Mikro - Met Co. Ltd Grzegorz Kłosowski was established In 1983 in the town of Brodnica Poland. Our activity concentrates mainly on the mechanical engineering From 1983 we implement the strategy of dynamic development of production. Currently, Mikro Met Co. Ltd operates on both Polish and foreign markets. Using the modern CNC machine tools, the Company manufactures mainly elements in the small and mid-lot production series. Thanks to the experience of our staff and the concentration on the Client's needs, the solutions we offer are of the highest quality. The stock of machine tools makes it possible to perform precise machining acc. to the delivered documentation. Stock of machine tools Within the services offered we specialize In manufacture of moulds and providing high-quality maching. Manufacturing is carried out on the basis of both our own documentation and technology and the documentation provided by clients. The high quality of our products has been achieved thanks to application of modern tools of leading companies and owing to the modern stock of machine tools. The products are continuously inspected from the moment of material purchase until the products has been finished. Currently, we implemented the ISD 9001-2000 Quality Management System. The quality inspection system and the processing instructions and procedures we have been applying till now, ensure the high quality of our services.

Edr Fittings boasts over 20 years of experience. EDR Fittings is the European leader in the outsourced production of micro-castings and machining. Our widespread presence on the Asian territory allows us to offer an optimal service for every type of requirement on castings, machining, assemblies, pneumatics and stainless steel fittings. Specifically, the technologies we use are: - Cast - Lost wax castings - Cast iron castings - Lost Foam - Die casting - Investment Casting - Extrusions - Hot forging - Plastic molding injection Our company guarantees the control and management of the orders by following step by step all the phases agreed with the client, also offering a customized 2D / 3D design service and stress analysis. The strength is the aggregation with productive partners of the Asian market, inventors for many years of this casting technique, with which we can guarantee quality that will surely meet your needs and at prices that in most cases make it possible to amortize the mold costs already from the first production lots. All our "partners" have been subjected to thorough audits and adhere strictly to our Quality agreement as required by the ISO 9001 DNV and EPD (Environmental Product Declaration) certification procedures; furthermore the materials produced are tested and verified by our internal metrological laboratory which includes CMM, durometer, roughness tester and various bore gauges. Our goal is to always be present both with our customers and suppliers, giving immediate answers and an indispensable direct contact to achieve the result in a short time.

At Arwo Stiftung Wettingen Mechanics, we have a wide range of machinery with high safety standards. Together with specialists, our employees with disabilities carry out extensive, high-quality orders from the moment they are signed. It doesn't matter whether you deliver the raw material to us or whether we should procure it for you. Of course, we are also happy to carry out partial mechanical work. We process non-ferrous and light metals, steel, stainless steel and plastics. We work with several specialized companies for the finishing of workpieces. Our strengths are series work starting at 100 pieces.

Miba sintered components are high-precision, high-strength parts produced using special processing technology. We focus on increasing efficiency, reducing weight, improving shifting comfort, optimizing NVH, and protecting the environment. As an international solutions-oriented and development partner we work closely together with our customers in optimizing sintered components. https://www.miba.com/en/industries/industrial

With a passion for mechanical and plant engineering Reliable and customized solutions for special machine construction since 1986. In the field of contract manufacturing or contract manufacturing and part or final assembly of components and assemblies, we have been able to develop into an important company of this type for a wide variety of industries.

Reisinger Modellbau GmbH * We are a strong partner in the production model. * We produce foundry models of all kinds * We manufacture prototypes - view parts - functional parts made of plastic and metal from a quantity of 1 * We work for you castings of aluminum alloys. * We design and compute on high-end CAD systems. * We use the most modern 3-5 axis milling machines. Our most important goal is a satisfied customer. Therefore, punctuality - quality - low cost. We are certified according to DIN EN ISO 2001 We attach great importance to a good operating and working environment, job security, and a competent occupational safety and health in collaboration with the Wood Trade Association and the Occupational Safety and Health Administration. Furthermore is our one constant development and training of our employees in the foreground.

