Since 1988 we have been a recognized workshop for mentally handicapped people who, due to the type and severity of their disability, cannot be employed on the general labor market, or can no longer or not yet be employed again. In our metal processing we have the possibility to produce turned and milled parts on modern CNC lathes and the 3-axis machining center. In addition, we can offer cuts on vertical circular saws and band saws. In addition to metal processing, we have several assembly and packaging groups at our site where parts can be assembled and packaged. compensatory levy According to the Social Security Code (SGB) IX § 71, every company with at least 20 employees is obliged to employ severely disabled people. The employment rate is 5%, so that for every 20 employees, one severely disabled person has to be hired. If this percentage is not reached, a monthly compensatory fee must be paid. An order placed with the St. Josefs-Werkstätten Plaidt helps you to minimize these costs or save them entirely, since you can offset 50% of the work included in our invoice amount against the compensatory levy to be paid. The respective amount is shown separately on the invoice and can therefore be used immediately as a certificate for the integration office.

ZSO sees itself as a competent supplier and service provider in the metal Zerpanung (turning, milling, grinding) and component assembly. In the area of contract manufacturing (turning, milling, grinding and surface treatment), we offer our services from small series to medium runs with great variety. Here, the annual volumes of 5,000 St. can (with high complexity, Dreh-/Frästeil 50 min processing time) vary up to 1.4 million St. (simple turned part, about 1.5 min. Processing time). The possible workpiece sizes reach the maximum diameter of 400 mm when turning. In radial grooves on the outer contour may occur reduction of the workpiece diameter. During milling, we can work with our machining centers cube sizes up to 1000 mm. We also perform desired by impermeability tests also. The company ZSO GmbH is a company of senata GmbH (www.senata.de), an owner-managed medium-sized companies with a high share of equity.

Our experienced mechanics specialize in the assembly, disassembly, and repair of automated production lines, preventive maintenance and service of machines, supply of spare parts, leveling of conveyor systems, conveyor belts, machines, and equipment using rotary lasers, and much more. We manufacture small and medium-sized steel structures, components, and parts for automated lines, repair manufactured parts, and manufacture machines and parts to order. We refurbish old parts and machines.

Wefapress Beck + Co. GmbH, headquartered in Vreden, Germany, manufactures ultra-high-molecular-weight polyethylene (PE-UHMW) and high-molecular-weight polyethylene (PE-HMW) and processes these and other engineering plastics (POM, PA, PEEK, PTFE, PET and more) into finished parts and semi-finished products. The offerings range from sheets, chain guides and steel C-profiles all the way to individual plastic parts produced from drawings. The owner-managed company was founded in 1895 and today employs some 100 people. Wefapress serves various sectors, such as materials handling technology, the filling and packaging industry, the paper industry, the food industry, and machine construction. With a production area of 20,000 m², continuously modernized pressing systems, perfectly equipped machinery, and, last but not least, high qualified personnel, Wefapress ranks as a key player in the plastics market.

The family enterprise is a leading manufacturer, supplier and service partner for their international customers in 3 fields of activity: - Technology in Metals - Technology in Plastics - Standard Products Angenstein AG is a reliable partner and system supplier for a large part of their clients demand: parts and components, sub-assemblies, welded constructions, machines, apparatus and innovative products for the process industry in metal and plastic. Angenstein AG produces in their own plants in Switzerland (plant Egg and Birs) and France (Cernay). Angenstein has it's own puchasing organisation in China (Shanghai). The company's quality and management system is certified acc. ISO9001:2000 and EN3834-2 (quality requirements for fusion welding of metallic materials). Angenstein AG invests continously in optimization and modernization. Some figures (2013/14): 150 employees, 35 Mio. CHF turnover, 36 CNC-tooling centers,14 welding technologies, 58 certified welding approvals, 1200 tons of primary material on stock, 1650 standard products.

