As a long-standing supplier of well-known German OEMs, we are mainly engaged in the production of individual body parts and assemblies through to ready-to-paint hang-on parts. In doing so, we can represent almost all steps of product development in-house: - Method planning and forming simulation - Tool and equipment design and production in-house - Manufacture of individual sheet metal parts and sub-assemblies made of aluminum or steel - manual or robot-assisted production of complex assemblies (e.g. side doors, front flaps, tailgates, spoilers, tank and load hatches, etc.) Our flexible and experienced employees as well as universal manufacturing systems enable us to economically represent both prototypes and small and medium-sized series of large parts (car sidewall, floor groups). Even in the high-volume sector, we support our customers with smaller components (e.g. tank and loading hatches). Of course, we also have sufficient experience and the technical capabilities to implement manual joining technologies, such as resistance point, MAG, MIG, TIG welding, nut and bolt welding, punch riveting, clinching, roll folding, gluing, etc. With our manual transfer large and servo-hydraulic transfer presses including decoiling system and circuit board cleaning, 3D lasers, universal robotic systems, a CNC-controlled shell furnace and also the finishing of outer skin components, we believe that the ideal conditions are available to also take over your component supply. We are also happy to answer your inquiries about production relocations or spare parts production after series production has ended, with downstream KTL coating from long-standing partner companies if required. Components for metal chair furniture (metal seat shells/frames) round off our portfolio even outside automotive production.

Our company TELSAMA Spring and Wire Forms ( www.telsama.com ) established at 1996 and since 2000 worked on wire, wire forms, strips and strips forms. As a result of customer satisfaction oriented working and quality, we are exporting 80% of our products to Denmark, England, Germany, Spain, Sweden, Israel, Taiwan and UAE. Our production capabilities: Compression springs: 0,15 mm - 1,00 mm Extension Springs: 0,20 mm - 3,50 mm Wire Forms: 0,20 mm - 10,00 mm Strips Forming: Up to 1,50 mm strips thickness We are dedicated to reliability, high quality and safety oriented production, will continue on his way with the same respect to our job and will always welcome you as always done with ISO/TS 16949 and ISO 9001 quality certificate. For more information please visit our website www.telsama.com In order to show how our prices are convenient, benchmark is our biggest strength, we are willing to have your technical drawings to quote without any obligation or charge. By the way, all your inquiries between the quantities 1 pcs to 10.000.000 are welcome. The company excels in manufacturing small and large quantity series as well as extremely complexed and accurate prototypes produced with the highest level of precision and quality. It will be a great pleasure for us to work with you. All the best & hoping to hear from you soon; Best Regards, Tamer KUNLAR l Genel Müdür l Managing Director Telsama Metal Dan. İth. İhr. San. ve Tic. Ltd. Şti. Address: Minareli Çavuş Mh. Milas Sk. No: 14C 16140 Nilüfer / Bursa / Turkey l Tel: 90 (224) 411 10 91 | Fax: 90 (224) 411 10 92 | gsm: 90 (532) 556 05 13 email: tamer@telsama.com l www.telsama.com

