Since 1860 is Ammann AG in Switzerland for a high quality and efficient processing of steel through to the light metal. Ammann AG offers machining forging certified welding and Shot peening. For this specific know-how mix, the development of competencies, which we make available to our customers arise. CNC MILLING Ammann AG is your reliable partner for CNC machining - especially when it comes to parts with high quality standards. We produce pre-finished components from solid or from forged or cast blank. We machine with our Machining Parts, which have up to 1.2 cubic meters per side and are up to 1000 kg. CNC machining with high cutting volume allows Ammann AG a very economical and precise machining. We are medium-sized and adapted to produce larger batches with the highest possible quality. CNC TURNING When CNC turning "off the shelf" parts are machined with a maximum diameter of 65 mm and a maximum length of 360 mm. FORGING Ammann AG is a traditional industrial company that produces high-quality in the weight range of 0.1 to 80 kg drop forgings. The company specializes in parts that are later exposed to a particularly heavy burden. There are specific components manufactured for international companies in the machinery and plant in all steel grades up to the light metal. CERTIFIED WELDING For many years, operates Ammann AG welding at the highest level. For the development and manufacture of welded structures, which are later exposed to heavy loads, or must meet high safety standards, Ammann AG is your experienced partner. The company is certified according to SIA 263/1 and EN 3834-2 H2. Welding according to DIN EN 15085-2 (CL1) Rounds off the portfolio in the welding of components for rail transport. After welding, the components are often not additionally treated mechanically.The combination of these methods allows Ammann AG a very versatile machining of components and assemblies CONSOLIDATION RAYS The Ammann AG has in the directed solidification of various components of practice-proven know-how and experience. Thus, developers and producers leave in motor racing at Ammann AG, to solidify heavy-duty transmission gears targeted. The parts are installed in Formula 1 and other motor sports car. Ammann AG may advise its customers very comprehensive, if metal parts are to be optimized in weight and durability. Our experts look forward to special challenges that arise in highly stressed components. The customer satisfaction and long-term customer success is our prime focus. Benefit from our experience in the development and manufacturing technology to your advantage! The Ammann AG supports its customers in product development, project management and procurement.

he CNC production Glöckler KG, based in Trossingen, has developed into an experienced specialist for machining technology and CNC production for more than 29 years. The range of services includes the development and production of high-quality and economical prototypes, samples, molds, tools, assemblies, series and devices. We offer our customers, who come from all branches of industry as a reliable and high-performance partner, all associated services from a single source. This includes professional construction based on the latest 3D CAD / CAM technology and perfect finishing with competent partners. Get an idea of our capabilities and challenge us. We develop and manufacture tailor-made solutions for you!

We finished with an emphasis milling 3-5achsig, 120x tool changer, with Roboterbeladung.Einzelteile to medium series 30000 parts pa, complete machining incl hardening, grinding, plated surfaces. Focus is Aluzerspanung all alloys with all Oberflächen.Hoher control effort in parts 100%, otherwise as desired measurement protocols via 3-D measuring machine with Meßtasterwechsler. Programs on the machine and 2 programming stations with Solid Cam / Solid Works.Kunden from automotive to medical, locations BW, Bavaria, Switzerland.

Wagner Zerspanungstechnik GmbH & Co KG and its participating companies produce iron and non-ferrous metals for various industrial sectors. Main product groups are: - Milled and turned parts - Aluminum die castings - Aluminum extrusion profiles - Stamped and extruded parts It can be used for small batches, prototypes and large series.

With a production site covering an area of 9.000 m2 FERROCAM has been supplying solutions for steel industry for handling and lifting for over 60 years, as well as offering customers CNC turning and milling solutions. Our experience has allowed us to meet a wide range of requirements by working on high performance CNC machines as well as machine centers. Our qualified engineering department checks all operations guaranteeing the best result of all the processes.

