Since 1952 WSK "PZL- Kalisz" S.A. has been representing Polish aircraft industry and manufacturing aircraft piston ASz-62IR and AI- 14R engines. They are designed to power the following airplanes: An-2 and M-18 “Dromader" (ASz-62IR) and respectively PZL-101 “Gawron” and PZL-104 “Wilga” (AI-14R). These engine types have been worldwide recognized for their quality and awarded numerous quality certificates issued in the USA, Canada, Brazil, People’s Republic of China. They have been produced in thousands and have proved failure free thus clearly evidencing their highest reliability and performance quality. WSK “PZL-Kalisz” S.A. also overhauls and performs repairs of ASz-62IR and AI-14R engines. In addition, the Company manufactures and repairs assemblies and parts of TWD-10B engine for An-28 aircraft. WSK “PZL-Kalisz” is a joint-stock company (own capital is 85 mln PLN and paid-up capital is 45,86 mln PLN) operating on the basis of the Commercial Company Code. Principal shareholders of the Company are as follows: - Industrial Development Agency 75,45% - Company employees 11,59% - SEMA Sp z o.o. 6,25% - the City of Kalisz 1.35% - Energy Plant "Energa S.A." 1,20% - Other shareholders 4,16% WSK “PZL-Kalisz” is a capital group composed of the mother company and its 2 fully-controlled subsidiaries: - ZOT “NARZĘDZIOWNIA WSK” Ltd. - PPUH „MECHANIK” Ltd. WSK „PZL-Kalisz” S.A. is the company of the essential importance for the Polish economy and is considered as part of the Polish Defence Industry Potential. As a result of the Company's restructuring process WSK "PZL- Kalisz" S.A. has extended its business into wide range of manufacturing programs and servicing activities including production of high pressure engine parts, oil pumps, gears, aircraft screw gears, turbochargers, push rods, pump housings and first of all crankshafts for high pressure engines. All these components require high precision machining in performing special requirements of its customers. WSK "PZL-Kalisz" S.A. maintains business relationship with well-renowed companies such as: General Electric Transportation Systems, Allison Transmission, Turbomeca, Sulzer Textil Switzerland, Pratt & Whitney Kalisz, and many others. Part of the Company production is designated for military aviation. The Company aim and priority is focused on meeting the Customer’s requirements that can be with WSK "PZL-Kalisz" capacities. WSK “PZL-Kalisz” S.A. acquired modern machinery operated by highly qualified and experienced technical staff. The Company continuously seeks new Customers and Suppliers especially in the manufacturing of precise and aviation components requiring high precision processing. Interested partners are always welcome. In 1999 the Company was awarded ISO 9001-2000 Certificate. In 2000 the Company was granted PART-145 Certificate. The following year – 2001, the Company attained PART-21G Certificate. In 2002 the Company was awarded AQAP-2110 Certificate. In 2004 WSK “PZL-Kalisz” S.A. was granted a license by The Polish Ministry of Internal Affairs and Administration for manufacturing and trading products and equipment for military and police force application as well as transfer of technologies. In 2009 the Company was awarded AS 9100 Certificate.

The company Frentech Aerospace sro, now one hundred percent in the Czech owned, was founded in 1994 to be with the aim to become a qualified and competitive suppliers in the field of precision engineering. Initially, the products were targeted in the field of medical technology, microelectronics and special machines, including the delivery of spare parts.

Gutekunst connecting parts GmbH is your specialist for standard parts and custom parts. In almost all materials we manufacture from small to large, from simple to complex. By default, we process all common plastics, steel and nonferrous metals. By an appropriate stockpiling we can respond to our customers' requests in individual cases quickly.

Prämab GmbH & Co. KG 78 Employees Certificated quality assurance: DIN EN ISO 9001:2000 Certificated quality level for welding: Extended welding certificate according to DIN 18800 Additional welding certificate: Permission for welding on railway-vehicles according to DIN 6700-2 Abilities Welding, Machining, Workshop assembly Manufacturing of heavy and complex parts with high quality Shop assembly of machines for special purpose On-side erection, Commissioning Engineering Taylor Area maximum weight of single parts: 20 t CNC-torch cutting device material thickness up to 250 mm working range 3.700 x 12.000 mm Sand blasting machine cross-section up to 1.500 x 500 mm Sawing machine maximum diameter 500 mm Welding Workshop maximum weight parts up to 90 t manufacturing area 16.000 sqft Equipped with modern welding gear, MAG-, Impulse-, WIG-welding devices Flame heating and flame straightening technology Machining Shop maximum weight parts up to 90 t several boring mills, CNC table size 5.000 x 9.000 mm 6 - Axes turntable size 2.750 x 3.250 mm working range x,y,z: 12.000 mm,4500 mm,1250 mm maximum accuracy +/- 0,05 mm Turning machines maximum diameter: 250 mm maximum length: 2000 mm Milling machine table size 1600x335 mm working range x/y/z 900/ 355/ 450 mm Radial boring machine maximum boring diameter 100 mm max. working radius 3.000 mm Workshop Assembly maximum crane capacity: 90 t assembly area: 7000 sqft height shop crane: 40 ft Clamping plates for accurate assembly of complete machines and components Assembly of electric parts, wiring, piping of hydraulic and pneumatic is made by fixed local subcontractors

