Precision turned parts and Fräsbauteilelieferant, job shop almost all materials including surface treatment process and heat treatment processes. We manufacture mechanical assemblies, devices and machines with very large potential for value creation, Problem solving as a "comprehensive package".

Metal fabrication company based in Bucharest, Romania with 30 years of experience in this field. With Lloyd's Register quality assurance system and multiple CMM's and length machine, the main purpose of our work is client satisfaction. Try us or, if opportunity comes along, visit us! Regards

Company specializes in: - Cylindrical grinding inter and exter - The cutting (brass piece) - Turning / milling Company Specialized in: - Cylindrical grinding inter and exter - The cutting (brass piece) - Turning / milling

The Friedrich engineering company was founded in 1994 by Manfred Friedrich. We would like to introduce ourselves as an innovative and full service company in the field of precision engineering and special engineering. With modern machinery (CNC and conventional) and qualified staff, we are able to produce high-volume, small batch, single parts and assembly of modules and special machines according to customer requirements. As a supplier, we are in daily to new requirements and tasks.

The company “Hafelder Kunststoffwerk” was founded in 1945 by Mr. Ing. Zittmayr in Hafeld (Upper Austria). Back then, only plastic injection machines were used (source drinking basin production). In 1990, the company was acquired by Friedrich Gruber and continued to operate as a plastic injection moulding plant. Later, the first spare parts for spring basins were produced in-house. (First machine - Emco 342S). More and more lathes were gradually purchased, including two machining centers. From 2000, the company moved to the new premises of a former office furniture factory. Currently, around 100,000 turned parts are manufactured every month from a wide variety of materials such as brass, stainless steel, copper, cast iron, plastic, titanium, steel, etc. In 2002, another turning shop (Ing. Arzberger in Trumau), including machines and customers, was taken over. As a result, our company was almost doubled in size and renamed Hafelder Präzisionteile GmbH. In recent years, production has increasingly switched to special, turned and milled parts and mainly parts have been manufactured which must meet high requirements or have very low tolerances in the thousandths range.

The Spaleck GmbH & Co. KG is a medium-sized, coming from the engineering company, founded in 1869, located in Bocholt. Our company is family-run by the fourth generation. We currently employ approximately 135 employees at the site Bocholt and approximately 12 employees at the site Greiz in Thuringia. At these sites, we have a turnover of € 18 million. Contract manufacturing has increasingly gained in importance in recent years and this factor is well over 50% of revenue. In particular, the close cooperation with various gear manufacturers has helped us in recent years to considerable growth. For several years we have been certified according to DIN ISO 9001. Modern machinery, considerable investment and motivated and qualified employees meet these requirements. We currently focus both in the field of mechanical and sheet metal technology to the production of small to medium-sized workpieces. A close cooperation with various customers enables us to invest in state of the art machining centers for large parts and thus a significant development. We have recently made a decision to invest in three MAZAK turning-milling centers that take us from January 2010 in the position to manufacture large parts in high quality. These machines can process workpieces up to 2300 mm in diameter and up to 7000 kg deadweight and also perform milling operations with large distances. There are 3 type aircraft MAZAK Integrex e-1850 V. supplemented these machines by a 3D measuring machine.

Demag Ergotech GmbH manufactures injection molding of well-known brand

Welcome to ThyssenKrupp EGM! ThyssenKrupp EGM is one of the leading companies operating worldwide in the powertrain test technology field. Due to our innovative, high-quality product and service portfolio we have been a strong and reliable partner for the automotive industry for more than 25 years. We would also be happy to personally answer you questions and are looking forward to your query.

Founded in 2005, A. Moor Precision Engineering is a medium sized company based in Ostersander. Our main expertise lies in the areas of milling, turning, drilling. We manufacture individual parts and series for machinery and plant engineering, the automotive sector, the commercial vehicle industry and parts for Hydraulikkompomnenten. Our highly qualified personnel made to the latest CNC machines. Are processed technically sophisticated components that are coated or finished as required for reliable firms. On a production area of about 750 m² we work with a highly modern machinery to ensure our customers the highest precision can. Since its founding in 2005, our young and upcoming company has developed into a competent and reliable partner for many production tasks.

