Subcontracting work: precise, flexible, reliable - cheap. FUCO-HEG offers the complete range from the development and construction to production. A further benefit is its own electronics department. From the circuit diagram to programming, cabling, drive panel construction, assembly, etc. Production depth which is convincing. What counts is the fastest and most cost-effective way to achieve the results. We offer engineering and production services from one provider: * Production of parts according to stipulations * Production and assembly, incl. electrical and control engineering * Complete solutions - development, construction, production of machines and systems 3-D construction: consultancy, optimisation and an independent construction solution (see 3-D construction). Mechanical processing: Modern production equipment using CNC machines, processing centres and conventional machines. Welding: welding specialist with major verification of suitability according to DIN 18 800-7, section 6.2 with extension according to DIN 15 018-2, crane. In our locksmiths shop/welding shop we produce steel constructions up to a unit weight of 10 t. We have extensive experience in the field of sheet metal processing, incl. welding technology, of VA and NE-sheet metal. FUCO-HEG Machine pool and services The listed machines are designed for serial production. * Boring mill * Milling machines * Conventional lathes * High-performance radial drills * Surface grinding machine * CNC lathe, slant bed type * CNC bed type milling machine * Horizontal drills and milling machine Other services: priming --- lacquering --- processing of stainless steel and NE metals electronics department --- service, maintenance, repair Car pool Transport and customer service vehicles

The company Metal Forster GmbH & Co. KG, based in 95666 Mitterteich, is a company with a long tradition. The first written reference is from the year 1735. In 1974 the company was young by William Forster. inherited from his father and has since expanded. In 2002 the company was transferred to the current legal form. Since that time, Mr. Christian Forster is co-owner and managing director. Currently about 90 people are employed in our company, which have an annual turnover of approximately EUR 11.5 million. Principle of our actions are quality and punctuality. The satisfaction of our clients is always at the center. Our company is divided into two divisions: 1 Metal (Fassadentechnik) This division is concerned with the design, manufacture and installation of windows, doors and facades in steel and aluminum for objects throughout the country and in neighboring countries.In addition, we also also specialized in the production of fire and smoke protection elements in steel and aluminum. 2 Sheet metal processing (laser and water jet cutting / folding) In this department, sheet metal design for renowned customers are, among others, made of the metal and engineering industry. Due to the high degree of automation, it is possible to create our economic offers in all batch sizes (from single part to mass production). Through the use of waterjet technology also enables us to utilize the standard steel materials, stainless steel and aluminum provide blanks of all conceivable materials such as stone, glass, ceramics, wood, insulation materials. Sheet metal working / performance spectrum: Fully automated laser cutting in sheet size 3,000 x 1,500 mm: - Steel up to 25mm - Stainless steel up to 15mm - Aluminium up to 10mm Water jet cutting in bars 4000 x 2,000 mm: - Almost all materials up to 90mm Shearing in the format 4000 x 5mm CNC bending with 4-axis back gauge, bending length 4000mm, press force 200 t Machining: drilling and countersinking Welding: MIG-/MAG-/WIG-Handschweißen Logistics: Car truck or freight forwarding

Our company was founded by the two managing partners Wolfram Streubel and Andreas Seifert on 10.02.1997. Our main business is the production pipeline and plant construction in the chemical and paper industries. So we assign pipework systems from steel, stainless steel, titanium and plastics. We are in possession of the "manufacturer's qualification Class C" according to DIN 18800 Part 7 of the materials steel and stainless steel as well as certification as a specialized company according to §19 I WHG. Our operational quality assurance is achieved by compliance with the requirements of the Pressure Equipment Directive 97/23 / EC. In the field of labor protection technology, our company SCC certified. Another business area is mechanical engineering, in particular the conveyor system. These include, for example, screw conveyors, elevators, bunkers, silos and various special sheet metal parts. We guarantee a professional manufacturing, assembly and disassembly of the equipment. Check with local gas and water utilities we are listed as a contract installation company. Welded joints of steel, stainless steel and titanium, we produce by the TIG welding process, E, MAG manual and mechanized TIG -Orbitalverfahren for pipes up to 115mm diameter. The technological preparation and final inspection are met through welding supervisor or the authorized person. PED performed.

