We are an industrial and commercial agency with direct suppliers and production facilities in Poland, Czech Republic, China, Italy, Taiwan, India, Turkey and Germany. We design and produce together with our partners to our customers in the following areas: Welded structures such as caddies, storage racks, long-product pallets. Steel construction, welding in general. Surfaces such as rays, galvanizing, painting, powders. Sheet metal processing all materials: CNC punching, nibbling, edges, laser welding, cutting Fully automated bending center, powder coating, Deep drawing, laser cutting, punching from coil, components, Services according to customer requirements Turned parts, milled parts made of all materials Castings and their processing Plastic injection molded parts up to 2,500 grams weighing, + Toolmaking Extrusion plastic profiles Aluminum profiles and their processing Cable assemblies, wire harnesses, control boxes and control cabinets completely Agricultural Engineering Bent wire parts Diecast Bend and process tubes

The company ONIKS Ltd was founded in 1991. and is 100% privately owned. Currently we have employed 70+ highly qualified, motivated and trained workers. We are recognized as a reliable partner of companies all over the world, whath motivates us for additional investment in our solutions and constant investment into the new technologies and our employees. We are focused on exporting to the countries of the European Union (Germany, France, Belgium,...), European countries like Switzerland, and also to the domestic market. With our employees and machinery, we can create products for the most demanding customers. The production is based on the development and processing of metals and plastics with lathes, milling machines, grinders, CNC lathes, and CNC milling machines, water cutting, and high standards of output quality.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

We have extensive industry experience. Our customers come from the fields of aviation technology, rail traffic, protection and defense technology, agricultural machinery, measurement and control technology and general machine, plant and vehicle construction. The products we manufacture are mainly welded and CNC-machined special parts, such as brake, clutch and transmission parts for rail vehicles all over the world (Transrapid maglev train, locomotives). What is decisive for our customers is the high product quality and precision with which we manufacture the components as well as their on-time completion and delivery.

We are a global leader and solution-oriented developer and producer of special ball valves. Highest quality and customer focus distinguish us. "Your satisfaction is our motivation, daily motivation and basis of our corporate philosophy." The many years of successful implementation of solutions our engineers and technicians is directly reflected in the safety and reliability of ball valves produced. Influent findings from the customer contact are directly translated into new, tailored concepts. National and international standards are given full consideration alongside specific customer requirements.

Globus Thermoplast GmbH has been firmly established in Schwentinental near Kiel for many years now, where it has specialised in the extrusion and processing of high-quality thermoplastics. We supply a wide variety of customers from a vast range of industries and regions with semi-finished products and machined components. Globus combines the innovative power of a modern German manufacturer with the down-to-earth nature of a tradition-conscious company with future-oriented strategies. Our many years of experience in plastics processing form our solid foundation.

We are a Slovenian long-established company, which already more than ten years in the Metal processing industry is represented. We are engaged in the production of Fasteners, such as screws and ornamental elements for the furniture industry. The Our products are manufactured using CNC lathes, automatic lathes and Machines, which are necessary for a postprocessing of our products. Our Company is also specialized in the roles of threads in all shapes and sizes. We also offer the opportunity to galvanize or bronzing products. After Wish we pack products also. Our products can according to your request individually or according to standard specifications be made. In our company, we are aware that the price of the Is directed to the quality and appearance of the final product. That is why we continually strive our Products to improve and at the same time produce favorable for the buyer.

WSK Poznań Sp. z o.o. is a manufacturing company with over 100 years of tradition and experience in precision metalworking. Company started production in 1918. Since begining it's located in Poznan, Poland. WSK Poznan has a three divisions of business, production of mechanical injection pumps for diesel engines, aerospace electromagnets and servomechanisms and precision metalworking based on documetation of customers. Factory can provide complet production services such as turning, milling, gavlanizing, heat treatment and final assembly. All steps of production are located in Poland and for procuction we are using european origin materials (steel, bronze, aluminium, forgings and castings). In case of any questions, please feel free to contact with us.

