Since the founding of the KVR GmbH in 1959 we have grown into a company that has specialized in the fields of activity, pneumatics, CNC machining of metals, plastics processing and tool construction, including the construction. Our national and international clients operating in the fields of medical technology, mechanical and plant engineering, automotive industry, chemical industry, construction industry, and in all other areas of industry. The KVR today employs 130 people.

Due to our manufacturing depth we are to take to the production of the complete assembly in a position all the tasks of developing and Konstrukion about the single and series production. Especially in the vacuum and clean room technology grab as many customers back on our experience and manufacturing technology.

ZSO sees itself as a competent supplier and service provider in the metal Zerpanung (turning, milling, grinding) and component assembly. In the area of contract manufacturing (turning, milling, grinding and surface treatment), we offer our services from small series to medium runs with great variety. Here, the annual volumes of 5,000 St. can (with high complexity, Dreh-/Frästeil 50 min processing time) vary up to 1.4 million St. (simple turned part, about 1.5 min. Processing time). The possible workpiece sizes reach the maximum diameter of 400 mm when turning. In radial grooves on the outer contour may occur reduction of the workpiece diameter. During milling, we can work with our machining centers cube sizes up to 1000 mm. We also perform desired by impermeability tests also. The company ZSO GmbH is a company of senata GmbH (www.senata.de), an owner-managed medium-sized companies with a high share of equity.

Specialists in plastics processing. We realize components on customer's design. Turning, milling, shaping, polycarbonated bending, partial assembly of equipment, quality control. All our processing is free from chemical agents and all our components are not contaminated by lubricants.

Since 1988 we have been a recognized workshop for mentally handicapped people who, due to the type and severity of their disability, cannot be employed on the general labor market, or can no longer or not yet be employed again. In our metal processing we have the possibility to produce turned and milled parts on modern CNC lathes and the 3-axis machining center. In addition, we can offer cuts on vertical circular saws and band saws. In addition to metal processing, we have several assembly and packaging groups at our site where parts can be assembled and packaged. compensatory levy According to the Social Security Code (SGB) IX § 71, every company with at least 20 employees is obliged to employ severely disabled people. The employment rate is 5%, so that for every 20 employees, one severely disabled person has to be hired. If this percentage is not reached, a monthly compensatory fee must be paid. An order placed with the St. Josefs-Werkstätten Plaidt helps you to minimize these costs or save them entirely, since you can offset 50% of the work included in our invoice amount against the compensatory levy to be paid. The respective amount is shown separately on the invoice and can therefore be used immediately as a certificate for the integration office.

TINTEC Metal Technology is a certified welding specialist [DIN 3834-2, ISO 9001 iV] for holistic, sophisticated technology and complex welding sheet metal assemblies in steel, stainless steel and aluminum. We specialize in sheet metal fabrication for housing, container & industrial equipment, tanks & tanks, ducts & pipes / flanges and allocations, as a complete assembly with in-house development and design as well as our own production. Production chain with complete sheet metal technology from cutting (laser cutting, punching, shearing, burning) on the deformation (edges, bending, forming, rolling, rounding) with core expertise joining (GMAW, TIG welding, soldering, bonding) to the surface (grinding, brushing, galvanizing, paint / powder). Massive steel construction welding assemblies & to 6 tons with welding qualification according to DIN EN 1090-2 EXC 3 Complete production from one source from prototypes & item to small - medium batch & high quality craftsmanship at a reasonable price level with expert advice and customer care. The company was founded in 2006 with 10 employees is dynamically grown into a SME with now 45 qualified employees - from trainees on skilled workers, foremen and technicians to welding specialist and Welding Engineer. Currently, about 3,000 square meters of production area with stainless steel / mild steel separation and 15 integrated welding workstations for manual and semi-automatic MIG / MAG & TIG welding. (& Conveying equipment Food - - & Beverage, tobacco processing, filling,), air - space, ship, - & yacht building, vehicle and machinery - equipment - Regional and nationwide are demanding customers in the food industry & Apparatus reliably and continuously served.

We are a company for special machine construction and design, plan and produce systems according to customer requirements. One of the fields of application is the building materials industry. Due to this corporate orientation, we can offer a wide range of manufacturing technologies. This makes us a flexible and trustworthy partner for contract work. We see this type of order processing as our "second mainstay".