As a production partner to Original Equipment Manufacturers for more than 50 years, Optiwa B.V. (Optiwa) supplies our customers with precision mechanical parts and mechanical assemblies. Optiwa's critical success factors lies in its efficiency, design for manufacturing (DFM) support and a highly efficient production of products to tolerances in the sub-micron range. A team of skilled personnel ensures an uninterrupted production flow of products that meet specifications, quality and delivery commitments - time and time again. Optiwa is your first choice partner for series production of very accurate and complicated products at the right cost. Capabilities * Range of state-of-the-art machining centres * Turning and milling of very small parts to big parts up to 800mm * Range of robotized machines for production 24/7 (minimum supervision and lower production cost) * Sub-micron technology * Precision mechanical assemblies (vacuum cleaned, where necessary) * Series production up to thousands per annum * Controlled environment measuring department * Excellent supply base of surface and thermal treatment services * Design for manufacturing (DFM) support

Specialists in plastics processing. We realize components on customer's design. Turning, milling, shaping, polycarbonated bending, partial assembly of equipment, quality control. All our processing is free from chemical agents and all our components are not contaminated by lubricants.

the company Roland Fischer GmbH in winter Bach enjoys in precision turned parts manufacturing for decades a special reputation for their expertise, quality and reliability in the manufacture of turned parts. Like some other Swabian component manufacturers with widely known in Europe, they could also earn a special place in their area. Surely this reputation for delivering precision work immediately reliable, the ability of the company contributed mitzutragen new developments, they operate in a very short time and produce prototypes. The Roland Fischer-production program includes over 1200 different precision turned parts. The diameters are from 1 to 22 mm. We also manufacture turned parts up to form 43 mm diameter. With cross and back machining. The following materials are used: Aluminum, stainless steel, brass, titanium alloys, cutting steel Our turned parts include the following range of parts: Axes, adapters, adapter bolts, adapters, panels, bolts, bushings, bypass screws, spacer bolts, spacers, spacers, throttle spindles, pressure rollers, jet inserts, jet needles, set screws, eccentric, lead nuts, guide pieces, sleeves, clamping screws, magnetic pin, magnetic screws, adapter, circuit boards, pole cores, detent pins, reducing connector, push rods, studs, styli, adjusting, stem nozzle, truing, inter alia,

Due to our manufacturing depth we are to take to the production of the complete assembly in a position all the tasks of developing and Konstrukion about the single and series production. Especially in the vacuum and clean room technology grab as many customers back on our experience and manufacturing technology.

At Lugal Teknik, we embrace the principle of providing reliable, innovative, and high-quality solutions to our customers. In every area we serve, we strive to maintain and continuously improve quality in: 🔧 Machinery spare parts manufacturing, 📐 Reverse engineering and design, 📦 Technical and in-direct procurement. The cornerstones of our quality policy are: Maintaining the highest level of customer satisfaction, Ensuring compliance with legal and sectoral requirements, Making a difference with advanced engineering solutions, Prioritizing efficiency, safety, and sustainability in all our processes.

We offer checking, welding and assembly fixtures for vehicle components, for all metal and plastic parts, based on our experience. Over our many years in the automotive market, we have developed a wide range of our design and manufacturing services: – Checking fixtures & gauges, – Stations for semi-automatic assembly, inspection and testing parts – Resistance welding fixtures – Precision custom parts for machines and devices – Moulds for vulcanising rubber hoses.

TINTEC Metal Technology is a certified welding specialist [DIN 3834-2, ISO 9001 iV] for holistic, sophisticated technology and complex welding sheet metal assemblies in steel, stainless steel and aluminum. We specialize in sheet metal fabrication for housing, container & industrial equipment, tanks & tanks, ducts & pipes / flanges and allocations, as a complete assembly with in-house development and design as well as our own production. Production chain with complete sheet metal technology from cutting (laser cutting, punching, shearing, burning) on the deformation (edges, bending, forming, rolling, rounding) with core expertise joining (GMAW, TIG welding, soldering, bonding) to the surface (grinding, brushing, galvanizing, paint / powder). Massive steel construction welding assemblies & to 6 tons with welding qualification according to DIN EN 1090-2 EXC 3 Complete production from one source from prototypes & item to small - medium batch & high quality craftsmanship at a reasonable price level with expert advice and customer care. The company was founded in 2006 with 10 employees is dynamically grown into a SME with now 45 qualified employees - from trainees on skilled workers, foremen and technicians to welding specialist and Welding Engineer. Currently, about 3,000 square meters of production area with stainless steel / mild steel separation and 15 integrated welding workstations for manual and semi-automatic MIG / MAG & TIG welding. (& Conveying equipment Food - - & Beverage, tobacco processing, filling,), air - space, ship, - & yacht building, vehicle and machinery - equipment - Regional and nationwide are demanding customers in the food industry & Apparatus reliably and continuously served.