RMB GmbH have been working on the development, construction and manufacturing of special machines and plants for over a decade. The firm was founded in 1993 as manufacturing company under the name of PMT GmbH. Early 1995 the management decided to expand and to discover new markets. The assembly of production groups and plants was integrated in production programme and a certification by DIN ISO 9000 was done. In 1998 the name of the company was changed into RMB GmbH. Today a flexible team consisting of developers, constructors and production specialists work with most modern technical equipment on an area over 1,200 square meters. We guarantee solutions, exactly made on your requirements in the fields of engineering, construction and production. Our success is proved by our customers which granted us the title “Best supplier of the year”. Responsibility is a substantial key-word in connection with special machine production. Complex high-tech production- units for innovative products from various fields are our speciality. We undertake advising and planning responsibility, from the production till the final assembly. The great experience from the various technologies is our advantage. - 3D-CAD planning / design (Solid Works; Solid Edge) - Simulation - High vacuum engineering - Vacuum technology - Sputtering - Pneumatics - Hydraulics - Automated technology - Control unit manufacturing With a network of high-specialised sub-suppliers all over Europe we offer complete project-management from the beginning till the delivery of the final product. Our customers will have substantial advantages in organising. There is a project-manager, who co-ordinates and controls everything. He is in charge of a quick information flow and reports steadily about the status of the project. The flexible and made-to-measure power performance is a matter of course for us and our assistants. Planning: Exact planning is decisive for later development. Here the targets are fixed and co-ordinated with the specific requirements. The nearly 100 % function as well as the non-failure guarantee are also included as well as the optimal ergonomically timed operating elements and last but not least an attractive machine design which fits to the image and the statements of your company. All components together lead to innovative products which enables you to realize your product ideas. Development: To fit various components to one piece, to optimise the interfaces and so to be responsible for the complete function of a complex machine is one of RMB Technologies basic competences. The interfaces to the technical production units are done by a powerful 3D- construction and simulation-software. Produktion: With todays production-technologies precision is not only a solution promise but a fact of daily work. With our high-tech machine park we are very well equipped to manufacture unique parts within strict tolerances. Our range of products contains manufacturing of unique parts, small and middle batches as well as the realisation of prototypes. Our point of main effort is the handling and working with special steel, nonferrous metals, casting material and plastics. Quality: The future starts now in the presence. Re-Development and to be always one step ahead, is an important policy in our company. This is reached on the one hand by steady improvement and by using the newest production technologies on the other hand. Our suppliers are consequently attended to and professionally supported by QM-systems that fulfill our demands. To satisfy our own high standards, QM-system on the basis of DIN EN ISO 9001 was introduced and will be up-dated steadily.

We are one of the largest companies in Lithuania offering a wide range of metal processing services under one roof. We provide comprehensive metal processing services, from cutting to painting.

In addition to our own special machines, which we manufacture in-house, our service also includes the production of prototypes, individual and small series parts as well as the assembly of entire components and machines. In order to produce complete assemblies and complex production parts, we can rely on long-standing competent partners who support us with services such as cylindrical and surface grinding, eroding, broaching, sheet metal and welding work, and electrical engineering. Of course, we can carry out all heat and surface treatments on request.

Our industry, Rei Tregi srl, has been manufacturing fittings, valves, taps for the civil and industrial use in the water – gas - marine - compressed air - fire protection and household appliance sector since 2000. Thanks to the long experience and know-how of the ownership, constant investments in modern technology, a professional team expertise, the UNI EN ISO9001 certification and strict quality controls, we are able to support our international partners throughout the entire production process (99% export). We are specialized in producing high quality customized solutions: we turn – forge/press – cast - machine from simple components to very complex ones in different alloys at very competitive prices (also plastic injection). They are produced with the specifications and drawings of our clients only. We have the total control from the raw material to the finished packed product. Our portfolio includes many European companies, also in your field , that have chosen us as trustworthy suppliers with long term cooperation relationships. On this page you find our company fact sheet and our brochure is available on our website: https://www.reitregi.it/en/ We would be pleased to speaking or meeting with you in order to analyze your Product needs. By sending your drawings and specifications we could quote you without obligation our best offer to let you verify our price/quality ratio. We look forward to receiving your kind feedback and have the chance to cooperate with your company in the near future. For further information we remain at your disposal and thank you for your kind attention Mit freundlichen Grüssen / Best regards / Cordiali saluti Silvana Martinelli Manager of International Customized Projects for Technical Metal and Plastic Components Rei Tregi Srl Via Neziole 3 25055 Pisogne (Bs) export@reitregi.it www.reitregi.it Mob. +39 393 811 5943 Ph. +39 0364 899020 Fax. +39 0364 86772

With around 30 injection molding machines ranging between 40-200 tons of feed, rekuplast GmbH is the perfect partner for manufacturing components with an injection weight of 0.05 to 500 grams. Our machinery consists primarily of Arburg and Demag Sumitomo machines. This puts us in an excellent position in terms of accuracy and reliability. This is also reflected in our permanently statistically monitored machine and process capabilities. In our injection molding production, we produce quantities of 100 to 40,000,000 pieces per year for individual parts. In higher quantities, the processes are fully automated, depending on the complexity of the component. To ensure perfect series quality, every component is produced with the suitably configured machine. The feed and screw ratio are optimally tailored to the component — without compromise! Compliance with specified process parameters is a matter of course. Our organization is structured in accordance with the 5S philosophy in terms of order and cleanliness. In doing so, we attach great importance to a targeted material flow and use a portal conveyor for this purpose, which connects production with storage and shipping. This ensures FIFO and batch traceability, from raw material to delivered component.

