in 1990, Imtec as a leading manufacturer of technical tools, quickly spread to other demanding markets and technologies becoming one of the top companies within mold making industry. It’s labor force is divided in two plants, one for tools up to 3T and the second one for tools up to 25T. In 2017, Imtec established a partnership with IT-MILL which increased even more its capacity with regard to rough milling, deep drillings and mouldbases. Currently, IMTEC provides solutions to its customers in order to ensure the most efficient and durable tool.

Custom manufacturing In view of our machine tools’ opportunity we can ensure the manufacturing of high-precision parts and the processing of small, medium and large workpieces. With our machines, which are suitable for 2D, 2,5D, 3D and 5D cutting, we are able to produce a wide variety of parts. For our technology we use various 3D-models, which are made available in our CAD/CAM-System by our customers, to increase our efficiency. Prototype Besides wage work, we undertake the initial manufacture of individual prototype products, based on model or drawing, machining optimatization including tools and technology. All machined parts are delivered including 3D coordinate measurement certificate. Device manufacturing Machining or measuring of complex parts may require various devices, therefore our engineers strive to develop the simplest yet most efficient devices. We have gained considerable experience through creating our own devices, which we use in single and series production. Our company undertake the design, production and installation of hydraulic and pneumatic devices as well. Serial production Our machine park is also capable of medium and large series production according to market demands. In series production, generally the most important tasks are the optimization of the machining time and the reduction of the non-productive time. During the processing we pay close attention to process safety and the use of the Poka-yoke principle.

P&M tools construction is a young company that was founded in 2018 by two mechanical engineers with many year od experience. The company was founded to offer the market new conceptual solutions, as well as to contribute to the development of the auto and machine industry. In addition, we deal with tool making, modeling and programing. We offer welding of complex assemblies as well as laser cutting of materials.

S&H Feinwerktechnik GmbH & Co. KG is your partner for CNC machining in the areas of 3 and 5 axis milling and turning with over 10 years of experience. Materials such as 1.4462, 1.3964, titanium, 1.4301 - 1.4571, Eladur, plastics are not unknown to us and we process them every day. We set the highest quality standards for our services for our customers in the fields of mechanical engineering, environmental technology, the food industry, pharmaceutical industry or defense industry, which we are constantly deepening through our in-depth expertise and distinctive expertise.

Vág-Tech Ltd. was established in 2004 with the participation of separate Hungarian companies and individuals. Our activities: Manufacture of industrial circular and straight knives, Knife holders, and other cutting tools Custom and small series machine building Renovation of industrial knives, blades, and stickers Maintenance of industrial machines, Manufacturing of machines and special-purpose machines, Contract manufacturing - assembly, Parts manufacturing, tool manufacturing, Heat treatment.

Every client is important to us — whether it's a single component or regular series production. Our team is available for technical inquiries, quotes, consultations, and ideas. We understand how important reliable production is, which is why our goal is to always be there when you need high-quality and fast machining. Precision is the foundation of our work. We process every part with maximum attention, respecting dimensions, tolerances, and the client's technical requirements. We use modern CNC technology and continually invest in team training and process improvement. Communication with us is fast, clear, and to the point. From the first contact to the delivery of finished parts, we strive to make the collaboration simple and efficient, without unnecessary delays. We meet agreed deadlines because we are aware of how important it is for everything to work within the planned timeframe. Whether you need prototype production, small series, or regular manufacturing, CNC Welt is at your service as a reliable and flexible partner. Our vision is long-term cooperation based on trust, quality, and mutual growth.