Experts in Sheet Metal Fabrication / www.smates.mk / info@smates.mk / +389 71 305 806 At Smates, we specialize in precision metal fabrication, operating from a 2,000-square-meter facility equipped with advanced machinery. Each year, we process over 400 tons of metal, providing high-quality services to OEMs and manufacturers across Europe. Our team of experienced engineers and operators can work in three shifts when necessary, ensuring efficient production and minimal material waste to meet demanding project deadlines. We leverage cutting-edge technology, including 3D CAD software and SolidWorks, to design and optimize custom components for our clients. This allows us to deliver highly accurate and efficient solutions, no matter the complexity of the project. Our expertise and reliability have made us a trusted partner for EU-based companies, offering cost-effective and timely results. Our comprehensive range of services includes tube laser cutting, sheet metal bending, and powder coating. With a strong focus on innovation, Smates continuously invests in the latest technology to ensure we deliver the best fabrication solutions, helping our clients achieve their goals.

We are your specialist for pressing, stamping and deep drawn components for all levels and materials, welding (MAG, TIG, resistance welding), laser machining, nibbling, edging, drilling, tapping, processing all surface finishing, component assemblies.

Welcome to FMT Installation, Servicing and Industrial Plant Manufacturing The FMT Group has set new standards in the field of installation and servicing of industrial plants. In addition, FMT shows competence in the field of planning and construction of machines and plants. FMT takes responsibility for a smooth project development and accompanies you along the entire life-cycle of your plants.

Specialist in welding carbon and stainless steel and aluminium. Producer of offshore containers, trailers chassis sandblasting boxes and others. All required certification and testing included.

The Valder plastic-GmbH is a manufacturer of high quality injection molded plastic parts up to 1,250 g We manufacture small series of 500 pieces from almost all thermoplastics. We produce, inter alia, for the packaging industry, medical, sanitary engineering and vehicle construction. Other products can be found on our website! Get Just a quote for tools and / or plastic parts with us! We will help you!

We are a medium sized company and have specialized in the areas of tool and mold as well as special purpose machines, jigs and fixtures. You will find our Operational 25 km from Hannover, Neustadt a Rbg .. in the district of Basse. There you will find our experienced team of 65 employees. We offer the following services: Tool and Mould Contract manufacturing in the areas of CNC milling (3/5 axis) and turning  Product Development  Prototyping  2D/3D - Construction  Tools and forms  injection molds  Punching tools and devices  Individual production according to customer specification  Special purpose machines  machinery and equipment including construction  Installation and commissioning on site

Services of Hametec AG include the contract manufacturing of CNC machined and - turned parts up to 5 axes, welding TIG MIG MAG, punching, folding and bending work and the glass beads. The areas of expertise are diverse, most notably the production of Chromstahl¬ assemblies and welding technology are among the strengths. We are quickly and proactively and offer also the following services: - Delivery in KANBAN - Comes with storage - Delivery of safety parts "Charge Professional" - Plastic parts in "food grade" Continuous improvement as an added value for our customers Our exceptional CIP approach is a key element of our success. We are convinced that we can offer our clients significant added value with our CIP methodology, which helps them to become more competitive. Our customers have benefited this year from product savings of 3-28%. Try us.... Ask for our corporate presentation and see for yourself how we value our customers. Translation by Google Translate