"The laser cutting specialists of small to large thicknesses and formats"

Decades of experience in steel construction, pipeline construction, crane engineering, metalworking and sheet metal and profile processing have made us the ideal partner and system provider for our customers when it comes to implementing projects in the steel, stainless steel and aluminum sectors. The predecessor companies of the CONIX-STEEL-GROUP®, whose knowledge and experience we are now combining in a powerful organization, date back to 1885. The individual requirements of our customers, which usually involve the production of a sheet metal part or a welded assembly, have always been the focus of our work. In short: Today, as a general contractor from our headquarters in the heart of Stuttgart and from a single source with our international CONIX STEEL NETWORK of manufacturing and service partners, we implement your projects in a targeted, efficient and effective manner at the location of your choice and create the products you require for you

Since 1889 we produce as a family in Hilden, in the heart of the Rhineland. We mainly supply to the automotive industry and recognize the challenge of changing markets. "Those who do not move with the times, moving with the times", and that's why we secure for decades our high product quality by continually investing in serious murder machinery and the expertise of our staff. Together from the start: We are happy to advise during the development phase to the production-oriented design with forged parts. Prototypes, small series, small series tools to series production. For this purpose, you can use our seasoned practitioners and technicians to the side in order to your individual requirements to take. With our specialized metal forming CAD system, we can handle all common formats. Modern punching and forming machines allow precise and appropriate customer implementation. With a press force up to 5000 KN and a table length up to 2.5 m we process with Progressive and transfer dies, all types of sheet metal (Steel, stainless steel and non-ferrous metal) up to a max. Thickness of 10 mm and a width up to 600 mm. The average part weight ranges from a few grams up to about 1 kg. The pieces have a dimension of an A4 sheet in the level up to the shoe box size in the room. After the forming process are a function of product and quantities fully automatic welding centers and robotic systems available. All common methods such as MIG / MAG welding are, Resistance welding, soldering and so on. We are happy to take final completion works for you. Even with surface coatings, we are happy to advise you in the selection of functionally appropriate and cost-effective methods. We are certified to TS 16949 and supply our automotive customers with single-digit ppm -. Rates.

Your creative partner in sheet metal processing! The company Heinrich Horstmann GmbH & Co. KG manufactures for more than 15 years for the industry and the craft. Products: • cabins • Folded profiles • Laser Cutting • Housing for gauges • Complete housing • machine covers • covering and protective hoods • Housing for medical devices • Flashings • Laser parts • Modules • Building Our customers include: • Electronics Company • Computer Manufacturers • Stamping and toolmakers • Machine and plant engineering • suppliers to the automotive industry • Suppliers of the shipbuilding industry • metal processors of different industries • craft enterprises in various sectors Upon request we offer the complete assembly manufacturing including surface treatment such as the galvanic zinc plating and wet or powder coating. In addition, the assembly completed and assembled be.

You need to reduce costs - compare prices - we can help you The Junghans is a modern company in the field of sheet metal processing. Our specialty is PRIMARILY in laser cutting and bending technology. In our machine park you will find the technologies that allow you to purchase your desired parts cost in the shortest production time. * Edit structural steels up to 40 mm sheet thickness * Edit stainless steels up to 25 mm sheet thickness * Edit aluminum to sheet thickness 15 mm * High-speed cutting * Oxide-free cutting Everything from one source - this is a key factor, which more and more customers appreciate. Our range of services covers the entire production variety, which is of the most modern sheet metal processing, welding, construction, engineering, and surface treatment for both powder coating and wet painting available. TRY U.S. - OR HAVE SOMETHING TO LOSE?

We are a company with extensive experience in machining and the fixture. The services range from the special design of parts, assemblies production to production parts. Our qualified team of 6 employees put your wishes with the latest CNC technology to accurately and on time. Even with complex requirements, we realize for you always an individual and customized solution.

Presentation of the company The name of the company: ZEUS Exhausts Limited Trade and Service Company Short name of the company: ZEUS Exhausts GmbH. Place of the company: 8800 Nagykanizsa, Sörgyár Street 3808. hrsz. Location of the company: 8800 Nagykanizsa, Sörgyár Street 3808. hrsz. Our company was founded in October 23, 2003. Main activity of the company was started with production of the exhaust, but this professional experience expands earlier. The production of the exhaust was started in 1998. in a single company. These goods were produced and sold on their own license. Due to increasing demand, the individual company was terminated, and the production was continued down the limited partnership. We develop our high quality, excellent, fashionable and beautiful engineered products according to the market needs. In the last 10 years, the production has been very strong both in quality and in quantity.The quantity of our production rose in high value against the first year, thanking for good prices and excellent products. We are at your disposal with special production, individual production and we keep the customer's request very important. The name "ZEUS" means modern, high quality and good service. The use of the ZEUS exhaust guarantees the highest level of performance and the highest quality. This high quality production also require technical facility. That's why we want to buy the most developed machines and equipment. www.zeusmetal.eu From 2004, the company has been cooperation partner in the furniture industry. Thanks to the technology in exhaust production, our company has been the best and largest partner of Kanizsa Trend GmbH and we are the good partners of Quattro Mobili also because of precise processing and punctual delivery. At the moment we produce 80 different models. We also help companies with planning and development.The continuous changing needs we can solve the fast reactions. The quality of the applied materials are 1st class, therefore excellent quality of our products are also. Last year we received 92% qualification from the company Kanizsa Trend. www.zeusmetal.hu (about us) Credentials: -Kanizsa Trend GmbH. -Kanizsa Design GmbH. -Quattro Mobili GmbH. -Stulwerk GmbH. -Nilfisk Advance -Ada Maschienen: - 8 pieces of AWI welding machines - 5 pcs CO2 welding machines - 4 pieces eccentric squeezing - 2 pieces boring machine - 2 pieces of hand crimping - 12 pieces of winches - 5 pieces of grinding machines with positioning system - 6 pcs edge sanding machines - 1 piece angle machine for flat steel - 1 piece CNC angle machine - 1 piece Metabo polishing machine - 3 pieces of hand belt sanding machines - 2 pieces of banding machines (nagyteljesítményű) - 1 pc of press brake CNC - 1 piece hand rolling machine - 1 piece of tin snips - 6 pcs polishing machines - 1 piece of laser cutter We plan to purchase the machine in 2014 Our Filozofie: At the moment we have 38 employees, out of which 32 colleagues work in the production. In the fall of 2009 we had a great opportunity. In addition to furniture parts, we have won a project for chairs from Kanizsa Trend GmbH. Currently we produce 14 different chairs and 10 different backs, in different surface (Chrome glossy, matt, black chrome) We have a new business partner, we have started discussions with this company in 2009, and today we have a contract between two companies, this conta...

