With over 200 employees, we manufacture at our sites in ice rink, Schönbrunn and Apolda for our customers turned parts from a workpiece diameter of 0.2 mm to 250mm, threaded rods and assemblies on the most modern CNC lathes, machining centers and multi-spindle automatic lathes. It processes material from 0.5 mm to 65 mm diameter of the rod and 240 mm diameter chuck parts from almost all machinable materials (cutting steels, structural steels, case hardening steels, rust and acid resistant steel, V2A, V4A, titanium, brass, ECOBRASS, aluminum , plastics, and any other machinable materials) The production scope includes threaded rods to M42 or trapezoidal thread with a pitch to 6 mm up to 6000 mm length, gears (for steel to module 0.8 and brass to Module1). In separate manufacturing areas, we have created the ability to perform additional operations such as drilling, milling and sawing, bending, punching, pressing, broaching, welding, soldering, thread rolling and thread cutting and assembly work. Heat treatments and surface finishing are carried out in cooperation with selected expert partners. Highest standards of quality, reliability and flexibility are the basis to earn and build the trust of our customers. Through our ISO 9001 certified, process-oriented quality management system, we are to provide top quality consistently able to offer our customers.

Matthies Druckguss has been working with you as a partner since 1955. During this time, we have been able to gain significant experience and acquire important knowledge in the field of die casting, which makes up our know-how. Today, we are not only the “die-cast supplier” for our customers, but also take on a wide range of tasks for them (system supplier), with the aim of a cost-effective product. By selecting nine different alloys from the areas of aluminum, brass and zinc, intensive advice during the initial planning processes, precision-precise design and subsequent custom-made production of series parts, we guarantee that we will meet your requirements. Together with you, we develop the optimal casting part, plan the optimal layout of the casting system and finally manufacture the mold in our in-house tool shop. We then sample the first tool-falling castings under series conditions and present the samples to you. If everything is in order, then we start our fully automated series production in our die foundry. In further steps, the cast raw parts are deburred and mechanically processed using precise CNC processing centers. Finally, the finished parts are prepared for shipping. With our partner shipping company, we ultimately ensure fast and problem-free delivery of the goods. We see ourselves as a system supplier. Because this is how we make things as easy as possible for our customers and their ordering as pleasant as possible. We take on all tasks from A for “delivery of raw materials” to Z for “delivery of finished castings.” And since everything comes from an experienced source, customers can rely on the fact that consistently high quality is guaranteed and that the results will be delivered to the desired location in exact quantities and on time. Thanks to a local partner shipping company, a rarity among die casting service providers, delivery is neither delayed nor do customers have to contact third parties. It's obvious that our logistics department not only takes care of the delivery itself, but also the required packaging. Relevant benefits that are decisively reflected in satisfaction time and time again. Unbeatable when it comes to service, too: We can react flexibly even if changes are requested at short notice. And thus deliver a full range of die-casting services with a well-thought-out system. A functioning production chain that ranges from the initial die-cast idea to the sample piece to the finished series. - Various aluminum, zinc and brass alloys - Certified according to DIN EN ISO 9001:2015 - custom-made castings - short delivery times - perfect quality - Use of proven and innovative technologies! These are just a few of the features that make for exciting precision work. Personal customer advice and support is just as important to us. We support our customers right from the start so that the result really meets their requirements — a matter of course for us as a family business.

Vermeulen Metaal We are a multidisciplinary metalworking company. We process all common materials. We specialise in: - 2+3D design and drawing work - Standard welding work - Certified welding - Piping for drinking and process water - Laser cutting - Stitching - Rolling work - Sheet metal work - Construction - CNC turning - CNC milling - works of art / attractions / specials - Assembly of semi-finished products / machines

Cutting-edge technology, comprehensive project management and support The Helmut Klingel GmbH is specialized in the processing of difficult materials (stainless steel, glass composite alloys, titanium, special metals) and the production of components with complex geometries. In our modern machinery with more than 87 CNC lathes, 53 CNC milling centers and 8 wire EDM machines by machining components can be manufactured 500 mm are produced with an outer diameter of 3 mm to 250 mm and with dimensions of 300 x 400 x. Our core competencies "Rotate" milling "and" wire erosion "are optional assembly and customized logistics complemented by a comprehensive consulting service. Additionally, we offer a variety of other technological processes, such as surface treatments and coatings. We handle and process: # All stainless steel alloys (suchAs 1.4301, 1.4307, 1.4404, 1.4571) # Glass composite alloys (such as Kovar, Vacovit, Ni-Fe alloys) # Expansion alloys (such as Invar) # Titanium and titanium alloys # Copper and copper beryllium # Special metals (such as Monel, Inconel, zircaloy, Hastelloy) # Plastics (such as PEEK, POM) The Helmut Klingel GmbH produces: # Components for dental implantology # Sensor components # Amplifier enclosure for fiber optic data transmission # Components for endoscopes # Modules for positioning What we also offer more Surface treatment of any kind: galvanized surface finishes, sanding, polishing, tumbling, etc. Erode All heat treatments Laser Marking: Datamatrix, barcodes etc.

We are spezialiced to built complex parts, and assembly it. We are working for automotive and machinebuilders. We make turning and millingparts. We make hobbing part too. We can make own machine and fuxture, include the control unit. We working fast and correct, since more than 20 years.