The company Maschinenbau GmbH Ullrich has a host of experience in general engineering, jigs and fixtures in metal processing. The company was founded in 1978 and comprises a strain of 21 employees. The company's own production site encloses two business units an area of about 2500 m². Highly qualified personnel, as well as versatile manufacturing know-how and family collaboration have led us to a recognized contract manufacturing operation in which not least is actively involved in the management of the development of the customer product. Even short-term changes to the products our customers are made possible by the great flexibility. We are able to cover the following areas: Machinery, equipment and steel construction, welded structures, sheet metal, stainless steel, plastic, Gußverarbeitung and boring mill, milling, Turning, grinding and honing. We also offer production of individual parts, assemblies, equipment, and complete assemblies for the General-as the special engineering. Also includes repairs and overhauls of machinery components to our product range Also, the tool and die maker is in us an appropriate point of contact for Machining. The satisfaction of our customers is our goal. Try it once, and compare our quality and price with other suppliers in this sector, or simply indulge in a bid to create your product. Manufacturing capacity index: Turning CNC and conventional to peak height 350 mmup peak width 2000 mm CNC milling, with automatically swiveling universal milling and tool changer and CNC rotary table to x = 6300 y = 1500 mmup mmup z = 2200 mm Boring Machines CNC to x = 2100 y = 1800 mmup mmup z = 1500 mm Surface grinding to x = 2000 y = 760 mmup mmup z = 600 mm Cylindrical grinding to peak height 260 mmup peak width 2000 mm Drilling honing <

Our company specializes in tools for solid cold forming. We mainly supply screws manufacturers, furniture and automotive industries with CASE tools of hard metal. An overview of our facilities. Flat grind ·, clamping 300 x 600 Outside round grinding · D 290 x 500 Inside round grind ·, D 220 x 120 Depth unilaterally Milling ·, X 200, Y 390 way · CNC turning, D 190 x 500 · Erode, 2 D, X 290, Y 360 clamping Profile grind ·, D 100 x 150 · Hardening furnace up to 1200 ° C · Manual workstations for polishing surfaces Furthermore, for years we work with reliable partners in the field - Die sinking - Coating (CVD, PVD) - Special hardening process together

CNC Bearbetung turning, milling, drilling. Turning 6.bis 60.mm of rod on multiple CNC lathes with driven tools and Fanuc controls. Lathe parts up 250.mm around and 500.mm long on CNC lathes. Milling to 600. x 300. x 300.mm on CNC machining center. Several conventional lathes. Centerless grinding round to 50.mm.

JHM CONCEPT is specialized in engineering, design, production and installation of special purpose jigs and fixtures. OUR DEPARTMENT: 1 engineering office + 1 machining company A single contact your you with capabilities of two companies: the enginnering office JHM CONCEPT and its machining expert partner SODERTAL. For your needs, we develop, produce, adjust, qualify and deliver specific tools or parts. Our team: 6 engineers and 5 technicians are at your disposal to answer your problems. Our strengths : - Development of specific solutions - Prototyping - Machining - Cutting - Manufacturing Our philosophy: Provide French quality products at the best prices!

Edit Description Punch Powertrain is an international player, with a strong presence in Europe and China. In addition to the headquarter in Sint-Truiden, Belgium, the company runs 6 more R&D centers, located in Germany (2), France (1), the Netherlands (1) and China (1), allowing close cooperation with the customer and short communication lines. Economies of scale are achieved by concentrating production in 3 facilities in Belgium and China. Since 2013 Punch Powertrain is growing rapidly thanks to: - a continuous focus on quality improvement - a constant focus on costs - innovations in green powertrain technologies - highly-motivated and valued employees Our significant growth is driven by a strong focus on product innovation, with about 30% of all employees working in R&D. Our innovation focus has enabled us to develop revolutionary DCT concepts, which lead to new future business in new markets, such as Europe and India. Following the same rationale, Punch Powertrain established a strong position in the field of New Energy Vehicles, with the acquisition of Inverter specialist APOJEE in France and a number of Joint Ventures

SIM Gdynia was founded in 1978 and has been a family company since then. We specialise in machining, in CNC technology and in the production of the highest quality machining components for all branches of industry. Initially, our company is a good example of the fulfillment of “The American Dream” and it shows it is possible in any circumstances. Today, after over 35 years, we are a modern enterprise proud to represent the highest level of technology, service organisation and responsibility.Today SIM Gdynia means: a team of approximately 170 employees, including 25 engineers and a Quality Department of 10, over 50 modern CNC machines and measuring devices including brand new and fully robotised ones of the world leading brands (Makinol, Mori Seiki, Kitamura, Enshu, Okuma, Chiron, Star, Fanuc, Miyano, Doosan, Mitutoyo),machining of alloys (also stainless steel, superduplex) and plastics according to the clients` requirements, samples and drawings, our own production of worm gear, the CAD/CAM/CAE computer aided design and manufacturing system, the export of almost 70% of total production to world class companies and leading corporations in Western Europe, North and South America and Far East, active Quality Policy, ISO 9001:2008, other certificates and prizes.