Arfino specializes in the production of precision-turned components in brass, bronze, and aluminum, with a particular focus on lead-free alloys. The most refined surface finishes and the tightest tolerances emerge through the use of the highest quality machinery and tools. The company, aware of the need to systematically and documentedly ensure a high quality standard for its products, has established a Corporate Quality System that meets the needs of its customers.

We are a laser service provider with 4 locations, around 350 employees and over 30 years of experience. Laser service provider in 3D lasering. Laser cutting/laser welding. Manufacture of laser edged parts. We are happy to offer roll straightening and projection welding.

Textile logistic and solutions. Trucks to load/unload warp beams and fabric rolls on looms. Winders and rolling machines

The CEBES a.s.company was established in 1999 and with a considerable portion of its production it carries on a tradition of more than 60 years in manufacturing commutators, brush holders and slip rings at MEZ Brumov Company. The company also carries out repair of commutators, brush holders and slip rings. The CEBES a.s. company has implemented and operates an Integrated Management System. The company holds certificates for both the ISO 9001 Quality Management System and ISO 14001 Environmental Management System.

Hummel Plastic GmbH Hummel Plastic GmbH is a modern equipped operating, the "manufactures for over 40 years technical precision plastic parts" just in time "and economically. With currently almost 10 employees serving the industries: - Automotive - Electric - Mechanical Engineering - Furniture - Pharmaceutical / Medicine With our modern machinery, we can produce precision parts up to a weight of 180 grams. We process all thermoplastics such as ABS, PE, PP, PA, PC, POM, PVC, and a variety of elastomers. Our range of services includes any work around the plastics processing. - Advice and execution in the points and mold construction - Printing, painting, welding - Assembly of components We support you in your specific application with expert advice from development to mass production. Our strengths lie in the production of: - Transparent, highly sensitive plexiglass and polycarbonate parts - Gears, high precision - Housing - Hide - Covers - Seals - Handles, bushings, and much more.

R.Biemme-Tech was a manufacturer of powder metal structural components. Our main products: structural parts, gear wheel, piston, plug and so on. The strength of its business philosophy, is the ideal partner for development of OEM applications, offering functional solutions, which optimize the total product of the customer. R.Biemme-Tech strongly believes that the productivity boost based on the industrialization of products, is the new frontier of the future in the mechanical field. R.Biemme-Tech has now become a real partner for the development of experimental components and analysis of construction problems, achieving high performance in powder metallurgy and an adequate price / quality ratio. Qualified technical staff will follow the customer during the study, prototyping and commissioning of industrial product. R.Biemme-Tech has as main objective the satisfaction of the customer in every aspect and detail, addressing the different needs, both in economic and technological. R.Biemme-Tech offers its customers: - Service, Design and Codesign - Absolute Transparency Service - Total Service Guarantee Strength and pride of R.Biemme-Tech is the ability of engineering, providing solutions before products. R.Biemme-Tech is responsable for: - perform functional design of complex systems, not strictly related to powder metallurgy - carry out the verification of resistance and structural calculations for the preliminary study of the reliability of the product - industrialize the components and process

Whether tools, gauges, equipment or individual serial - we supply the technology needed by our customers today and can meet the growing demands in the future. We take the position of the communication interface as well as that of the leader. So we make ourselves responsible for the services provided and learn from the feedback. In our technology pool constantly new customer needs to be recorded, analyzed and elaborated problem-specific solutions. Due to the constant improvement in all areas we want to remain competitive in the future and ensure our financial independence. Was the focus and it is to delight our customers through great personal engagement and thus long-term loyalty to us. Mature, promising high-quality products are an essential prerequisite. In cooperation we live according to the following principle: "Customer satisfaction is our highest priority." This, together with our proverbial flexibility sets us apart from the competition.

