We are Slovenian engineering company in the field of mechanical engineering.We are present in various sectors of the industry across Europe (Austria, Germany, Switzerland and Netherland) Our advantage is that you as our customer have only one business partner who covers the entire EX-YU market for products. We also guarantee our clients a timely delivery and the quality. of your orders.

With access to a wide range of products and production spectrum in the field of sheet metal processing (perforated sheets, expanded metal mesh, metal mesh, knitted wire mesh, drilled sheets, embossed sheets, demister, metal filters, wire bending parts, ornamental chains), as well as cross-industry knowledge, we are able to optimally to use. We work with qualified partners throughout Germany and parts of Europe, resulting in a fast and professional advice and support is guaranteed.

The company Combinnotec is a research and development, and service company in the field of metal and plastics processing, as well as automation technology. The core competencies are in the design, the mechanical production (milling, turning, cutting, ...), the development of electronics and the creation of suitable software. The team consists of engineers, researchers, and professionals from the relevant sectors and field.

The Evocut GmbH & Co.KG was on 17/03/2011 founded by Andreas Bauer and Stephan Pertl. Through years of experience in CNC production of Andreas Bauer and experience in project business by Stephan Pertl we can already well-known companies among our customers. From the beginning, our focus is on fair and partnership with customers in the foreground. In constant dialogue with our customers, we are guided consistently on their goals and their optimal implementation. Our focus lies equally on quality, delivery and service. Perfection is our drive

Eginoks krom makine sanayi ticaret limited şirketi was founded in 2011. Our goal is to be the first choice company of the clients and, establish long-lasting relationship. Our company carrying out the work diligently serve the turkey.

NEWALU GmbH, headquartered in Delbrück and another location in Altheim, is a company specialized in the heat treatment of aluminum. Since its founding in 1998, NEWALU has established itself as a reliable partner for the automotive industry, mechanical engineering and other industrial sectors. In addition to traditional heat treatment, the company also offers mechanical processing, so that customers receive ready-to-assemble components from a single source — from individual parts to series production in various quantities. NEWALU places particular emphasis on quality, sustainability and innovative manufacturing technologies. This is reflected in important certifications such as IATF 16949, ISO 14001 and ISO 50001. At the same time, the company is pursuing a consistent sustainability strategy: CO₂ emissions are significantly reduced through the use of certified green electricity, photovoltaic systems at the Delbrück site and continuous improvements in energy and environmental management. With continuous investments in modern processing centers and expanding the value chain, NEWALU is positioning itself as an innovative service provider in the area of lightweight aluminum construction. The aim is to offer customers a combination of technological know-how, the highest quality and sustainable production processes. As a medium-sized company with regional roots but supra-regional significance, NEWALU stands for reliability, customer proximity and future-oriented solutions in the area of aluminum production.

Small engineering company with its own design department.

We are the German sales company of the KUAN YI Group. The company was founded in Taiwan in 1989 and today consists of 7 production sites with over 2,000 production machines and 1,200 employees in Asia. We take care of customs clearance and fast delivery within a few days from our production sites.

If >>> not - there's not Following this motto we combine for more than 15 years of production engineering for the complete machining sophisticated machine components productivity and flexibility with the help of horizontal machining center to a economic optimum. Our services include turning, drilling and milling of large, complex hydraulic components, Machine parts for large vehicles and special purpose machines. Our strength lies in the consistent use of the latest manufacturing technologies. Even turning operations of cubic parts whose processing have usually been very labor intensive to conventional lathes was, can with us on one of the BAZ through the use of combined Rotary milling are carried out completely in one setting. The hereby achieved increased process safety and significantly reduced tooling and clamping times are Benefits that we like to pass on to our customers. The connection of the BAZ to a FMS pallet rack system with 60 pallets and a total of 940 tools allows us sufficient machine pallets to store retrievable using appropriate clamping technology. Thus we are able at any time to react flexibly to customer demand absolute, even in small quantities. The slim structure of a small enterprise, 25 committed and qualified employees, a manufacturing engineering Organization at the highest level and of course quality "Made by MUZ" are the benefits that our Know how to use in long-term partnership clients. Interested? We see your inquiry on gladly!

