Since 1942, when Gummi-Jäger, the parent company of Jäger Gummi und Kunststoff GmbH, was founded, application-oriented advisory service, material-oriented construction and system related development are the key for the Jäger Group’s success. Our competence and efficiency continuously raised according to the customers’ demands. Our success is based on continuous product innovation, advice independent from the material as well as a friendly, competent service and zero-defect philosophy. The family business in its third generation operates worldwide and is a qualified partner in the field of machine and plant engineering, agricultural industry, environmental and as well as in oil exploration. Over 800 employees are working towards this goal in more than 20 sites in Europe, the USA and China.

Plastic Industrie “Utrecht” was founded in 1957 and specializes in plastic injection molding and in developing, designing and manufacturing both semi-finished and finished products. We are one of the leading plastic injection molding companies in Europe with the network to supply to locations around the world. We offer our customers a wide range of options with virtually no development or production constraints. Because of our flexible capabilities, PIU can easily supply both small and large production runs. Why Plastic Industrie Utrecht? - Flexible process from design to delivery - We welcome original ideas and the opportunity to work closely with our customers in developing new products. If necessary, we partially invest in the cost of a product/mould. Smaller series are also very welcome! - Product assembly is done by hand or fully automated - Logistics: we can transport your product to any location you require - Competitive prices - Innovation and sustainability are important to us. We work with recyclates and bioplastics - 100% in-house production for fast lead time and quick delivery - More and more companies like to use a local producer and do not always want to be dependent on production in the Far East

Our medium-sized family business offers more than just “plastic injection molding”. We support you from the initial idea to series production and support you with our expertise and 40 years of experience. With almost 60 employees, we serve a wide range of customers and produce a wide variety of technical plastic injection-molded parts, from tiny connectors (0.02 g) for the medical industry to housings (up to 400 g), e.g. for the electrical industry. Our many years of know-how in the construction of injection molds are used, e.g. for insert/outsert technology, the reel-to-reel process and the implementation of technologies such as gray space manufacturing, internal gas printing or multi-component technology. ... more advice We advise your product development on implementation, plastic-compatible design and feasibility right from the early stages. ... more mold making We build your tools in our own tool shop and also maintain them there. We can implement changes or corrections at short notice. ... more components We take care of the further processing for you and deliver the injection-molded parts, e.g. assembled, balled and printed in your desired packaging. ... more automation Our own automation system designs the optimal concept for your component, from small series to large orders.

Our company specializes in plastic injection, sheet metal forming, CNC milling (3, 4, 5 axis), and CNC turning, offering innovative and reliable manufacturing solutions. Since our establishment, we have been committed to delivering high-quality products and services, making a difference in our industry. With our modern production infrastructure, advanced machinery, and a team of experts, we bring our customers’ projects to life while upholding the principles of quality, precision, and on-time delivery. From design to production, our customer-focused approach allows us to act not only as a supplier but also as a trusted solution partner.

With our 45 process-driven processing machinery (injection molding) with clamping forces up to 4000 KN, about 2,000 high-precision technical plastic parts and rubber and rubber-metal connections are made at the time. Except for PVC, we provide you with all plastics market available. The designs of about 100 customers at home and abroad are construction and materials meet transposed into molds and tools and manufactured by injection molding. Follow-up work such as assembling, printing or conversion can also be performed. An operating data acquisition system (PDA) system with visualisiertem console and a computer-assisted quality control (CAQ system) according to the guidelines of the DIN EN ISO 9001:2000 (quality) as well as raw materials and materials testing equipment ensure the desired high quality standard. The own 3D CAD design and its own tool and mold (3D-CAM) contribute to this continuous quality production. We also have our own lathes and automatic lathes department (6-axis CNC Landrehautomaten) to produce precision turned parts and lathe parts. Main products: / Technical Functional parts made of plastic (injection) to about 2.000 grams Encapsulation of inserts, shafts, pulleys and rollers for paper transport TPU-X processing (crosslinked TPU) TSG (foam injection molding) Metal substitution Compact, insert, and 2-component technology, component manufacturing, printed housing Rubber-metal compounds (vulcanization) Tooling Turned parts and lathe parts

We are a company with over 30 years experience in metal processing and the design and production of tools for plastic injection molding. In modern CNC-controlled lathes, milling machines and grinding machines, we manufacture items or complete assemblies according to specifications and requirements of our customers. In our plastic injection we offer for over 20 years, parts for various industries ago Our qualified staff and extensive technical equipment guarantee the highest precision and reliability appointment. Stays with us no wishes open. You will be advised we qualify and comprehensive support. Ask us your ideas before we create the structures, suggest favorable production routes prior to and implement the whole project. Quality is at us in the first place On our modern metal processing machines, we can produce parts up to the following dimensions: CNC milling X-axis up to 4,000 mm Y-axis up to 1,200 mm Z-axis up to 1,500 mm CNC turning Diameter up to 500 mm Length up to 1000 mm CNC grinding Exterior: Diameter up to 150 mm Length up to 500 mm Inside: Diameter up to 100 mm Length up to 120 mm