h2> The Company /h2> Our modern equipment machinery factory is located north of the Wiehengebirge and with its incorporated team of staff for 30 years worked for the press and mechanical engineering. In addition to the presses, the range precision manufacturing has greatly evolved and is now an essential part of our company. For this area, we also accept pay orders. h2> Contract Manufacturing /h2> We hereby present to you our new expanded production program, a result of years of experience and development that qualifies us as a leading manufacturer. Our machines are precision presses from 10 kN to 300 kN load capacity that can be used in all areas of industry and trade. Shaping - Stability - precision are the main features that run through the program. Hand punches, pneumatic punching, hydraulic punching, punching heads, conversion kits for hand dancing, which can be changed as needed to pneumatic operation, tools and pneumatic accessories belong to our regular program. Work efficiently and thus more economical with deglutition presses and punches. Cheap - at short notice - Work efficiently and thus more economical with deglutition presses and punches. Cheap - at short notice -

We are a young, small company engaged in machining metals and other materials. We are located in Spodnje Gorje, Slovenia, where we currently rent 200m2 of working space. We have many years of experience in the field of cnc processing, before we decided to work independently in this field. We currently have two cnc milling machines, a grinding machine, a coordinate measuring machine, immersion erosion, and some classic machining machines. In collaboration with our colleagues, we also have the option of: CNC turning, wire erosion, 5 axis cnc milling.

Our company Frasal CNC Technik has existed since 2006. We manufacture individual parts as well as series parts and small series from different materials. With our 3-axis machines we offer you professional and excellent dimensional accuracy and quality. Our company is also characterized by our high-performance production, quality and fast delivery. Are you interested in working with us? Then write us an e-mail with your request and we will offer you our top offers. Many greetings. Frasal CNC technology.

CNC POWER d.o.o. Prijedor is a company that aims to become one of the modern companies for processing materials using milling, turning and grinding technologies on CNC machines. We work with new equipment and modern machines, offering an advantage when machining metals and making metal elements.

The Lamep Srl company was founded in 2003 by two partners with proven hands-on experience in mechanical engineering, who in that same year purchased a small machine shop. Through the constant technological renewal of its machines and organisation, Lamep can respond practically and flexibly to the needs of its customers operating in various industries, mainly energy, special machinery and systems.

The Rampf GmbH was founded in 1967 in the beautiful Rettenbach market in the Lower Allgäu and was modernized constantly over the years. A continuous development in quality and processing possibilities unites our company still with customers from the very beginning, as were new customers from industry and trade to be won. The successful cooperation with our customers is very important to us. Our focus is in the manufacture of complex components up to series parts in the fields of CNC machining, CNC turning and CNC milling. For us there is a modern CNC machinery with lathes and milling machines available and guarantees the highest quality standards.

Consulting, development and production of means of production, machines and components from engineering to manufacturing detail to the complete system, we assume responsibility for the project. Sheet metal working: Your manufacturer of precision parts, assemblies, and partner for complex manufacturing solutions in sheet metal processing. The flexibility of the plants, together with the creativity of professionals enables new solutions. Manufacturing noble parts: Design and fabrication of components, series and pre-finished assemblies including post-treatment, logistics and functional test. Sharpening and Rental Service: The sharpening of ABB is your guarantee for cutting tools of the highest quality. Both the sharpening of standard and special tools, as well as in the procurement of new tools you need to make any compromises. Our rental services for measuring instruments, standard and special tools offers a wide selection at very attractive terms.It is much more economical for you to rent from us than to buy rare and short-run and manage resources. These include in particular oversized tools and measuring equipment that you can find and hire. Heat treatment: The services offered by the heat treatment comprises the traditional methods such as annealing, hardening, tempering in an open atmosphere, an inert gas or vacuum. In addition, we offer special techniques such as nitrocarburization, an environmentally friendly surface hardening process, with impressive characteristics, as well as the necessary pre-and post-treatments. A unique service we offer regarding expertise and infrastructure in the tempering of aluminum alloys. Translation by Google Translate