MS is a company that specializes in plastic and metal processing. With many years of experience in the industry, we offer tailor-made solutions for companies in various industries. Our team of highly trained professionals works with the latest technology to produce high-quality products. From design and development to production and assembly, we place great value on precision and reliability. Our goal is to offer our customers individual solutions and to optimally implement their requirements.

EKESAR, was founded as a private company in January 2016 for the production of metal parts. Capa usage is 75% of which 65% export %35 domestic, with 8 WCE and 25 BCE a total of 33 MA, we provide precise project performance on 1850m2 production, 250m2 office, 200m2 supporting process total 2300m2 area. Our in-house processes; laser cutting edges Machining welding (MIG/MAG and TIG) rassemblement tracking processes; KTL powder coating Different surface coating

Thermopol GmbH — Your specialist for high-temperature seals and technical textiles Thermopol GmbH is a leading supplier of high-temperature seals and technical textiles. Based in Dinkelsbühl, Germany, the company specializes in manufacturing and selling innovative solutions for demanding industrial applications. Our products, including a wide range of seals, tapes, cords and hoses, are characterized by their exceptional temperature resistance and durability. We rely on high-quality materials such as glass, ceramic and silicate fibers to meet the high requirements of our customers. Through continuous research and development and high quality standards, Thermopol is able to offer tailor-made solutions that are precisely tailored to the needs of our customers. Our expertise covers applications in various industrial sectors, including automotive, petrochemicals, steel, power generation, and many more. Thermopol stands for quality, reliability and innovation. We are proud to offer highly specialized products and excellent service to our customers all over the world. Discover our wide range of products and be impressed by our expertise and expertise.

The company was founded in 1912 as "Otto Busse KG". We have already in the 4th Generation proved to be a reliable partner and supplier of steel components of all kinds. The family has an average of 40 employees. A team of well-trained engineers, technicians and skilled workers ensures a quality-oriented production of all our products, as well as complete technological equipment. We are in possession of the manufacturer qualification according to DIN 18800 part 7, DIN 15018, DIN 4132 and 4131st The company is certified according to DIN EN ISO 9001:2008 We deliver nationwide and includes our production: • Profile steel structures of all kinds • hall structures, catwalk and stage constructions • mast and tower structures • canopies, balcony systems, stairs • cabs, cabs and E-Houses for large equipment and cranes • Components for cranes such as trolleys, box beam, driving beam • Sheet metal components and sheet metal assemblies • Silos, hoppers, pipe fittings, pipe lines for bulk and Entsungsanlagen • weldments, even with mechanical processing • Welded frame, welded housing • Contract Manufacturing and Processing of profiles and sheets We manufacture with modern computer controlled machines. Thanks to our good technological equipment orders can be realized in the short term. For the production of the following machinery and equipment available to us: • CNC drilling and sawing

As specialists in metalworking and surface finishing, we turn thin sheet metal into precise shapes. From sample production of components to small series production, as well as the production and assembly of system components, we are regarded as a competent, reliable and long-standing partner for renowned companies in medical technology, analytical technology, optical electronics, safety technology, sensor technology and aerospace technology.

We are a medium sized company that is on Weddelbrooker dam in Hitzhusen for 60 years. In 1982, the senior handed the business over to his son, Mechanical engineer, Jürgen John Peschel. Since that time the company grew over the years to currently 17 highly motivated employees. Our services include: - Locksmith / steel construction - Special machinery of all kinds - CNC Turning and Milling - Tool - Installation works - Machinery repair (single-part production and complete overhaul) In addition, we may offer design and planning of prototypes and systems using the latest 3D CAD programs.

Metallbau Lunz is the right partner for you when it comes to metal construction or contract welding.