Specializing in cutting and CNC machining of precision parts from a diameter of 4 to 65mm in most metals, our business since 75 years plusd e meets the expectations of the automotive industries and implementing a fluid from pre-series to mass production.

In milling, we are specially equipped for micro-parts throughout the material is available, mainly aluminum, brass and plastic parts series. We manufacture micro-and small parts of millimeter cross-section up to a size of 100 x 150mm. Drilled and tapped with 0.2 mm are standard for us. In the team, we manufacture and assemble for you assemblies, components and complete systems from a variety of material is available and the many different areas. We are fully equipped, like eg for the machining of precision tubes. A comprehensive machinery to finishing machines available to us for the polish available. Our service goes beyond that, however, and we take care of the entire process from how zBOberflächenbearbeitung (hardening, anodizing, etc) Very much experience we have developed in and finished by micro-instruments and conventional surgical instruments. We manufacture instruments in this case from the verse. Areas in all the usual tools steels and in titanium.

The company Jakob Schäfer was in Kaiserslautern, Mühlstr in 1926. 9 of machinist - champion Jacob Schaefer founded. Mr. Jacob Schaefer worked in the tool room Pfaff , where he took his master's certificate in 1919. First founded Mr. Shepherd has entered the bicycle mechanic Guild, and worked as a guild master. It then bicycles and motorcycles were sold and repaired. Before the second World War II was furnished a cylinder grinding and turning shop. 1944 destroyed a bomb attack the entire operation including residential house and a shop. After the war, Mr. Schaefer from the ruins of an emergency shelter built with a small workshop. Companies - with the currency reform, the structure of today's "Shepherd" began. House and workshop were created again. In parallel with the vehicle sales and the turning shop was built, so that in 1950 the first jacks, the Federal Railroad Central Office, could be sold in Speyer at the time. The two operating branches vehicle and turned parts production had increased to 1955 so that the existing business premises were no longer sufficient. Therefore, in 1955 the purchase of a hitherto community-owned 10,000 square meters of grounds with a building of 300 square meters floor area and 200 sqm floor. The turning shop was moved to Weilerbach and managed separately from the vehicle sale as KG. As a complementary acted Mr. Jacob Schaefer, limited partners were Mr. and Mrs. Hedy Werner Hilbrath Hilbrath. Since 01.01.2001 is also Jutta scouring manager and responsible for business administration and the personnel office. As of 01.01.1982 the sole proprietorship was changed into a limited liability company. Managing partner was initially Dipl.-Ing. Werner Hilbrath. Since 01.01.1995 Mr. Mechanical engineer Rüdiger scouring held this position. Shareholders are Elke Palm, born Hilbrath and Mrs. Jutta Scheuer, bornHilbrath. In 1990 the office building was enlarged by 100 square meters. After the construction of an additional hall in 1998 the operation are around 2,500 square meters of covered factory area available. Currently, the annual turnover of 4.5 million euros at an average of 45 employees. The GL is based on German quality and the production does not outsource to neighboring countries. The rest of the year, the company under the slogan "Quality ensures the future"

Manufacture of Zerspanteilen (turning / milling) of plastics and metals to customer.

Thin sheet metal at its best - with everything that goes with it

The company Heinz Zenker GmbbH specializes in sheet metal processing and manufacturing of individual parts, prototypes, small series to mass production from coil everything. Since we also have a own tool design and manufacture all our tools themselves, it helps us naturally to queries of any kind to respond quickly and deliver. We have a full plate range, press brakes, CNC milling machines, CNC machining centers, laser (stainless steel up to 12mm, steel up to 15mm), a 3D laser also part of the scope, various presses, punching nipple machines, EDM machines, CNC lathes, and of course beyond the normal mechanical machines. In addition, our particular strengths include a highly qualified team sweat. We weld steel, stainless steel, manganese, copper, aluminum. In addition, we are contract coating for diamond-like carbon hard coatings (type: aC: H: X) and we would like to introduce as a supplier to your company. The program includes: wear-resistant coating, corrosion protection coating, overlays, numerous design layers and modified layers with combined properties (multi-layer coating), all based on diamond-like carbon films (type: aC: H: X). As an example of the multi-layer layer to be mentioned is our latest development, this has been modified specifically for applications in injection molding. It combines high temperature resistance with consistent wear protection and maximum corrosion resistance (as chemically inert) with a unique anti-stick effect and very low friction coefficient. All this at a very attractive appearance. Possible locations we recommend: ejector, extruders, torpedoes, sprue channels, cavities, etc. ..

To produce quality, economical and fast solutions Continuously improve all our processes To place quality culture as a continuous education Develop with suppliers Prioritize lnnovation Emphasis on occupational health and safety Respect and protect the environment Being aware of our social responsibilities

Our core competence is the development, production and international distribution of plastic parts manufactured by the injection molding and rotation process.