Vinegar technology FRINGS vinegar technology has been a market leader in the production of biological food vinegar for more than a century. About 60 % of the world vinegar production is produced by FRINGS systems. Extensive R&D activities have enabled FRINGS to set new standards in the design and construction of vinegar production plants. Chemical technology Core components and applications for gas-liquid reactions. FRINGS rotor-stator aeration turbines are the core component of our high-performance reactor units for gas/liquid reaction technology used in the chemical industry, for fine chemicals production and the pharmaceutical industry. Yeast technology FRINGS specializes in those areas of special yeast fermentations that require particular attention to plant-specific, sterile or procedural aspects. Immersible aerators FRINGS's range of tried-and-tested immersible aerators (under the license of ABS) for industrial waste water treatment includes the immersible TA and TAK aerators, of which more than 10,000 units have been sold worldwide.

We are the company who is focused on international quality standards in the surface treatment and machine processing. We are represented in electrical and automotive industry. Production and service of company is primary focused on soldering tips, different metal sets (elements) and decorative parts of tailpipes. To assure competitivness of our products, we constantly make new research and improving the production process, as well as education of our employees. It is especially obvious in the segment of surface treatment- galvanization, where from 2010, we are co- owner for the patent in the mode of processing the soldering tips. Commitment of all employees and team work, every day confirm our vision that ZAH is synonym for the company who acts in the step with time, but nevertheless one step before our competitors. CNC machining ZAH is manufacturer of precision products. In our production range there are different types of soldering tips, screws, nuts, guide pins, studs, sockets, connections and a lot of other products. We can offer you production from very simple to very complicated products. As a base materials we use copper, brass, aluminium, and different types of stainless steel and steel. CNC machining performs on the most contemporary centers for automatic processing. For machine processing we use CNC lathes and milling machines of world brands as it is Citizen, Deckel MAHO and Doosan. Using the mentioned machines we can supply you products which maximal diameter is in range 4-32 mm. Respecting the european quality standards and using the high technologie, our qualified staff can offer you complete project construction. Our products are customized to your special requirements. Galvanization Galvanization is the electrochemical process of protecting metal by electrlysis (oxidation/ reduction process that occurs at the electrodes during the passage of electrical current through the electrlyte). Galvanizing assure product protection from corrosion and wearability. As a base materials for process of galvanization appropriate are: steel, stainless steel, brass, copper, aluminium or ABS plastics. In the process of galvanizing, one or more extremely thin layers of only a few µm (1/1000 mm) are deposited onto the base material in the so-called galvanic cell. The product that is going to be coated is immersed into a metal salt solution (electrolytes) and connected with the negative pole (cathode) of a direct current source. The metal that is going to be deposited also enters the conductive bath in the form of anodes (positive pole) and as salt split into ions. Under current conduction, the metal ion that is going to be deposited goes into solution and is activated by the cathode, which represents the part and deposited there as a metal coating. IRON PLATING NICKEL PLATING CHROME PLATING TINNING ZINC PLATING ELECTROPOLISHING VIBRATORY GRINDING Grinding Surface grinding is used to remove the defined material from product with intent to leveling the surface of product. Grinding is used for finishing, because it ensures a high surface quality. Polishing is the process of machining in which the removal of particles, is used to improve the appearance, to remove oxidation and formation of reflective surface. •Grinding- removal of part of material to leveling •Polishing- compressed material planning Welding Welding is the joining of two or more materials, by melting or pressing, with or without the addition of filler materials, in order to obtain a homogeneous weld. Welding versions in our production are: MIG, TIG, MAG and spot welding. References: Soldering equipment- global soldering equipment companies: - Schwer Präzision GmbH - Weller Tools GmbH - Zevatron GmbH - JBC Solderin SL - Steinel GmbH - Standard Metallwerke GmbH Grinding, polishing,galvanic coating and welding: - König Metall GmbH & CO. KG - REMUS Innovation