WIR electronic, a manufacturer with more than 25 years of market experience, offers the following services: - manufacturing from individual customized single cables up to complex wire harnesses, 100% made in Germany - each product ist tested, with 5 year-warranty - consulting, design, engineering and production; everything from one source - 100% delivery reliability, with short communication channels to our customers - from batch size 1 up to 10.000 pieces, from prototyping to mass production - overmoulding (e.g. RJ45 straight/ angled; M12 connectors: A-, B-, D- and X-coded) - product range: data cables | single wires | ribbon cables | cable harnesses | coaxial cables | fibre optics | power cords | drag chains | control cables | bus cables (CAN, EtherCAT, PROFIBUS, PROFINET) | mounting/cabling of panels up to distribution boards | and many more - cables with extended or unusual length (e.g. VGA cables up to 50m, KVM cables up to 80m) - Production of cleaned cables (optical industries, medical technology, aerospace technology, micromechanics)

Röchling Medical Waldachtal AG is a plastics processing, innovative company within the Röchling Group that manufactures sophisticated parts, components, and entire assemblies for a wide range of applications (industrial and medical technology) with a broad portfolio of manufacturing and assembly expertise (injection molding, extrusion, machining, assembly). As a solution provider, Röchling Medical Waldachtal AG offers a wide range of services. From product development, risk management and validation to approval, our specialists offer solutions tailored to the customer's needs at the highest quality level, from the idea to the finished product.

SNG Plastics GmbH, from Westerkappeln consists of a team of experts with 30 years of experience in injection molding. Article in no time To produce in your highest quality at attractive conditions is ours Philosophy. Whether large or small series: We put your order quickly and Precise - from the first draft, through production, to the punctual Delivery. Because we always have one thing in view: your success!

Prototypes, spare parts and small series in metal and plastic; The prototype construction is prepared with special 3D hardware and software (scan, construction, simulation). A diverse technology combination of 3D printing and casting techniques helps to produce sample or functional parts using metal investment casting (aluminum, brass, zinc to steel) or plastic vacuum and injection molding (PU or injection molding materials). In addition, various industries are supplied with special 3D printed parts; Functional parts where 3D material is sufficient; lost models to investment casters; Objects of illustration in medicine; SPECIAL IN-HOUSE PROCEDURES: * 3D-ENGINEERING_SYSTEME: construction, scanning, simulation (loading / FEM, casting simulation) * 3D PRINTING TECHNIQUES (additive manufacturing via SLA, FDM and Voxeljet) for the production of design, concept and (depending on requirements) functional models; * VACUUM CASTING TECHNIQUES for the production of small series in various plastics * FINE CASTING TECHNOLOGIES for aluminum, brass, zinc (cuvette differential pressure method) as well as for tempering and stainless steels (shell investment casting) * RAPID TOOLING techniques for the rapid production of injection molds from both aluminum inserts or from cast resin components; SERVICES * DEVELOPMENT SERVICES such as design, engineering (FEM / simulation), construction, Confirmation of active principles * MODEL PROVISION accompanying development to optimize new technical products (e.g.B. Pumps) or their components (e.g. impeller geometries) * ITERATIVE DELIVERY OF PROTOTYPES in the original material for test and investigation purposes with constant adaptation of geometry and parameters * SMALL SERIES AND FUNCTIONAL PARTS from 3D printing, vacuum casting (plastic) or investment casting (metal) for motorsport, maintenance, one-off production * MODELS FOR FINE FOUNDERS thanks to rapid production using 3D printing or wax casting

The experiences with many different plastic processing's and the equipment for elastomeres enabled a specialisation on alloys. Today we process today the following materials: •all reinforced and non-charged thermoplastics •their copolymers •different types of thermoelastics •all important elastomeres a.e. NBR, SBR, EPDM, FPM (Viton), Silikon and HNBR. We buy standard elastomeres as well as those according to our own recipes. Our range of production: •injection-moulded pieces of thermoplastics •moulded pieces of rubber •O-rings up to 500 mm diameter •Alloys of plastics and rubber

Plast Moulding is an eco-responsible experienced partner who offers “turnkey” solutions in mono and bi-material plastic injection and assembly of sub-units. Our multidisciplinary team addresses at every step of the production the environmental concerns of our clients, in line with their specifications. Plast Moulding is located in Besançon, capital of the Franche-Comté area, recognised all over Europe for its specialisation in microtechnology. Our total package is based on a strategy of innovation and proximity, as well as product specialisation that allows a better adaptation to the needs and expectations of our clients. Our strategy is to work hand in hand with the development of parts and sub-units by our clients, by providing them a global offer. Our Development and Industrialization teams bring you their expertise in your projects, as your technical partner.