Costruzioni Meccaniche Alto Milanese S.r.l. provides a comprehensive subcontract machining service incorporating CNC and conventional production technologies. With our heritage of machine tool building, we serve the agricultural, industrial, and general engineering sectors. Main experience and specialization of Costruzioni Meccaniche Alto Milanese S.r.l. is the gears manufacturing and we offer an accurate production according to customers' drawings. Our services include processes such as raw material supply, heat treatment, surface finishing and assembly. Mr. Giovanni Sommaruga founded Costruzioni Meccaniche Alto Milanese S.r.l. as an independent company in 1955 in Cassano Magnago. Over 50 years of experience has made Costruzioni Meccaniche Alto Milanese S.r.l a reality, always willing to find the most appropriate solution to satisfy the request of its customers. So successful has the ability to engineer solutions become, that our business is based on a very loyal, technically demanding customer base that has created a high ratio of repeat business. We are dedicated to continuous improvement, assure 100% customer satisfaction, and look forward to loyal collaboration with our customers, both on the national and international market, to solve their most demanding needs. On our side we bring the technical know-how, reliability and discretion that have proved successful since we have been established. Committed to the highest levels of quality, we are certified and registered since 1998 to SN EN ISO 9002:1994 and from 2012 to UNI EN ISO 9001:2008.

Manufacturing Our employees are provided with the latest means of production. This involves modern CNC-controlled lathes as well as multi-spindle, long-turning and turret automatic lathes. Further processing such as remilling, super-finish turning, drilling, milling, thread cutting, thread rolling, external cylindrical grinding, burnishing, bending, pressing and broaching is done with special machines and rotary transfer machines. Our core capabilities Production of precision turned parts on single and multi-spindle automats, Short turned parts ø 4 - 42mm, Long turned parts ø 2.5 - 32mm, Large and medium series, Complex parts on CNC automatic lathes with one setting. Capabilities for further processing (e.g. rotary transfer machines with automatic feeding, cylindrical surface grinders, broaching machines and presses etc.), Construction of jigs and fixtures, Subassemblies, Prototyping, 100%-verification with opto-electronic measuring machine Manufacturing spectrum Turned parts made of machining steel, stainless steel, Turned parts made of brass, Turned parts made of aluminium, Subassemblies (e.g. turned parts + plastic parts + O-ring seals + floating bushings ), Thermal treatment and surface treatment through co-operation with hardenings and electroplatings

For more than 60 years, we finished at the site in Altbach tool holders and customized designed products. Our production is oriented so that we are totally flexible in terms of delivery ans so we can offer at reasonable prices. Our production program includes the following tools cones HSK DIN69893 Form "A" through "F" in sizes up HSK25 HSK160 DIN69871 form "A" and "B", in sizes up to SK25 to SK60 MAS-403-BT form "A" and "B", in sizes up to BT30 to BT50 DIN2080, in sizes up to SK30 to SK60 DIN228 Form "A" and "B", in sizes morsetaper MK1 to MK6 and Metric Taper tool holders. For this tool taper we maintain adequate storage. The cone tool can be combined with the following tool systems. Shrink fit in various lengths and finely balanced, with or without set screws holes Chuck "Weldon" according DIN1835 "B" Chuck "System Whistle Notch" according DIN1835 "E" Collet Chuck System "Ortlieb" according DIN6388 Collet Chuck System "ER" according DIN6499 Morse Taper sleeves for DIN228 Morse Taper "A" and "B" Arbors in combination with length and transverse groove Shell Mill Arbors Arbors in long version e.g. for Hobbing Machine Grinding arbors for different manufacturers Checking bar with testcertificate NC-Drill Chuck with right and left rotation Tool holders for System ABS, HSK according DIN69893, and much other Tapers, Reductions and extensions of various systems such as tool HSK, ABS, etc. Quick shots and quick change chuck We also offer a comprehensive program of accessories for the offered tool systems: This particularly spacer for arbors according DIN2084 "A" / "B" / "C" / "D" / "E" in sizes up Inner ø8 to Innerø100 in thicknesses from 0.03 mm to 100mm In the field of modular tools, we produce tool holders and tool modules with ABS and ABS-N interface in sizes up from ABS25 to ABS100. Generally, we produce precision parts complete finished after drawing beginning at 1 piece. A further area of our production includes the manufacture of rings and washers according to customer's request in small quantities. Here, we can manufacture spacers from a thickness of 0.03 mm to 1.00 mm and an outer diameter up to 140mm. Holes or grooves are also easy to implement. From a thickness of 1mm, we also produce customized rings with grooves and holes, non hardened, hardened, finished plane-parallel and inner and outer grinding. These rings and disks are produced in quantities beginning 30 pieces. Our production also deals with the manufacture and sale of recordings and adaptation systems or drill Drill chuck adapters for the power tool industry. Following systems and interfaces can be combined SDS-max and Hilti TE72-92 SDS-top SDS-plus and Hilti Te12-22 DH38YB Small or large spline Large or small triangular 19mm or 13mm hex Bitholder and spec. Recordings for Wacker, Makita, SPIT, etc. Please send us your inquiries