We produce parts with complicated geometry for various industries. Single to serie production. Moulds , dies , vorrichtungs.

-

We are an engineering company based in Bucharest. We provide complete solutions within metal cutting field for more than 200 customers since 2008. Our experience and high technical background in the field combined with the best products on the market available in matters of cutting tools, clamping fixtures perfectly shaped by the most powerful CAM software on the market made our company one of very few able to provide complete technological solutions.  Utilizing cutting-edge milling technology, our facility can fabricate precision components from an array of materials, including steel, aluminium, plastics, stainless steel, brass, Inconel, copper, titanium, magnesium, and zinc alloys.

Steel appliances and Maschienbau according to DIN18800 part 7 (DIN EN 1090 in preparation) up to 5t Production according to Pressure Equipment Directive 97/236/EG module F and G, as ADW2000 HP0 HP100R Restamping certificate of materials by 3.1 Certification according to DIN ISO 9001:2008 is carried out at the time, we are in the audits. System components for producing the heat exchangers, engines, and industrial Kühlerbau Hertsellung of machined base frame and components for high-pressure pumps and motors CNC Processing on machining centers and boring mills, and CNC Rapid Radial Drilling Machines CNC sawing up to 400x310mm miter bandsaw CNC water-jet cuts to 3000x2000mm CNC bending work to trump Biegautomat tarnishing 5170 to 3100mm We manufacture in the 4th since about 75 years Generation for industry and craft according to customer specifications. Main focus of steel structures and components with subsequent machining. Our coating operations allow previous or subsequent coatings of the components in different variants (Electroplated Zinc plated, hot dip galvanized, primed, Lakiert, Powder coated or rilsanated).

The company Bartek CNC s.r.o. is based on a long experience in precision machinery production extending up to 1998, and since that year the company became a trade. The core element of our production is custom manufacturing of a parts and assemblies for any industry. Throughout the whole time of production, the firm has been producing precise and high-quality parts in compliance with customer’s satisfaction. The basic production technologies are: • CNC-milling • turning • drilling • material cutting • assembly

Modern technology + highly qualified personnel We are a powerful and flexible partner for the production of turning, milling and Cleans parts in series production. We manufacture to 2,800 m² technically sophisticated products with approximately 60 highly modern CNC machine tools from all Zerspanungsbereichen. Quality assurance system First-class quality has been in the production of AGA Machining GmbH priority. The work processes in our company based on the value-adding processes. These are fused together by the staff of manufacture within the meaning of the operator inspection and quality assurance. Quality as the foundation Quality is the basis of all activities at the AGA machining Gera GmbH. Every employee has to make a significant contribution to quality. The quality policy is the basis for work of every employee at AGA. Quality in national competition To prove the competitiveness of AGA obtaining the quality certificate 16949 stated goal of the company is TS. NULL-defect quality NULL-defect quality in all processes, products and services is essential to secure the future. To the total satisfaction of customers is our ultimate goal. This is achieved by error-free products and services, punctuality and by competent and friendly cooperation with our clients' staff. Continuous improvement means that every employee fully aware of the quality of his individual work as well as the active contribution to the continuous improvement of the quality of AGA processes - products and services. Quality by thinking and acting To achieve the quality objectives, the skills of all employees for customer and quality oriented thinking and action must be constantly developed and trained. Quality through Leadership The managers are an example for your employees. They must formulate clear, achievable objectives and support the employees in the achievement of these goals.The managers are responsible for the fulfillment of these goals. From design to finished product Through years of experience as a supplier to the automotive industry, we offer our customers the complete production of their products. We are partners with the pros and development and give you competent with technical know how, new manufacturing processes and over 100 qualified employees to the side. The creation of individual concepts in the field of machining is one of our strengths. We are your partner - already in the development phase.

NSP Mechanical Engineering With 61 years of experience, Nesan Metal is a reliable business partner in metal cutting, forming, and joining its powerful machinery and trained staff. In addition to the service it provides to dozens of domestic industrial companies, with its unconditional customer satisfaction principle and manufacturing discipline, our company has been exporting to Germany, the Netherlands, Austria, France, and Italy since 1995. The corporate relations that we have established for many years and satisfaction of our customers are among the reasons for our company to do business and be preferred. Providing the best product to our customers as we promised is the principle of our company from the past and will be one of the reasons for our existence in the future. Nesan Metal has started branding studies for specific products to create added value for its sector and country. The "NSP Mechanical Engineering" marketing activities are carried out in the country and abroad.