Our drive elements made of plastics are manufactured exclusively by injection, optionally at special rework in machining processes. With our advanced injection molding machines and by ongoing investment in current technology, we are able, our products cost-effective and automated at the highest level to manufacture. The injection molding process allows us to produce both parts with high accuracy as well as mass-produced in a short time. The necessary tools for this are either already available or are prepared by Zipperle itself. In addition, we also manufacture special parts in various geometries and in a variety of chemical-resistant plastics. AKROTEC - a new material made of aliphatic polyketone (PK) This material has high mechanical properties, has very good chemical resistance and toughness Shock loads, as well as a very high abrasion resistance.

We see ourselves as all-round service provider in the field of plastics technology. From consulting to prototyping, mold and tooling to manufacturing assembly and dropship we offer our clients comprehensive solutions and services from one source. Our particular strength lies in the quality and performance characteristics of our production. In addition to our top technical equipment we use only the best-prepared materials. Our specialty is the high gentle drying of various plastics. The relevant specialized and trained staff are employed at the place in the company. The motivation of our team is the long-term guarantee that our injection molded parts arrive on time and in the required quality at the customer. Especially in small quantities, flexibility and speed is our strength.

POWER-CAST Light Metal Solutions GmbH & Co. KG mounted assemblies, according to modern production methods such as PokaYoke, Just in Time, One Piece Flow and the highest priorities for the quality factor, in large and small series. As a modern installation service we offer assembly lines not only for the automotive industry. Our expertise is diverse industries advantageous for lightweight systems, production assembly, and weight optimization modules are an issue for many manufacturers. Outsourcing reduces your production costs: The advantages: - Goal-oriented project process - Additional production capacity for peak periods - Relief of own production with smaller series - Ensure delivery at bottlenecks in production - New ideas in product development and in the assembly concept Our competencies: - Assembly / Installation Services - Logistics - Development, design and project management - Expertise in lightweight aluminum and magnesium die casting - Diecast zinc - Surface coating - Shoring of high-quality interior materials Certified to ISO / TS 16949 and DIN EN ISO 14001.Qualified staff, structured processes and the use of modern technology in production and test methods are the building blocks for the highest standards of quality. As an additional service, we assume, of course, in the short term, assembly parts in transitional phases. As a system supplier, we support your product, even from the beginning, helping you to reduce costs and solve capacity bottlenecks.

We are a plastic processing company (injection molding) with 14 machines from 20 to. to 275 tons. Clamping force, injection weight to 450 gr with its own tool.

Magnetic Media Mechanics Ltd. was founded on the 9th of October 2000, as an independent company on the territory of former big factory “Magnetic Media” Co." It is situated near the motorway, in Dragor, municipality of Pazardzhik. The company is 108 km away from Sofia and 35 km away from Plovdiv. MM Mechanics Ltd. is situated on 8 000 square meters all-out area and has its own buildings, machines and equipment. The company is specialized in mechanical processing of aluminum and steel parts, production of varied tools for flooring, all kinds of galvanic coatings and powder coatings. MM Mechanics Ltd. also produces different kinds of assemblies, as well as non-standard machines for varied processing and current repairs. MM Group - Production of tooling – press forms, molding forms , punching tools, tools for forging - Aluminum die casting under pressure – with machines from 200t to 650 t. - Alloying of aluminum and zinc alloys - All Types of machining - Galvanic coatings – bright and chemical, manganese and zinc coating, chromium plating, - Molding of plastic parts - All types of heat treatment, cementation - Powder and liquid spray coating - Manufacturing of joint bolts, tips and rods for cars - Production of tools for floor covering - Assembling line of meetings and products - Milling and turning (CNC machines) - Stamping, Deep drawing, Forging - Grinding, Heat Treatment, Welding

We offer: Plastics Processing Product design, development, support and advice from the idea to the finished product. Assistance in material selection Design and manufacture of injection molds Manufacture of plastic injection molded parts up to 300 grams weight Assembly Pre-series (SLA, SLS, vacuum casting) and finishing with external partners We offer beyond that: Refinement of injection molded parts, special surface treatment (painting, printing, embossing, etc.). By external partners Assembly of components (including orbital riveting) to reduce your production depth High-performance tools and motivated, well-trained staff provide a high level of quality.