Our company was founded in 1949 by Otto Rimmelspacher in Karlsruhe. We are a universal oriented Lohndreherei and Lohnfräserei. In addition, we are able parts made of steel, stainless steel (V2 and V4) or special materials to weld such as Hastelloy and titanium. Dimensions: Ø20 - Ø300 mm, length up to 3 m, weight up to 200 kg, TIG manual welding, welds with a programmable TIG circumferential seam welding machine. From customers demanded extra-tests of the welds are performed externally. (TÜV, DEKRA, x-ray exams, FE exams, etc.). Furthermore, we can turn, mill and weld plastics. (Heating element sleeve welding or hot air welding). Our metal welders are TÜV - tested according to "EN 287-1141 T". We also process steps according to "DIN EN ISO 15614-1" and "QW-483", and admission AD2000 Module A1 according to Pressure Equipment Directive 97/23/EC. We are also Materialumstemplungsberechtigt for "10204 EN 3.2" At a certification according to "DIN EN ISO 9001:2008" we are currently working, we will complete this certification in the first quarter of 2011. Furthermore, we manufacture eductor and air Reisser according to customer specifications. Eductor are used for pumping water in wells, in low-lying water table. Air Reiser care in domestic water systems for a Constant air cushion in the air pressure tank. These products are designed and manufactured specifically to customer requirements, such as flow rate and head. For more information, please refer to the brochures in our download area. Our 15 employees are almost exclusively skilled metal workers who work independently and know that it comes down to it. On lathes we have conventional center lathes up to a peak height of 250 mm, as well as various CNC lathes Company INDEX to a turning diameter of 300 mm and a tip length of 1500 mm, with and without tailstock, with and without bezel. Our largest center lathe can handle rough-and-work on waves up to a length of 2500 mm and a peak height of 350 mm. Focus of our production is the production of single parts and small to medium series for industrial customers, such as nozzles and diffusers. We also manufacture complete pressure vessel according to customer specification, including flanges according to DIN and ASA. One of our NC lathes can also be operated with hydraulic shuttle chucks for housing to NW 25 or NW 32, the processing can thus be made on 4 sides in one clamping. In NC milling we have a CHIRON machining center with 36 tools and four programmable axes, the fourth axis is set up as a rotary axis. Maximum process paths X = 1600mm, Y = 400mm, Z = 415 mm. In addition, we still have a smaller machining center with 8 tools for drilling and thread to M 12 in steel. Quantity Spectrum 1 to 1,000. A CNC lathe is equipped with an automatically operating portal charging system for chuck parts up to max. Diameter of 120 mm and a maximum weight of 5 kg set.Here we can also realize larger batch sizes. For painting, we have a small spray booth. Can we have a customer, such as galvanized surface coating, not solve yourself, we cooperate with reliable partners.

High precision, complex turning, milling and grinding parts - from 4 mm to 1,800 mm in diameter and up to a length of 2000 mm and finished assemblies, ball screws and motor spindles for the automotive, mechanical engineering, power tools, aerospace, heating and Building Construction. Manufacturing capabilities work Wertach: Turning and Dreh-/Fräsbearbeitung to Ø400mm, length up to 1000mm Milling and Fräs-/Drehbearbeitung cubic and rotationally symmetrical parts to ø1800mm, length up to 1000mm. Feinstbearbeitungstechniken * External grinding part length max 3000mm, 1000mm ø max * Internal grinding part length max 1400mm, 1000mm ø max * Spline grinding ø max 300mm, length up to 800mm * Spline grinding groove width 4mm to 40mm groove width 220mm Ømax * Surface grinding 800x400x500mm * Honing ø4 to Ø72mm Heat treatment: quenching and tempering, case hardening, carbonitriding, vacuum hardening, annealing, Kurzzeitgasnitrieren, carburizing, induction hardening and freezing Deep-hole drilling Clear Deburring Production spectrum ballscrews Diameter 12-125mm Thread length up to 3000mm Gradient of 2.5 mm to 50 mm a and mehrgänging Investment type: 2-or 4-point system Accuracy classes 1-3-5-7-10 ISO 3408 Feritungsverfahren whirled / ground Special threads on request The stiffness

MaS - Solutions offers top-notch surface finishing and industrial painting for small parts, as well as assembly of components. Our expertise in surface refinement and precise assembly processes ensures the highest quality and efficiency. Trust us to deliver your components in perfect condition and on time. We are your reliable choice for industrial solutions.

The company Brero Engineering Srl was established to meet the needs of worldwide customers in the Tochterfimen Brembomatic Srl and Brembotecnica Srl. Thanks to the support of an experienced engineering team, we are able to handle many machining processes as the prime contractor. In addition, thanks to the mutual trust and the solid partnership succeeds Brero competitive to be (in terms of quality, service and price). The company can deliver in every area of complex technologies with the support and cooperation of competent companies.

The company offers services in the field of: Designing and making technological instrumentation for the aviation, automotive, metallurgical, plastics and other industries. The instrumentation includes the execution of, among others: simple and progressive punching dies, dies, milling, turning, boring, etc., galvanic p-dy, gauges: jaw, roller, assembly and others, metallurgical moulds, molds, molds for plastics. We can check the design using injection simulation. Performing various instrumentation according to the entrusted design documentation For several years, we have also been dealing with the processing of details made of aluminum, cast iron and other metal castings. A significant position in the company are welded structures. These are products made according to the construction documentation entrusted by the Ordering Party or based on own designs agreed with the Ordering Party. The most important factor determining the value of the company is the staff. The company employs experienced engineering and technical staff as well as highly qualified production workers. The result is the development of the company: cooperation with both domestic and foreign companies

Small and therefore flexible mechanical engineering manufacturer, strong in small series of various metal items which requires a handwork (equipped with CNC lathes and man-operated milling machines and grinders) and capable of welding aluminium and stainless steel, working with profiles, metal sheets, etc. We love to make precise welded assemblies, especially from aluminum and stainless steel. We also like to make single-purpose machines, including electrical or hydraulic parts, even being developed without drawings. We offer: - turning - milling - welding - other technologies

We are your third man who you can always rely on. CNC woodworking from individual pieces to large series in all dimensions and types.

We produce with the most modern Machines for manufacturing pre-finished turned parts for customers in the automotive, electrical and medical (ISO / TS 16949, ISO 13485, ISO 14001). We process steel, nonferrous metals, aluminum, titanium and plastics, On ... lathes, single spindle, multiple spindle and rotary transfer machines, ... In diameters ranging from 1 to 42mm. For more information see www.hanitec.ch