We are engaged in the manufacture of steel structures, machines and equipment in the automotive, wire, energy and water industries. Here we can offer complete assemblies. Sheet metal processing of 0.5mm burn bending and painting. Experience from previous years has shown that cooperative work of all kinds is necessary. We are able to offer the machining of horizontal milling machines, carousel, CNC machines, turning, grinding  Steel, aluminum, stainless steel, cast iron, Inconel and other specialties such as POM plastics etc.  We tend to cooperate with smaller companies in piece production. In our portfolio we have about 25 long-term partners from CZ and SK. We do not oppose the series here, but also have certain possibilities of assignment. We propose a complete solution for the possible production of parts. We are also able to offer design solutions with external design offices. Quality, delivery dates, price are a priority for us. Everything should be correct as we say. Drawing in the requests PDF, DWG, CATIA5, ZVD3, STL, STP are without problems. We look forward to receiving your inquiries.

Cutting to perfection - in the heart of Germany You are looking for a competent and highly modern partner for the production of machine parts, automotive components, tooling patterns or other components for your products? The NOTHNAGEL technology has specialized as a contract manufacturer for demanding and short-terminated metal parts. Special materials such as titanium and titanium alloys, Ampcolegierungen, high-strength stainless steels can be made accurately. We manufacture on state of the art and new machining centers and lathes Mazak and Makino. Maximum turning diameter of 380mm and milled parts with dimensions 1050x550x510mm can be edited. Fitting tolerances in it5 are process reliability can also be produced for individual parts. Due to highly skilled professionals and use of modern tools we can offer you as best quality at reasonable prices. Also, we provide development, installation, and design of complex assemblies. Through years of experience in the operation of a tool-and a plastic manufacturing, we also offer the complete processing of Spritzgießaufträgen. Starting from design to implementation in a complex, viable mold. By using a Hochgenauigkeitsbearbeitunszentrums Makino Japan, save yourself extra work, such as polishing of high-gloss surfaces. Are possible roughness of Ra 0.2 microns in at HRC64 high precision contours and dimensional deviations in the micrometer range. The maximum form size is 1050x550x450mm. Production of lathes and milling precision parts, 3D machining, grinding work Plastics Processing

Quality prevails With this knowledge, we have been manufacturing high-precision mechanical engineering elements for customers in a wide variety of industries - individual components, assemblies and special machines, with which we have earned an excellent reputation both locally and globally. The best for everyone We would also be happy to convince you with our services. Flexible, dialog-oriented and on schedule, we weld, drill, mill and turn even the largest and heaviest parts according to individual specifications. No matter whether individually or in series, whether for small customers or corporations. Thanks to modern CNC machinery, a central tool management system, welding equipment up to 25 tons, well-trained and trained specialists and TÜV-certified quality management, we can fulfill almost every wish. Precision "Made in Germany" Our production is divided into two areas. In steel construction, a wide variety of metal structures are created under the hands of experienced locksmiths and welders.We complete them in machining: Here, competent machining technicians mill, drill and turn, e.g. bearing seats for gearboxes or complete underwater housings for propellers - always in the highest precision class. We do all the work ourselves (if desired, right up to the completion of entire assemblies); outsourcing is out of the question for us: the risk of quality fluctuations would be too great. We do what you need Your drawings and plans are decisive for us. But you can be sure that every step is carried out with the critical expertise of a mechanical engineer. Our strength is to think about the later use of the component during production so that it does its job perfectly. If you wish, we can start with this before production: Together with you, we will check your designs, make recommendations and also like to develop components yourself for the application you are planning.

Metalkor’s core competence is plate conformation, especially laser cutting. Metalkor was founded in 1999 and is ISO 9001:2015 certified. Around 35 employees work for the company in the Júndiz Business Park in Vitoria-Gasteiz in northern Spain. We offer contract manufacturing, from individual parts to large series. Thanks to our experienced staff and modern machinery, we can offer our customers integrated solutions in the following sheet metal working processes: - Laser cutting and punching in one operation - Shearing and bending CNC - NC cutting and pressing - MIG and TIG welding. - Robotic and precision welding In addition, we also take care of the final processing of the metal parts: - Galvanised, zinc plated, brown burnished, tempered and painted (epoxy or liquid), etc. If necessary, we organise the transport of the products to our customers. Further information can be found at: www.lasermetalkor.com

For over 60 years we have manufactured plastic parts. As a partner, the precisely fulfill your requirements according to your 3D data, samples or drawings. We manufacture with modern machinery plastic injection tools, technical plastic parts and components and multi-component were for certified to the quality management system ISO 9001-2008. We process the injection molding process not only all common thermoplastics such as engineering plastics, but also high-temperature and bulk plastics to 40 computer-controlled, process-controlled injection molding machines up to a weight of approximately 1400 g. We offer you / our core competencies are: - injection molding - Mould - Assembly - Assembly - Labeling / marking - Pad printing (4 colors) - Plate Welding - Ultrasonic welding - Laser welding - Welding - Parts processing - Parts machining: grinding, wire cutting, EDM, CNC turning, milling Translation by Google Translate