Highest quality, efficiency and reliability - our customers expect when you leave their components finished with us. Thanks to our experience, a strong quality consciousness and modern production technologies, we can fulfill these requirements to the satisfaction of our customers. As a medium-sized company, we supply parts since 2006 for well-known manufacturers from the machine and tool manufacturing and the consumer goods industry. So in our plastic and assembly area, we mainly produce plug inserts and plastic components for the electrical industry, while we finished in the metal-working individual, self-, small-and series parts according to our customers. With our own design department, we are able to bring our experience in the planning phase. Often we are able to present potential for a more efficient implementation of a project open, such as in the development of user-friendly components in the area of feeding and assembly automation. What part of our range of services is always of interest to you - the production of your components is in the best of hands! Metal components for the machine and tool - thoughtful and precise. Machining In modern 3 - to 5-axis milling machines we chipping any kind of metals according to your requirements and specifications. Whether items for special machine or Schmiede-/Gussteile for mass production - we are able to produce your components precisely and economically. Jigs For your parts to be machined design and manufacture mechanical and hydraulic tensioners-cost production for your machines. Our mechanical clamping devices are characterized by ergonomic handling and easily operated. They are particularly suitable for medium-sized series and allow the situation safe positioning of the workpieces. For the machining parts manufacturing the hydraulic tensioner is used. Our devices give use free process with high reliability. Special machine Tailored to your needs! As cost-effective supplement for the manual production, we develop components and special machines for the automated processing of assembly and inserts - tailored to your requirements. Components with brains Plastic standard components for the electrical industry - economical and reliable. In the manufacture of plug bridges we focus primarily on the three most popular types on the market: the euro bridge (2.5 A), the Schukobrücke (16 A) and the contours bridge (10-16 A). In addition, we manufacture equipment boxes and other components for the electrical installation. Our plug inserts are characterized by the use of material-saving components that we have developed specially in view of the steadily rising commodity prices.Our hollow pins Black Pint ® or our cold formed pins provide, for example, a material savings of up to 55%! So we can offer you a high quality, functional, standards-compliant product at an absolutely competitive price. Available information on the designs can be found in this brochure. If you do not find a suitable for your application design, please contact us - we are able to realize even special in flexible quantities. Plug inserts with hollow pins: Contours bridges, Schukobrücken Plug inserts with solid pins: Euro bridges, bridges contours, Schukobrücken, device boxes, special bridges

The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008. The activities of each company can be found in the following business areas again Textile • batching • centerwind • traveling cleaner • Transport systems (cheeses, roving bobbins, spinning cans) • suction and vacuum systems • coating and dry locations (use behind Web and knitting machines) • storage systems for bobbins • Palletiersysteme Contract production, such as • Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.) • Milled Parts • complete machine and plant construction according to customer requirements from design to Installation and Service • roller production (up to 8000 mm total length) • Locksmith • Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20) Commercial Vehicles • Production of portal elements • Profile editing • Installation • Coating -Machine Elements • Expanding shafts • Clamping Couplings • chucks and adapters • friction and blade shafts • Shaft handling -Kompressorenbau (shipping) • Start air compressors • pressure vessel • Industrial Compressors • compressed air starter • Air-conditioning • bilge oily water separator • Biological treatment plants Environmental engineering �� Screw mills, up to 120 m³ / h • starscreens • Shovel separators • air classifier Products for the steel industry • Band edge processing facilities • rolling mills ��� conveyor systems A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future. A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

For decades, SISTO has been developping valves and pneumatic actuators for demanding applications of the pharmaceutical, chemical process and building industry with international customers. SISTO Armaturen S.A. is an independent company of the internationally operating KSB Group, a leading manufacturer of pumps and valves worldwide. 100% influence on the quality of our products is very important for SISTO. Therefore, we keep the knowledge of all relevant process steps (turning, milling, lining, coating, curing our membranes, welding, polishing, electropolishing) in-house and continuously develop it further. This competence is not only for our own end products available. We also manufacture quality components for other companies. Our high quality position is ensured by continuous investment in product improvement, simulation methods and innovative manufacturing technology. We obtain additional valuable technological impetus through cooperation with universities. The high qualification of our employees is one of the strengths of SISTO.