A multidisciplinary, skilled and enthusiastic team of people that strives for the best solution for each project, covering the complete cycle of composite design and manufacturing in different challenging markets such as space, aeronautics, equipment goods or automotive

Morawetz GmbH is an innovative company that specializes in the high-precision manufacturing of parts and components using computer-aided numerical control (CNC). With the latest machines and technologies, we offer tailor-made solutions for various industries. Our dedicated team of experts ensures the highest quality and reliability in every manufacturing process. By continuously investing in the latest technologies and training our employees, we ensure that we are always at the forefront of technological developments. We attach great importance to customer proximity and individual advice. Together with our customers, we develop innovative manufacturing solutions that offer maximum benefit and efficiency. Our services range from prototype development to small series to mass production. Morawetz Technik GmbH stands for precision, quality and sustainable production methods. Rely on our expertise and see how we turn your ideas into reality.

The company started in 1998 with a shop dedicated to small moulds for consumers market. In 2006, the addition of 2 CNC milling centers along with the introduction in the automotive market, created the capacity for higher production rates and increased precision parts. Our major market is now the automotive industry, after 20 years of experience allied with several high precision equipments, which allow us to respond to any of our client challenges.

Since our founding in 2012, we have been a valued partner of many well-known regional companies. These include companies for the lighting and furniture industry, special/mechanical engineering, electrical industry, medical technology, and special vehicles.

EF Tools GmbH was founded by Eyup Findik and his two sons. Eyup Findik himself was a production manager for 20 years and worked as managing director for the last 5 years - before the separation at Stanztech GmbH. Onur and Ozan Findik both have the final apprenticeship examination - Onur also has the master's examination. Together with their father Eyup, they are responsible for the production of the parts. The commercial process is carried out by Aylin and Gülten Findik. We also work with our partners in the region, with the region and largely for the region. This is sustainable, environmentally friendly and promotes the location.

Your experienced partner for laser welding, laser engraving, Mobile laser welding and tool repairs of all types PML was founded in March 2002 based on existing experience derived from extensive laser testing at DMF-Werkzeugbau GmbH and with a high level of commitment. The market accepted the “laser welding” service without reservation and helped us achieve a strategic advantage over competitors. 1 2 3 4 5 6 7 8 9 In order to be able to maintain the high technical level of our work, we created our own operating rooms in 2005 with a size of around 350 square meters. We are now able to process tools up to a weight of 10 t. In addition to laser welding and engraving on 3 stationary and 3 mobile devices, we can offer our customer base, which has now grown to over 200 clients based across Germany, as well as follow-up work in the areas of milling, turning, eroding and touching up in cooperation with DMF.

Our company carries out precise and serial processing of cast, forged aluminum and steel parts in accordance with the technical specifications required by the customer. Cast, forged aluminum and steel raw materials are obtained from our reliable domestic or, if necessary, foreign suppliers, with whom we have worked for years, in accordance with the technical specifications provided by our customers. The processing takes place in our company and the products are then delivered to our customers in the packaging required by the customer.

The best German-French experts at your side With our subsidiary Strategy & Action International, we have also been supporting German companies that want to expand their activities to the French market for almost 30 years. Our bicultural team provides expertise to French and German companies that want to develop in their respective neighboring markets. Strategic advice, relocation, business development, recruitment, external growth: our team is happy to advise and support you!

TEE Group is a company that inherits FIRE Ltd., founded in 2008 with 100% private capital. We have a huge market share both in Bulgaria and around the world. Our concept of success is entirely related to offering quality services tailored to the requirements of users. We know that our clients are successful and dynamic companies that want to receive their order as quickly as possible, but also precisely executed and at reasonable prices - precisely because we offer this complex of services, our company is becoming one of the most successful in the industry. We partner with leaders in almost all European countries such as Austria, France, the Netherlands and Germany. They all have the same values ​​as ours, which is why we can enjoy long-term cooperation with them. We are mainly engaged in metalworking and construction of stable and high-quality metal structures, as well as their maintenance and repair. Inspired by our satisfied customers and the successes we have achieved with our creativity and motivation, today TEE Group is also engaged in the production of parts, maintenance and production of mining and quarrying equipment, as well as assembly/disassembly of large-sized facilities. Our base, located in the Industrial Park "Optikoelectron", Panagyurishte, is one of the most modern and advanced in the entire country. We have an area of ​​​​over 4000 square meters, which allows us to have any equipment to fulfill all the requirements and needs of our customers in the most precise way possible.

ZİRVEM HAVACILIK was established on October 27, 2022, and provides machining services in its 400 m² indoor production facility. Our company carries out manufacturing activities for the defense and aerospace industries with an experienced team. By adhering to high quality standards, we prioritize customer satisfaction and aim to be a reliable solution partner in national and international projects.

CNC-Technik M.P. Müller is a highly specialized CNC manufacturing company with many years of experience in the precise processing of metal and plastic parts. Our modern machinery includes two powerful CNC milling machines and four high-precision CNC lathes, with which we produce both individual parts and series production of consistently high quality. Our team consists of experienced specialists who have worked in CNC processing for many years and use their know-how with the utmost care and technical understanding. Through this combination of modern technology and human expertise, we offer our customers tailor-made solutions, short delivery times and maximum precision — from prototype to series production.