Our Company's History and Development Tometh KFT was founded in 1997 as the successor to a sole proprietorship that had been operating for five years, with the aim of providing high-tech solutions for the engineering industry, prioritizing customer needs. Over the years, we have continuously expanded our workforce and machine park. Today, we operate more than 20 modern, computer-controlled production equipment, and our team has grown to 52 employees. We have been operating our ISO 9001 quality management system since 2002, which is now fully integrated into our in-house developed production management system, supporting quality-focused manufacturing. In addition, in 2019, we implemented the ISO 14001:2015 environmental management system, reaffirming our commitment to sustainability and environmental responsibility. We utilize a modern enterprise management and MES system in production, and we have been operating paperlessly for nearly 12 years, with a strong emphasis on digital systems for data collection and statistical analysis. Our goal is to achieve robotic machine servicing for medium-batch production (1-500 units) and to implement robotic shop floor logistics. We already have operational divisions in this area, supporting efficient and innovative production. Through technological developments, we have also established the conditions for manufacturing and assembling assembled units. Currently, we produce 50-100 different assembled units and over 1,000 types of parts, regularly serving about 20 clients. In recent years, small-batch assembled unit production has opened up a new, strategic field for us. We use our CAD-CAM systems not only to support our own manufacturing processes but also to provide design and prototype manufacturing services for our clients. Our goal is to offer long-term, value-added partnerships to our customers through our modern technological expertise, contributing to their competitiveness and success.

We produce turned and milled parts in single and serial production. Highest quality and manufacturing precision is our top priority. We have specialized since our inception in 2002 to the production of parts for the robot and the press manufacture. Through our highly qualified staff and modern machinery, it is possible to take us to accommodate special requests our customers.

we offer machining of all types of metals and plastics on the 3-axis Deckel Maho machining center, on which we are able to produce products up to 1100x550x400 mm with an accuracy of +-0.01 mm. We offer services from the purchase of material, cutting, machining to various surface treatments that we can provide.

Do you have components with a length or diameter of 1200 millimeters and a mass of three tons? No problem, we process workpieces up to 1000 x 1200 x 800 millimeters (width x height or diameter x depth) and a mass of up to three thousand kilograms on our CNC-controlled manufacturing machines. Our high-quality machinery allows complex components to be manufactured with the highest precision, even with unusual dimensions. It doesn't matter whether they are rotationally symmetrical turned parts or cubic workpieces. In both cases, the highest level of reproducibility and accuracy is guaranteed. For machining, we rely on ultra-modern and sturdy machining centers made in Germany; experts will be familiar with the Alzmetall brand. The outstanding features of five-axis simultaneous operation make these manufacturing centers guarantee unmistakable quality and speed. In doing so, we not only machine simple structural steels, but also materials that are sometimes feared because they are difficult to process. The following is a selection of the materials we process General structural steels chromium-nickel steels duplex steels Highly heat-resistant and high-alloyed steels High-strength aluminum Inconel (600,625,718,601.725, X-750) All plastics Titanium (pure titanium, Ti6Al4V, Ti6Al4V ELI, Ti6Al7Nb, Ti3Al2.5V)

SMB Präzisionsteile, based in Albstadt, Germany, is an owner-operated manufacturing company specializing in precise CNC machining of metal and plastic components. We offer tailored solutions for single parts, small series, and prototypes – with a strong focus on quality, punctuality, and flexibility. Our modern machine park features advanced 3-axis CNC milling machines, enabling precise and cost-efficient machining – even for complex geometries. With extensive experience and fast decision-making processes, we can respond quickly to customer requirements and implement individual needs efficiently. Core Competencies: 3-axis CNC milling Small series and single-part production Prototype machining Assembly of subcomponents and finishing Wide range of materials: aluminum, stainless steel, tool steel, technical plastics Industries Served: Automation, mechanical engineering, fixture construction, research & development, and non-certified medical applications. SMB Präzisionsteile stands for quality, reliability, and long-term partnerships – from the initial idea to the finished part.

Fávecartec, lda's main objective is to understand the needs customers, providing services that meet their needs needs. For this, we have a highly qualified team competent, as well as the latest technological methods. We are a company providing services in the metallomechanical area, which aims to be recognized for its solidity and competence, both in national and international markets, as well as for all our customers and employees. Our desire to grow makes us challenge ourselves with enthusiasm and dedication to each project we propose. -CNC programming and machining 2.3 and 5 axis programming. -Erosion services. - Three-dimensional modeling. - Welding (MIG MAG / TIG). -Laser cutting. - Production, realization and adjustment of molds. -3D printing.