Development, design and production of complex system solutions in the field margins and fairs. Innovative manufacturer of modular fixtures and modular systems for machining centers, mechanical clamping means of quality control, to the special industrial equipment. CNC manufacturing, vacuum plasma nitriding

Our enterprise is a private company which continues the 25-year tradition of clutch and brake production in Ostrzeszów, Poland. The company was established in 1993. We employ a highly qualified staff of over a hundred and have our own research and development base. We manufacture a wide range of controllable clutches and brakes used in machines and appliances in various branches of industry. We also cooperate with major German enterprises in this regard. In order to guarantee high quality of our products and meet our customer's needs, we implement the ISO-9001:2000 quality system confirmed by a certificate obtained from DQS. Range of services offered by FUMO–Ostrzeszow: 1. Machining: • Turning: Dmax = 560 mm; Lmax = 900 mm; weight max 100 kg • Milling: Lmax = 1000 mm; Smax = 1000 mm; H max = 1000 mm; weight max 500 kg • Straight teeth chiselling: Dmax = 500 mm; Lmax = 90 mm; module mmax = 5 • Grinding of holes: Dmax = 120 mm; Lmax = 160 mm; weight max 25 kg • Grinding of shafts: Dmax = 150 mm, Lmax = 500 mm; weight max 25 kg • Locksmithery and fitting, including the winding of coils of self-baking wire: coil wire dimensions: D=0,15÷1,40 coil dimensions Dotw 25÷200; L = 10 ÷ 80 mm 2. Heat Treatment: • Hardening of pieces in the electric tunnel furnace with ZAS III protective atmosphere piece flank Lmax = 450 mm lub D max = 450 mm; thickness 0,5 ÷ 6,0 mm; weight max 4 kg • Annealing, hardening, tempering in furnaces without protective atmosphere SQ310 • Induction hardening with UNITERMA–60 system 3. Thermochemical Treatment: • carburizing 4. Chemical Treatment: • phosphating of pieces coat thickness 0,003 ÷ 0,005 mm • blacking 5. Plastic working: • die shearing, stamping, tonnage capacity of the press: 16; 100; 400 tonnes 6. Tool Shop Work: • Manufacture of technical instrumentation • Manufacture of plastic working instrumentation: blanking dies, stamping dies, etc.

The Kurt Schneider AG is a mechanical operation in the field of production and module assembly. Our products range consists of the complete manufacture of individual parts to series production. We can manufacture simple to highly complex products of any materials.

Company General Mechanical Precision Working in small and medium series, so much for the food (wear machine production parts, machining unit or series of complex parts used in the manufacture of machinery for the food). Our responsiveness and flexibility allows us to respond promptly to any request and may be an important asset to solve some untimely stop producing factors. Our means of production are: - 1 4-axis machining center high capacity 3000 * 2100 * 760 - 2 4 axis machining centers in 1350 * 630 * 700 - 2 digital controlled lathes cap.DIAM.500 * 1000 - 2 digital controlled lathes cap.DIAM.150 * 250 - 1 round capacity conventional diameter 350 * 600 and 4000 * diam.600 - 2 grinders - 1 cylindrical grinding - 2 stroke 400 mortisers

The SLR MetallbearbeitungsgesmbH, based in the year 1990, was taken over by SLR Gusswerk II BetriebsgesmbH as one-hundred-percent subsidiary factory in 1997. Since 1990 the SLR-MetallbearbeitungsgesmbH machines cast parts for SLR Gusswerk II BetriebsgesmbH by modern manufacturing machines. These cast parts are for the vehicle industry with high quality standard. Certification: ISO9001 Production of: CNC turning and milling turning workpiece milling parts contract manufacture of series production part assembly of component assembly for middle and high volume vertical turning and boring mill precision turned parts Products for: Drive and gear components Construction equipment Utility vehicles and agricultural vehicles Railroads, machine tool industry Hydraulic industry Materials: processing of all current metallic materials Machines: 11 processing center 7 CNC-lathes 3 3D-measuring machines 1 Broaching machine

We offer a comprehensive range in the production of tools for the construction and related trades, as well as in the production of turned and milled parts. The now run by the 4th generation Tyrolean Tradionsunternehmen established itself through consistent quality work and technical development in CNC technology to a modern metalworking operation.