The company Paul Weber GmbH & Co. KG was founded almost 80 years and now has its headquarters in Herrenzimmern in Rottweil / Germany. With a complete range of precision turned parts, we supply our customers nationwide and internationally. Our main products: Turned parts, eccentric, round, square, hexagonal, flat, profile Precision turned parts, CNC turned parts, machining parts, turning parts short, multi-spindle parts, Rotary transfer machining parts as * Expanding nuts, bolts, screws * Locking pieces, * Valves * Banjo bolts * Eccentric bolt, eccentric, * Bearing pins * Terminals * Rivets * Jacks * Standoffs with milling the thread, Standoffs * Fittings * Sleeves We process these materials: * Cutting steel, stainless steel, stainless steel 1.4305, * Brass, non-ferrous metals, * Copper, copper alloys, * Special alloy * OSNA CU * Aluminum, aluminum alloys * High-alloy steels

We work with the biggest Italian and international groups in many different sectors and markets and our strengths are the flexibility and dynamism that allowed us to reach in few years a level of exponential growth to which we can add a notable rate of customer satisfaction. We are convinced that thanks to our own flexible and dynamic way of relating to the market, and to our customers, we can face the difficult and typical challenges of the new global economy. Our machine fleet is continually updated paying attention to new technologies, which enable us to go further to optimize the range of our production and allow us to deliver the finished product including the necessary certifications. We hope to start with you as soon as possible an interesting collaboration and to add you to our best customers. For any other information or doubt we stay at your complete disposal and wait for your request for quotation.

MECAVG is a precision machining company specializing in milling and turning services for the production of high-quality mechanical components. We focus on prototype development, small and medium production runs, and custom tooling solutions. Our team is composed of experienced professionals, with expertise in delivering high-precision parts for industries such as automotive, aerospace, and industrial manufacturing. We pride ourselves on delivering reliable, precise, and tailor-made solutions to meet the specific needs of our clients. At MECAVG, customer satisfaction and innovation are at the core of our operations. Contact us to learn how we can support your projects with precision machining excellence.

The KAMAR-CNC company was established on the initiative of two ambitious people who spent years gaining experience as operators and machining technologists. Working with machines allowed us to learn from the very beginning the technological process and the problems faced by today's CNC market. We know how important the timeliness, quality and precision of the details are. We deal with unit and large-series production. We approach the tasks entrusted to us with full commitment. We strive to ensure that our services are at the highest level. Today we are 8 people and we have 4 new CNC machines We invite you to contact us and cooperate. Mariusz and Kamil

We are a 9001:2008 certified according to DIN EN ISO system supplier of mechanical machining technology. Our specialty is single and small batch production of high-quality, complex and dimensionally accurate components and complex workpieces. Our customers are mainly in the fields of special purpose machinery, jigs, patterns and model construction, precision engineering, plastics engineering, tooling, mold etc..

The SMARTVISION factory offers you high-performance, reliable and economical solutions for manufacturing your components from a wide variety of materials such as non-ferrous metals, stainless steel, plastics or steel. Regardless of whether it is individual parts, series production or fixture construction: from design, programming, production, surface treatment, pre-assembly of sub-assemblies to the assembly of entire assemblies by SMARTVISION GmbH & Co. KG, we offer you everything from a single source.

Adoz s.r.o. is a Czech engineering and manufacturing company with over 30 years of experience in precision metalworking and custom production. We specialize in CNC machining, welding, and assembly of components for a wide range of industries, including automotive, energy, construction, mining, and agriculture. Our modern production facilities are equipped with advanced technologies to ensure high-quality output, flexibility in production volumes, and on-time delivery. We work closely with our customers to deliver tailor-made solutions that meet the most demanding technical and quality requirements. Adoz is a trusted partner for all customers, offering reliable cooperation, technical expertise, and a commitment to long-term business relationships.