Kohler precision technology is a dynamic and modern medium-sized enterprise which specializes in the supply sector to small and medium-sized batches. True to our corporate goal have terms such as customer orientation, flexibility, punctuality, excellent price-performance ratio, service and quality not only tag character, but are living and practicing philosophy and have the highest priority. Manufacture of precision parts made of stainless steel, titanium and nickel alloys (turned parts, milled parts, assemblies) Materials: - Stainless VA, V2A, V4A (1.4571, 1.4404, 1.4301, 1.4305, 1.4539, 1.4529, 1.4462, and other stainless steel grades) - Titanium and titanium alloys (3.7035, 3.7165, 3.7235, and other alloys) - Nickel-based alloys such as eg Hastelloy, Monel, Inconel, ... (2.4602, 2.4610, 2.4819, 2.4360 ...) Processing options: - CNC turning of the rod (complete machining possible) up to ø 42 mm - CNC turning in the diet (complete machining possible) up to ø 250 mm - CNC machining blank (investment casting, forging,...) - CNC milling 5-axis machining centers - Sawing up to ø 260 mm - Aqueous cleaning - Marking (stamping, etching, laser marking, dot peen, ....) - Electroplating Electropolishing, chrome plating, ... - Heat treatment: on request - Assembly production including assembly Numbers: 5-5000 Tags: Stainless steel machining, titanium machining, Hastelloybearbeitung, stainless steel turned parts, titanium machining parts, Hastelloydrehteile

A. Brans Metaalbewerking is a reliable supplier for a long term relationship and established for small and large quantities of high precision mechanical parts, made of various metals and alloys. Our main customers are since many years active in designing and assembling their products in five main sectors: • Medical equipment • Semiconductor industry • Food industry • Machines and - industry equipment • Personal care equipment Our customers appreciate our company, because we realise reliable deliveries with a high quality performance and are working with a high level of flexibility. And last but not leased against fair prices. We are processing with the most advanced CNC machines and therefore we are able to supply with short delivery times. Most of CNC machines are equipped with an automatic bar loading system or a robot loading system. Data of your digital drawings can be transferred the into our CAD-CAM equipment. We convert your data to NC-codes for programming our CNC Machines to achieve a higher level of efficiency and avoiding failures.

1) Core competence: Tool and mold for injection molding and die casting (automotive and non-automotive). 2) Tool order: There are 5 Injectionmachines for tool declines in house available (50to - 3200to). 3) wage labor: Milling: New Bettfräsmachine with 8m travel, 100to table load and 30to round table load for wage labor. Die sinking: 8Maschinen (Ingersoll and Makino) are also available for custom work available. 4) General: We are a family business that operates on two international market since 1979. We supply our customers worldwide with high guality spray and Druckgußwerkzeugen. Our high-performance tools zeichenen by short injection cycles. Total employed the Haidlmair Group about 500Mitarbeiter in 7Firmen with a total turnover of approximately Eur 60mio. The Company: HAIDLMAIR GmbH in Austria HAIDLMAIR North America in Toronto EMO Extrusion Molding GmbH in Austria HSC GmbH, mold in Austria HTM Kft, mold in Hungary HSCM, service center in Germany HAIDLMAIR U.S. service centers in the United States

Loest Präzisionsmechanik GmbH is a traditional supplier company. The focus is on CNC turning and milling. But the assembly of fine mechanical assemblies is also standard for the company. The company Loest is 111 years old this year and is a pure family business in the 4th Generation. The company has been certified to DIN 9001 for many years.

We are a small company that produces individual parts and small series according to customer drawings. Our machine park includes a Weiler CNC lathe, like a Chiron milling machine. Both machines have a tool capacity of 12 tools. We can produce turned parts up to Ø42mm and milled parts of 300x250x150mm. Customer service and quality are very important to us. We have short delivery times and a high level of quality awareness. We look forward to your inquiries.

We manufacture CNC-controlled portal milling machines MZP. We manufacture machines for various industries based on unique customer needs. We have extensive experience in the complete production of mining machines, flame cutting machines, custom production lines, and many other specialized equipment. Our machining division consists of more than 25 milling machines, lathes, and grinding machines, specializing in the machining of medium to large-sized workpieces. Our references include major Western European multinational companies.