The Mayenberger Group is a successful growing group of companies with currently 100 employees and 7,000 square meters production at three plants. As one of the leading suppliers of precision turned and milled parts and system assemblies, we are concerned as a team to offer our customers the highest process safety, to offer at an optimal range, on the subject of machining and engineering. From simple nuts and bushings to complex CNC turned parts and CNC machined parts and assemblies, development, and assembly. For you as a customer an ultra-modern machine park with over 120 turning and milling machines, as well as an extensive post-processing department. Products of the Group Mayenberger move the world. Because wherever precision is required, we are also not far away. Whether in high-quality mechanical vehicle components or electronic assemblies. From general engineering to components for the aerospace industry.Also parts for the medical show that our enormously wide range of machining competence gives us the ability to supply virtually all industries with the entire range of its requirements for turning and milling parts. All this in close cooperation with our customers: find your development and design, your purchasing and quality management in our voice solutions and support to the implementation of your requirements.

We are Specializing in the manufacture of turned and milled parts on CNC machines, and offer Single and series production of all machine components. Contract manufacturing on new CNC lathes and CNC machining center. Of repairs of machine components. our products Our specialty is in the rotation, where we can offer good and Cheap work with our lathe including bar loader and driven tools (numbers from 30 to 50,000 pieces). On the CNC machining center, we can also manufacture larger parts. Inlaid work of individual parts and larger numbers (up to 5000 pcs) are possible. Short delivery times are guaranteed. Products and processing Lathe parts CNC - Double spindle of diameter 10 mm to 60 mm length of 150mm Turned on the NC - machine up to diameter 330 mm and length up to 1800 mm Milled parts on the machining center of x-1200 y 650 z 650 mm Material processing There are processed in our steels S355 JRG and all CK35 CK-60 steels and high-quality stainless steels quenched and tempered steels, brass, bronze, aluminum and plastics. Processing methods Our CNC machines allow a complete machining of complex components. our Lieferbrogramm Turned parts, milled parts, bolts, screws, nuts, standard parts, sleeves, distances, plugs, shafts, axles, tubes, bearings, studs, rollers, hubs, washers, bolts, bushings, glass holder for the Fasadenbau clamping elements wedges keyways threaded plates, drive shafts, gears, sprockets, bushings, bronze bushings, caps, collars, collars, dowel pins, studs, Locking screws, special screws ....... Surface treatment Chrome plating Gilding Zinc plating In addition, we offer the following technologies: Inert gas welding Pulses including CNC rotary table rotary welding locksmith

Manufacturer for moulds an dies in single or multi componeten systems

Our range of services: - Plant - Mechanical Engineering - Steel construction - Assembly - Machining - Milling - CNC Milling - 5-axis milling - Turning - Surface grinding - Cylindrical grinding - Hohnen - Welding - Sandblasting - Painting For further work, such as hardening, nitriding or galvanizing we work with long-time partner companies.

We are your specialist for pressing, stamping and deep drawn components for all levels and materials, welding (MAG, TIG, resistance welding), laser machining, nibbling, edging, drilling, tapping, processing all surface finishing, component assemblies.

We are an owner-managed family business, which has been successfully operating in the market for over 40 years. We manufacture prototypes, individual parts or small to medium-sized series for the medical technology, mechanical engineering, electronics, hydraulics, laser technology and aerospace industries. Our employees work to the highest quality standards on state-of-the-art CNC-controlled machining centers.

As M + L Werkzeugmaschinen GmbH, we have our origins in the wholesale trade in machine tools, but over the years we have discovered that due to the increasingly demanded individuality, adaptation work on the machines has become necessary. Based on this, we were allowed to undertake milling and filming in our small production. In addition, we received more and more inquiries from customers about the acquisition of small series and single-part production, which did not want to invest in machinery for the time being. In 2018, we decided to create our own platform under the CNCwerk brand. In addition to the production of milling and turned parts, we also like to offer you clamping solutions in jig construction and supply complete assemblies. Founded in 2004, as an expert in milling and turning technologies, we can offer a very good overall package of modern machinery, effective clamping solutions and tools with a wealth of experience from our employees. Talk to us and see for yourself! http://ml-cncwerk.de/kontakt/

Dear Sir/Madam, We are pleased to extend an invitation for potential collaboration with our company, specializing in turning and milling services. Our capabilities encompass servicing various machines, and among our machinery inventory, we have: - Biglia Smart Turn 1200S - Biglia B56 SM - Nakamura-Tome WT-250II - Index G200 - DMG Twin 65 - Haas VF 4 - Chiron FZ 18 K - Mitutoyo crysta plus M 776 With our available machining capacity, we are able to flexibly respond to your orders while maintaining high-quality standards. We are eager to accommodate your individual requirements, offering competitive prices and delivery schedules. We hope for a fruitful collaboration and are ready for further discussions to finalize the details. Best regards, Steelbo

We deal with custom production on CNC machining centres. We offer our capacities mainly for piece and small batch custom production. We work mainly on the basis of drawings supplied by customers, but we are also able to create drawings ourselves, according to customer requirements. We process a variety of materials, from conventional steel, stainless and tool steel to non-ferrous materials, aluminium alloys, copper, brass, plastics etc.