Dear Sirs, The tech group Genthin is an owner-managed family company whose origins can be traced back to the establishment of a company in 1990. At the beginning, Mike Pietrzak traded in automotive parts and accessories. The company's change to today's tech group was the result of economic changes. These were used through sensitivity and a helping of courage to realign oneself. After completing their training, he began to involve his sons in the company. They should continue the traditional company and raise additional pillars. In 2016, the family's business acumen proved to be correct once again, and the market expansion in the industrial and energy sectors was successfully accepted. The Genthin tech group with 50 employees is now known throughout Germany in certain industrial sectors. The number of employees is increasing steadily and thus the company is broadly positioned in the trade and industry in the highest quality. The areas of application of the subsidiaries are divided as follows: Moto-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin - CNC processing according to drawing (with or without certificate) as well as special, individual and series production (travels: X1060, Y600, Z600 mm / table sizes: 1200x600 mm) - mechanical processing / contract manufacturing (turning, milling, honing, surface grinding, point grinding) - Repair, maintenance and repair of internal combustion engines (e.g. Deutz, CAT, MAN, Mercedes, Hatz, Kubota, MWM etc.) - Procurement of spare parts and replacement engines - Radiator cleaning and repair Service-Tech Genthin GmbH, Parkstr. 6, 39307 Genthin - Maintenance + repair of industrial equipment and engines - Troubleshooting - Container and plant construction (all materials) - Stainless steel welding and apparatus construction (as a subcontractor with CL1 certification) - Complete support of CHP and emergency power systems Elektro-Tech Genthin, Parkstr.6, 39307 Genthin - Electrical installation in residential buildings (conventional and smart home) as well Industrial and government buildings - Electrical installation, maintenance and repair of automation technology - Electrical installation / repair on industrial plants and vehicles - Equipment check (stationary and mobile) - Generator and electric motor maintenance as well as repairs (external) - Supervision, installation, retrofitting and maintenance of street lighting KFZ-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin - vehicle repair - Painting of industrial furniture and automotive parts - tire service - bodywork - Spare parts trade - TÜV and AU - insurance benefits - Vehicle fleet service for larger companies (with provision of a Workshop replacement car tailored to the corporate customer) All companies in the Genthin Tech Group are DIN ISO9001 certified and, despite their large number of areas of application, have a flat hierarchy.An operations manager or deputy is available to you as a contact person and specialist for each area. The accounting of all companies is organized jointly by the tech group. Our management is at your disposal for business matters. Partnership relationships as well as individual projects are gladly handled and maintained together with operations managers and the management. If you are interested in our group of companies, we would be happy to speak to you personally. You are also welcome to obtain more information on our website www.techgruppe-genthin.de. Wit...

The Grabacz GmbH & Co. KG has been working since June 2003 in Münster. We specialize in the precise order manufacturing in the fields of - CNC turning - Erode - Micro-hole drilling - Milling - Grinding (cylindrical grinding and surface grinding) - Drilling - Welding and - Module assembly specialized. In addition, we can offer them editing options through our partner companies. We look forward to your inquiries!

We are still in the start-up phase. Are only active since 01.10.2017 as a subcontractor in Dortmund.

aeoon Technologies GmbH – Your Specialist for Mechanical Engineering, Mechatronics & Automation aeoon Technologies GmbH, based in Kramsach, Austria, is a trusted manufacturer of mechanical components, mechatronic assemblies, and custom automation systems. We offer end-to-end solutions – from precision machining to fully integrated system assembly. Our core services include: • CNC machining (milling, turning, drilling) • Mechatronic system assembly • Wiring • Automation & handling systems • Functional & quality testing With a high in-house production depth and state-of-the-art facilities, we serve clients with prototype parts, small series, and complex OEM assemblies. Our focus is on quality, precision, and on-time delivery. Let’s talk about how we can support your manufacturing and assembly needs!

We are a specialist company for mechanics and metal construction technology in Schwandorf in the Upper Palatinate.