The company J. Flock has specialized in the manufacture of hydraulic and powertrain components in the diameter range from Ø 4-20 mm and lengths up to 200 mm. The product range includes hydraulic, control, and valve pistons and shafts and axles for the drive technology. We process all machinable materials, as well as titanium, Triamed and Densimet. To produce exclusively CNC controlled machines and systems are used. In addition to the manufacture of hydraulic and powertrain components we manufacture bullets: lead-free copper hunting bullets, precision projectiles (lead free), projectiles with hard core, as well as subsonic bullets with increased penetrating power. The Calibre range from: 4.6 to .50 BMG caliber - we manufacture bullets come at renowned weapons manufacturers, government and in SEK at home and abroad for use. Our philosophy: Your product is our driving force. Partnerships live by: * Precision with the latest CNC technology * Optimization with competence and know-how * Flexible delivery times * The best solution for your product We support your product from inquiry to finished product precision.

The name Bihler guarantees for more than five decades for the highest quality. The same high standards (DIN EN ISO 9001:2001), which we place in the production of Bihler machine parts of the day are, of course, also in contract manufacturing. Here we offer you everything from a single source - from the design to the procurement of materials, the manufacture of precision parts (turning, milling, grinding, etc.) and fully assembled modules, the post-and surface treatment of workpieces up to on-time delivery.

We offer high-precision production parts (large and small quantities) devices as well as complete assemblies in the field of contract manufacturing. Modern CNC machines enable the production of complex machined parts and turned parts. We mill on 8 machining centers with 3 - to 5-axis. All CNC machines are networked with our Esprit - Programming Station. Here not only programs can be created, but also programs and drawings are processed for our customers. We are a system supplier, that is, our services include: * Material procurement * Mechanical production * All surface and heat treatments * Mounting * Functional testing (including measurement protocols) * Creating FAI or ISIR incl 3D Measurement Products Rotary parts with a diameter 3-250 mm, up to a length of 300 mm Milled parts up to max. 800x450 mm Materials Are processed plastic, steel, cast iron, stainless steel and non-ferrous metals, copper, brass and aluminum. Program of delivery Manufacture and assembly of cutter sets for wood processing industry, production and installation of the electronics housing for the aviation industry, cast iron for the automotive industry, fixture, contract manufacturing. Heat treatment processes and surface coating continuous heat treatment processes such as carburizing, nitriding, among others, as well as the best known methods for surface coating such as chrome plating, galvanizing, painting, plastic coating, inter alia, Certified Quality We are certified according to DIN EN ISO 9001 company. Our quality management qualification, our employees, product quality and delivery reliability for our customers is ensured in the areas of aerospace, automotive and mechanical engineering.

As a provider of prototypes and small series production, we make a point to meet the expectations placed on us for quality and on time. For us, before individual and personal customer service, during and after the project implementation of the company philosophy. In addition, we also manufacture smallest and large spare parts for patterns. Furthermore, we are are happy to help you solve your manufacturing and To support capacity problems and provide you with a reliable partnership for • Detail Engineering (CAD, CAM) • Manufacturing • Procurement • Installation • Shipping

Dear Ladies and Gentlemen, We are a reliable and flexible supplier for the machinery and plant engineering, electrical and other industries. Our many years of experience in the machining of aluminum, steel and various materials distinguish us and we would like to convince you in a personal conversation about our work. Thank you for your attention I am happy to hear from you. Sincerely, Uwe pile T-cut CNC manufacturing technology ESC GmbH

With over the 28 years experience, Şanlı Rulman Yatak Otomotiv San. Tic.Ltd. is your one stop contract manufacturing company.Şanlı rulman yatak san.Ltd. is not only Plastics İnjection and mould making company, but also a casting and complete precision machining facility utilizing the latest in advanced Computer Numeric Control (CNC) milling and turning technolog ies, supplying quality parts for many industries such as Automotive, Telecommunication,Electronics Medical, Aerospace, Industrial and Commercial Industries. Şanlı rulman yatak san.Ltd. has maintained itself as a leader in the field of Plastics mould an injection technology by continuously investing and upgrading it’s capital equipment, as well as providing intensive in-house technical training in the machining of complex parts and exotic alloys to it’s qualified workforce. Şanlı rulman yatak san.Ltd.continually strives to be at the forefront of technology, equipped with the latest CNC machines and equipment, CNC turning with “C” axis capabilities and CNC milling (including 5-axis capabilities). This combination of capabilities makes us a powerhouse, an advantageous one-stop choice for today’s demanding customer. Şanlı rulman yatak san.Ltd. continued success and growth is due in part to its extensive diversification of services and products into new industrial sectors. Elimetal is renowned for it’s flexibility and competitiveness while maintaining extremely high stand-ards of quality control in producing specialized parts, batch production, components and sub-assemblies for its customers Şanlı rulman yatak san.Ltd. diverse capabilities, innovation, adaptability and quality control all help to position us as the supplier of choice for present and future customers. Utilizing state-of-the-art manufacturing processes has enabled us to provide value added products and services to the industries we serve.

Year of establishment: 1954 Delivery: 129 425 t Sales: EUR 289 million Export: 86% Sales / Employees: 293,000 EUR Owner: ELES 80% (ELES is the Slovenian state-owned electricity producer) Employees: 988

We are a specialized company in technical moulds, able to respond to most demanding deadlines, complex requirements and quality requisites.