Our company, Meccanica Marcato, was born in 1996 and is specialized in precision mechanical workings. We operate in Camposampiero (PD) in a production site of 1200 m2, in which 20 people, considering operators, technical and administrative staff, work. Over the years, we have been able to reach high standards of processing that have led us to work for internationally renowned companies in the various sectors listed below. Our production department is equipped with 18 high-tech machines, all with CNC machining centers up to 6 controlled axes and milling / turning centers up to 11 controlled axes. We have an integrated production-management and quality-control system TESAR: all machines are networked to 2 control terminals inside the industrial premises. Firstly, they control the production, by carrying out its daily analysis, pointing out any machine pause, etc. Secondly, they check the quality by means of control instruments in serial connection, micrometers, calibres, altimeter comparators as well as data analysis, X-R control cards capability, certificates of compliance, etc. We have, in addition to various instruments for quality control, a three-dimensional continuous scanning measuring machine DEA GLOBAL PERFORMANCE We meet the requirements of the industry 4.0.

The company Roland Müller CNC-Fertigungstechnik e.K. (CNC manufacturing technology ) is a medium-sized company in the Southern Thuringia. We are operating in the market since more than 20 years. Our assignment comprises jig- and special machine manufacturing as well as production of precision-, milling- and turning parts/tools. We provide well-known clients at home and abroad from different industries. Our main strength are both our best quality and flexible delivery time. Besides various VA steel we also treat aluminium, titanium, brass and plastics as well as other materials. We produce according to the rules of Quality Management, like DIN EN ISO 9001:2000. For more information please see have a look at our website: www.mueller-cnc.com.

The production facilities of our new plant occupy 15,000 square meters, which allows us to provide almost all types of subcontractor services in the fields of mechanical engineering and metalworking. We work with ferrous, stainless steel and aluminum, both at the procurement and welding stages, and for processing via CNC machines. With years of experience in metal parts manufacturing, our trained professionals are ready to help you implement your production ideas into life and fulfill your business needs. Following the highest quality standards of production, we stay in line with all the necessary production certificates (EN 1090-2, ISO 9001:2015, ISO 3834-2) and quality management systems (such as Monitor ERP).

Located at the gates of Wolfsburg, our 80 or so employees bring almost 20 years of experience in development and production to the market. Initially only specializing in the area of gearbox development, with our broad-based production we are able to meet almost all requirements, from centering pins to complete gearboxes. Thanks to modern measurement technology, we can also measure and document complex components reliably and with high repeat accuracy; EMPBs and cover sheet samples are possible according to customer specifications. In addition to the services in the field of production, we also offer development support, very happy in the field of electromobility. In addition, we offer the opportunity to test your entire product on our test benches according to your specifications or to convert or equip your vehicle in our prototype-safe workshop. From contract manufacturing of individual parts to the implementation of entire projects, we are your contact!

Your specialized company for steel construction, jig construction, structural engineering and Stalsonderbau Singold Stahlbau GmbH combines the experience of a third-generation craftsman with the production and design possibilities of a modern service provider. Thanks to the know-how of our experienced specialists and the modern operating equipment, we offer a comprehensive range of special steel work, in addition to classic steel constructions and the high-quality processing of stainless steel. Our company relies on innovative technologies when processing its orders. By using a KUKA welding robot, we can meet factory specifications exactly and on time. In addition, we have a HEDELIUS machining center and high-quality DEMMELER welding tables to make our components precisely tailored. A hall crane with a 10 ton lifting capacity and a BEHRINGER band saw enable us to cut and process large steel beams on an 800 m² production area. Regular training and further education of our motivated employees, as well as certifications according to European standard, extend our fields of competence.

maweco - at a glance Quality Made in Europe: Our production sites in Germany and Romania. We are problem solver and partner for the production of ready to install, mechanically processed welded assemblies with surface treatment for commercial vehicles Construction Agriculture and agriculture Loaders special applications Our strength lies in the production of small to medium lot sizes.

Compass operates in the precision engineering sector with a skilled staff of 20 and an 2500 mq production plant. Our comprehensive range of traditional and CNC machinery enables us to produce mechanical parts for all types of application (including photography, electronics, furnishings and textiles) using every possible material. We specialise in working with aluminium and stainless steel. An in-house metalworking department enables us to produce small soldered parts which then go on to the finishing stage. All our tools and special parts are produced to the customer's specifications. Heat and surface treatments are handled externally by carefully selected suppliers. The production process is managed using the latest information technology. Our company is in a position to complete orders quickly, in quantities which range from the single part to mass production runs.