Materials A demand-sorted material storage provides the conditions for short delivery times, maximum flexibility and punctuality. Also, the materials used, the quality plays a decisive role: For use only high-quality cold-rolled strips reputable, certified mills come. Materials are processed from 0.05 to 10 mm thick and coil widths up to 400 mm. The range of materials includes the following qualities: Unalloyed steels according to DIN EN 10139 Hardening steels according to DIN EN 10132-2 Quenched and tempered steels according to DIN EN 10132-3 Spring steels according to DIN EN 10132-4 Stainless steels according to DIN EN 10088-2 Aluminum and wrought aluminum alloys according to DIN EN 485-1 and DIN EN 485-2 Copper and wrought copper alloys according to DIN EN 1652 and DIN EN 13599 Hard paper, pressboard, plastic Toolmaking The quality of the tool is one of the most important prerequisites for trouble-free and efficient punching parts production. The tooling of E. Winkemann manufactures tools with highest precision. The field of tool / construction is equipped among others with the following devices: 2D and 3D CAD systems in the field of tool design CNC EDM, drilling, milling and jig grinders with CAM connection The exchange of design data is in IGES or DXF format. For around 6000 are consequential, composite, flexural, and embossing tools or total cuts available. Stamping technology The stamping of E. Winkemann is equipped with a powerful machinery, responsive to the diverse areas of use and the materials to be processed. The machines range from mechanical or hydraulic punching machines and presses to various bending machines: Hydraulic machinery and punching machines (25 to 500 tons) Eccentric (10 to 35 tons) Hydraulic presses (15 to 200 tons) Punching and bending machines (up to 15) Stamping machines (up to 200) Fine blanking machines (up to 700) Fineblanking / cutting The fine blanking allows the production of precision parts with smooth cut surfaces and high dimensional accuracy. Costly rework can be omitted. Straight-cut percentage up to 100%. The fine blanking machines with max. 320 tons pressing force can process material thicknesses up to about 7 mm. In addition, there is also the possibility of products on fine blanking machines with max. To process 700 tons press force. Flatting If the required thickness tolerance or flatness can not be achieved by cold rolling with the primary materials with a thickness of 0.8 mm, the parts are ground flat. The result is a thickness tolerance and flatness of ± 0.005 mm. High demands of these parameters are primarily intended for products which are used for example in units and transmissions. Representing this are start-up, passport and shims to call. Fine grinding Slices or moldings with a thickness of 0.8 mm and an outer diameter 4.0 mm könnnen be honed for maximum precision requirements with a tolerance of ± 0.001 mm. Post For the post-processing of the products are modern, electronically controlled and linked compensation and processing equipment available: Fully automatic compensation system with process data acquisition and batch documentation Program-controlled systems for automatic vibratory deburring Washing and cleaning equipment Machines and assembly equipment for drilling, tapping, riveting, stamping and assembling. Surfaces All parts ...

Job shop for plants and plant parts including Oberflächenbahandlung and Assembly Manufacturing of welded construction; production of CNC milling and CNC turning parts, delivery of laser cut parts

As a modern and innovative medium-sized company, founded in 1983 with currently about 50 employees in the field of sheet metal processing and welding designs to customer drawings, we are specialized for individual parts and small series. We offer our expertise both for mechanical engineering, apparatus engineering, automotive and many other companies, the individual production solution from one source. We manufacture each order according to your wishes and ideas with the help of modern machinery and our years of experience. Here, our production range from simple sheet metal cutting to special machine. With our design department we can assist you with our knowledge in finding solutions to your problem. Metal goods, apparatus, punching, laser center, Metalldrückerei. Subcontractor to the compl. Blechblebearbeitung and assemblies for mechanical and apparatus engineering, prototyping, system supplier.

CNC turning & milling

Services We are your efficient partner for the production of precision turned parts. We see every job as a partnership on time. From the first inquiry to the final rotational part, we bring our years of experience, our expertise and our creativity with. The decisive factor is the high level of qualifications and the outstanding commitment of our employees. Of course, we are certified according to DIN EN ISO 9001:2000. Our product focus is in the machining of round / square / hexagon / profile and tube material: * Stainless steel (1.4104, 1.4305 and 1.4301) * Cutting steel * Brass alloys of all kinds * Copper alloys * Aluminum * Plastics * Titanium and other machinable materials We manufacture turned parts at its finest. Individual and precise. Spectrum High investment in modern machinery, constant run control, continuous training of our employees and the hundred percent testing in our own laboratory to guarantee only the highest quality parts. Do you want special solutions you need assistance in the development of parts required or necessary, a surface treatment? By whatever tasks you require us to customer-oriented, partnership

The Würth Industrie Service GmbH & Co. KG is responsible for delivery of the industrial sector within the Würth Group. Since 2002, the company in the Swiss market is responsible for the management of industrial customers.