Perform3D — your partner for blow molding and hollow plastic bodies Perform3D is your experienced specialist for the production of blow molds, prototypes, devices as well as individual and series parts. With cutting-edge technology and over 550 m² of production space, we offer fast, flexible solutions — from tool manufacturing to finished plastic blown products. Highest quality, punctuality and cost-effective production are our top priorities. Let us achieve your production goals together!

Dear valued customers, We are pleased to prepare a project proposal for you. The following areas are our strengths: - Aluminum extrusions (including processing, surface treatment, just-in-time) - Stamping and bending parts - Pressure die castings (aluminum and Zamak) - Component creation - Plastic parts - Turning and milling parts

We are a young, ambitious, innovative and dynamic company with a clearly defined growth and development strategy. We specialise in the production of complex products and highly demanding metal products for the needs of medicine, the hydraulic industry and agricultural machinery. We use modern equipment from the world's best manufacturers, which enables us to provide comprehensive solutions in an excellent ratio between quality and price. We are highly flexible and offer a wide range of products and react quickly to product changes and other needs of our customers. We are distinguished by a combination of modern technologies, state-of-the-art fast processes and flexible production for dedicated use. Our development strength is a combination of clear strategies, development directions and commitment to our values: flexibility, partnership and efficiency. Our vision is based on technological development, at all levels, and in the continuous improvement of the quality of our production processes, the goal of which is: successful and long-term cooperation with our customers and partners.

COMPANY Our extensive range for you: »Aluminium gravity die casting »Mold making, tool and fixture »Machining »Heat treatment of cast aluminum parts »X-ray inspection ��CNC sinker EDM »Installation of components and finished parts Due to the long-standing cooperation with competent suppliers, we can offer you the following services in addition: Powder coating, yellow chromating or vibratory finishing. Ask us. We will respond promptly. FOUNDRY In our foundry castings are produced in the mold gravity casting. We work with conventional casting techniques as well as with casting machines, casting machines and hydraulically controlled tilting casting machines. The unit weight of our castings have the wide range of 20 g to 22 kg. In order to reduce post-processing, it is possible to pour holes and cavities in front, and with cast-in. With the loading of sand cores, the requirement is created to manufacture large undercuts.A clean and coatable surface is an essential quality of our castings. Our quality philosophy is based on expertise and years of experience. Talk to us. We will find a solution to your problem. Examples of cast-in are: "Threaded bushing (brass steel stainless steel) »Bolt, Bushings »Setscrews »Various parts provided by the customer The material aluminum Aluminium offers the advantages of being very light and very resistant to corrosion. With aluminum, twisty, thin-walled, pressure-proof and vibration resistant castings can be manufactured. Whether DIN or special alloy, we refer all aluminum alloys directly from the smelter. If you wish, we can also provide a certificate of analysis of the different alloys available. TOOL Rittel our name stands for high quality in the field of tool and Kokillengusses. In order to produce a high quality, perfect casting, especially a highly accurate and precisely crafted mold is required.With our world-class high-tech machine tools, we are able to provide the highest precision. The following machines are available: "Conventional milling machines »2 CNC milling machines »3 CNC machining centers and »2 Errodiermaschinen. On the 5-axis machining center and the path-controlled Senkerrodiermaschine we are particularly proud. Through a network of our CNC machines and our machining centers are connected to a server. This creates a flawless data exchange between the two CAD / CAM workstations is guaranteed and we can not accept designs of our clients in the most popular data formats. PROCESSING Mechanical Production Milling machines, machining centers and CNC lathes at our disposal for the machining available. In the field of cast iron makes our many years of experience the highest level of accuracy and process reliability possible. In our mechanical production but workpieces are produced, which are not made of cast iron.Also in this area is the 5-axis machining center and the path-controlled Senkerrodiermaschine represents a special Assembly To meet the demands of the market, we have a few years ago on the assembly of components our range - with and without Castings - expanded. We take for you to place an order, picking and packing of purchased parts to ensure the timely delivery of the module.