The workshop composite Work allows people a fulfilling life: a own merit, social contacts and mutual exchange, recognition of one's own performance, meaningful employment. Work strengthens the self-esteem. For people with physical, mental and emotional disabilities In the workshops in Steinhöring, on the court and in Fendsbacher Eglharting around 350 people work with physical or mental disabilities. 2008 Ebersberg another workshop was opened specifically for people with mental illnesses. In all four workshops, our employees care very individual to each employee and each dealing: According to the skill set of each and every professional and trained and supervised. All employees have an employee-like status, are covered by social insurance and receive a wage. The workshops meet high quality standards and are certified according to DIN ISO. Depending on location, different work areas to choose from. The products and services of our workshops. We would be delighted if you want to cooperate with us. We discuss the possibilities of cooperation like with you in a personal conversation. We are open to new ideas. The workshop network offers its private and industrial customers a wide range of products and services: Industrial Manufacturing * Mounting * Completion operations * Packaging Metal processing * Individual wage contracts with modern CNC technology

We are a medium sized company with about 60 employees near Ingolstadt. The company Schermer has now been around 32 years. Our production focus lies in the production of precision parts (accuracy to 0.002 mm) for mechanical engineering, the aerospace industry and the automotive industry. In addition to high-precision individual parts and small series, we also manufacture complete equipment and tools. Our machining depth ranges from conventional turning / milling about the CNC-Drehen/CNC-Fräsen to grinding (flat, indoor and outdoor round, coordinates, etc.), wire EDM and waterjet cutting. Here, our range of materials from steel and stainless steel ranges over the non-ferrous metals, brass, red brass and copper up to the light metal such as aluminum and titanium. As a partner in our small group, we have a separate material including service providers, our sister company MVI (www.mvi-metall.de), which ensure rapid deployment of most raw materials and semi-finished products.Over a network, which we, together with our suppliers, we can offer our customers a wide range of heat treatment processes and surface coatings obtained from a single source. So we are as a supplier specializing in the most common heat treatment methods such as case hardening, nitriding and vacuum hardening. Our program offers among other things a complete machining in the field of manufacturing parts by: lathe parts, pistons, bushings, washers, rings, valve seat, coil, cone, spool, pipes, sleeves, shafts, axles, hubs, spool, spring plate, pin, roller, roller , bolts, screws nozzles, grinding mandrels, sizing, spindle, aperture, mandrels, lid, insert flange. In addition to our machining capabilities, we offer our customers even complete assemblies such as measuring devices, test equipment, gauges and mounting devices.

The BOZ Group specializes For more than 40 years in a "high clean & high end" markets in steel, stainless steel and aluminum semi-finished products from simple to complex assemblies BOZ Group offers the full Automatic Production with versatile robots are used in bending, welding, laser welding and powder coating. Structured Engineering & Industrial Services (from prototype to Zero Defect Production) - Proto Series - Upgrade Series - Zero Defect Series Which service level agreement suits your requirements DETERMINE YOUR RQ-INDEX WITH OUR APP World Class Manufacturing: World Class Manufacuring has as target 100% perfecte logistics as well as a Lean producktionseinrichtung Total productive Maintenance (TPM) and 5S The BOZ Group is among the top 10 in Europe We take the liberty to give you our digital brochure on Anfage have to offer. You can also take a virtual tour through our company do to get yourself a picture of the opportunities available: http://www.onsite360.nl/projecten/bozgroup2009/index.html. You will find that we have a high quality machinery for items for small series as well as the universal robotics for larger batches. We offer the following services such as:  cutting, bending welding, edit to the painting of parts and assemblies  The machining of parts such as milling, turning, grinding to paint individual parts  The combine incl mount of machining parts and supplier parts to complete assemblies. For this we have the most modern facilities such as:  laser cutting machines and Ponsen for stainless steel, steel and aluminum, Stopa including sheet metal storage system with 430 storage locations.  bending machines up to 6 mm thick and 3,000 * 1,500 mm (LxW), manual and robotized.  Trumpf laser welding cells with Kuka robots  MIG / MAG / TIG welding cells.  deburring, Einpressanlagen machining centers (turning, milling, grinding, etc.)  Automated and robotic powder guns-paint, surface treatments.  The latest control and measurement devices succeeding the highest quality standards.  assembly equipment for assemblies and larger components to serial assembly. Our specialty is delivering high-quality as well as aesthetically perfect products, parts, assemblies, to subsystems for various industries. Our JIT delivery reliability is a concept as well as the consequence of the delivered quality, customer satisfaction and the interesting price-quality ratio.