DANNIK Ltd. is a metal-working company, founded in 1995 in the town of Kazanlak, Bulgaria. The main activity of the company is the production of turned and milled parts for the machine-building industry. The company is a subcontractor of machine elements for Pneumatika Serta, MADARA, M+S Hydraulic and other Bulgarian and foreign companies. DANNIK Ltd. Is ISO 9001:2008 certified by Bureau Veritas. Throughout the years DANNIK Ltd has proved to be a correct and reliable partner, offering high-quality products at reasonable price and by the time fixed in the contract. Our main goal is to achieve a dynamic growth including enlargement of the final production, application of new high technologies and modern machines, constantly improving the quality and the variety of our products as well as expanding our market positions. Our team of experienced professionals is occupied with metal working more than 20 years. In our production we follow precisely the costumers’ drawings using our modern production equipment: HAAS VF-4SS Super-Speed Vertical Machining Center (2016) Travels: X Axis – 1270 mm Y Axis - 508 mm Z Axis - 635 mm Table: Length - 1321 mm / Width - 457 mm HAAS VF-2SS Super-Speed Vertical Machining Center (2015) Travels: X Axis – 762 mm Y Axis - 406 mm Z Axis - 508 mm A Axis - 203 mm Table: Length - 914 mm / Width - 356 mm MAZAK QUICK TURN SMART 100 /Mazatrol Matrix (2014) · Max. finished turning diameter without barfeeding – Ø280 mm · Max. finished turning diameter with barfeeding – Ø51 mm · Max. finished turning length – 309 mm MAZAK QUICK TURN SMART 200 /Mazatrol Matrix (2013) · Max. finished turning diameter without barfeeding – Ø350 mm · Max. finished turning diameter with barfeeding – Ø65 mm · Max. finished turning length – 541 mm MAZAK QUICK TURN SMART 200 /Mazatrol Matrix (2012) · Max. finished turning diameter without barfeeding – Ø350 mm · Max. finished turning diameter with barfeeding – Ø65 mm · Max. finished turning length – 541 mm 1 MAZAK QUICK TURN NEXUS 200IIM /Mazatrol Matrix (2009) · Max. finished turning diameter without barfeeding – Ø380 mm · Max. finished turning diameter with barfeeding – Ø65 mm · Max. finished turning length – 538 mm · range of milling/ drilling 20 mm, threading М12х2 6 CNC machines СT 161/ ISO Component · Max. finished working diameter - Ø250 mm · Max. finished working length – 350 mm To guarantee the quality of the production we control it with CMM ABERLINK with CNC control Axiom (2016)

The Würth Industrie Service GmbH & Co. KG is responsible for delivery of the industrial sector within the Würth Group. Since 2002, the company in the Swiss market is responsible for the management of industrial customers.

The vista Steel Service GmbH is a young, independent and innovative company that specializes in the distribution and processing of flat steel products. From our centrally located office in Crawinkel (Thuringia) we supply our customers at home and abroad with high-quality steel sheet and strip from leading EU steel producers. The vista Steel Service GmbH offers its partners a wide range of cold-rolled, hot-rolled and coated steel sheet and strip in various grades, thicknesses and dimensions. One of our top goals is to meet the high demands of our customers optimally. Starting with the individual counseling and development, material selection through to implementation and production, we therefore always work with the highest precision. With customized concepts and solutions - tailored to your individual requirements. The only way we can guarantee the highest level of quality and efficiency throughout the entire order fulfillment - both in the work processes as well as the final product. This claim is the one secured by our quality management system that has been certified by TÜV Rheinland with ISO 9001. Secondly, through ongoing process improvements that optimize the productivity and efficiency of our work processes and systems consistently. With a supply share of over 70 percent of the automotive industry and its suppliers, we prove that we meet the high standards of quality and production standards of this industry.

In the field of vacuum technology and gripping systems is the FIPA GmbH is an internationally operating company, which specializes in the development and distribution of quality products and innovative system solutions for material flow. The FIPA GmbH with headquarters in Ismaning / Munich was founded in 1985 and is characterized by sustained growth. Current and comprehensive information at www.fipa.com.

Trend Machinery, We are a company engaged in manufacturing welded, high temperature kilns and industrial designs make serving in Turkey. Our Machine Track: " - Laser Cutting Machine: Latest technology for precise and fast cutting processes. - Press Brake: High precision and variety in metal plate bending processes. - Powder Coating Shop: Aesthetic and durable surface coating options. - Machining: Large capacity for the production of detailed and complex parts. - Welding room: Strong and robust joining solutions. - Quality Control: Meticulous checks to ensure that our products meet the highest quality standards.

The company was founded in 2006 and is privately owned. The company’s headquarters is located in Pozega, Croatia. The company currently employs a small number of people with high knowledge and willingness to work and progress the company. Auto Tehnika is a company that deals with metal processing with the help of the most modern CNC machines that have been carefully programmed and tested several times in order to obtain absolute product perfection. Our goal is to make our Customers satisfied with our high quailty and fast delevery parts.

Our specialization is the production and integration of equipment for product conveying, handling and packing. We strive to release the customer from monotonous, tedious work, making product conveying and packaging processes faster, better and more environmentally friendly. Protecting the product and reducing costs associated with its production and packaging. Our customers are food manufacturing, agriculture, logistics, chemistry, cosmetics, consumer goods, catering and other business sectors.

We are a company build by a team that has more than 10 years experience. Along the way we learned the common problems of the industries and we wanted to offer to our customer an easy experience. Even that in this company we are only a few, we collaborate with tens of people. Our main focus is to find the right company for each need.

We are your competent partner for metal products. Our many years of experience, extensive range of products and continuous participation in new developments in metal technology create expertise from which you benefit. Companies all over Europe now supply standard products or special parts, which are manufactured individually and according to your specifications.

precision mechanical processing, rectification, 3d milling, 3d printing.

Competence and reliability for complex turned parts, milled parts and assemblies — that is what TIEDTKE stands for Special machines since 1988. On behalf of customers, we manufacture individual parts, small and medium-sized series from all steels, non-ferrous metals and machinable plastics. Short-term solutions also include about our strengths, such as flexibility in order processing. Our range of services includes complete processing on CNC turn-milling centers with the production of high-quality individual parts, small and medium-sized series. At the customer's request, we take over the complete assembly production, including assembly work. Ask us: We would be happy to make you a specific offer for your request. We are looking forward to your call! Horst Tiedtke ceo