Metal Investigating operating for prototypes, single, small series and medium series. Welding certificate according to DIN 18800 Class D for MMA, MAG, TIG, MIG gepr welders for aluminum, mild steel and stainless steel Water jet Blank and pre-processing means of water jet technology in the 2-D + 3-D range of all metals such as steel, stainless steel, aluminum, titanium, copper in sheets, as well as partially processed products, such as bending edge moldings and dished bottom that only after the Editing us can be cut to shape. Also, plastic, GFG, CFRP, glass, ceramics and composite materials are cut by us. We cut almost all materials in 2 - and 3-dimensional design. Construction We offer special constructions of any kind according to your interests. Contract manufacturing of components and assemblies including mechanical processing, welding construction and final assembly including surface treatment, surface, edge and slide grinding of metals. Metal Sheet metal and metal processing, production of steel stairs, metalworking and welding, window systems, door systems, door systems, curtain walls made of steel, aluminum and stainless steel.

WIR electronic, a manufacturer with more than 25 years of market experience, offers the following services: - manufacturing from individual customized single cables up to complex wire harnesses, 100% made in Germany - each product ist tested, with 5 year-warranty - consulting, design, engineering and production; everything from one source - 100% delivery reliability, with short communication channels to our customers - from batch size 1 up to 10.000 pieces, from prototyping to mass production - overmoulding (e.g. RJ45 straight/ angled; M12 connectors: A-, B-, D- and X-coded) - product range: data cables | single wires | ribbon cables | cable harnesses | coaxial cables | fibre optics | power cords | drag chains | control cables | bus cables (CAN, EtherCAT, PROFIBUS, PROFINET) | mounting/cabling of panels up to distribution boards | and many more - cables with extended or unusual length (e.g. VGA cables up to 50m, KVM cables up to 80m) - Production of cleaned cables (optical industries, medical technology, aerospace technology, micromechanics)

The ARNO HENTSCHEL GmbH was founded in 1943, re-privatized in 1990 and now presents itself as a powerful, pan-European supplier for the steel construction, metal and engineering, will find its metal products and forming tools in almost all industries worldwide use. The product line includes more than 1000 positions, about 750 of them alone in the stamped part segment. Products: - Grating fasteners and accessories - Gitterrostbau to customer - INFORMATION GENERAL punching Article With its own, powerful tooling and modern equipped fabrication shop we are able to quickly and flexibly to customer wishes, what our great product range reflects. We offer: - Forming - Cutting, bending and square tools - Follow-on composite tools - Wire EDM As a medium-sized company HENTSCHEL ARNO GmbH is always in a position, good value for money to offer to guarantee the shortest production times for "tailor-made" grids and shortest delivery times for stamping parts through its own extensive inventory.

The company Helmut Eltner tooling GmbH is a family business. They emerged from the company Koser & Eltner which was founded in 1966 by Hans Koser and Helmut Eltner in Main Valley / Wachenbuchen. After the death of a shareholder, the company was taken over by Helmut Eltner 1982. It soon became apparent that the old premises did not allow for necessary investments more. Therefore, a 3500m ² plot of land was purchased in 1989 in Kahl / Main and built a 800m ² building, which was purchased in 1990. The machinery has been since that time continuously expanded, and modernized in order to respond flexibly to customer requests. In 1996, Dipl-Ing. Ralf Eltner ordered the second managing director, the company is run by him alone since 2001. Manufacturing Technology Flach-/Profilschleifen Rail profile grinding Wire EDM Die sinking Hole EDM from Ø0, 6mm Gauge Jig Grinding Milling, drilling HSC milling Turn CAD / CAM

EuropTec has a broad variety of processing technologies in glass and polymer and provides the philosophy of a one-stop-shop. polymer processing, thermoforming and deep drawing of any thermoplastics, from PC, PMMA gs/xt, PET-G, ABS, PVC, PS up to PPSU, Radel for medical applications, technical parts, displays etc., pressure forming for cosmetically surface applications CNC-machining and drilling of high-end and high-temperature thermoplastics like PTFE (Teflon), PVDF, PEEK, POM, PE-UHMW, PA, PPH-HS, PPSU. Lasermarking of Polymers, Pad- and silkprinting of glass and polymers.

We offer: Plastics Processing Product design, development, support and advice from the idea to the finished product. Assistance in material selection Design and manufacture of injection molds Manufacture of plastic injection molded parts up to 300 grams weight Assembly Pre-series (SLA, SLS, vacuum casting) and finishing with external partners We offer beyond that: Refinement of injection molded parts, special surface treatment (painting, printing, embossing, etc.). By external partners Assembly of components (including orbital riveting) to reduce your production depth High-performance tools and motivated, well-trained staff provide a high level of quality.

The MBM Lychen GmbH is your competent partner for the manufacture of machinery parts in the installation qualities (IT 6 and IT 7) as well as the assembly of modules. We work on prototypes, single parts and series in all sizes and provide a job shop machine fixtures forth according to your technical drawings. In addition, our company sees itself as a "fire brigade" in case of damage to machinery and equipment. That is, in an emergency, we do your orders within 24 or 48 hours. The MBM Lychen GmbH has all the machinery and equipment for cutting shaping of the classic built-in components of all kinds. With the support of reliable partners we are further able to your needs in the areas of heat treatment, surface finishing and coating edit technology and sheet metal work in full. The following materials we process with our modern machinery: - Non-ferrous metals (aluminum, copper, brass) - Hot and high-strength steels, - Construction and quality steels, - Hardened and tempered steels, - Tool and nitriding, - Stainless steels, - Cast iron, - Nickel and titanium alloys, - Plastics

We see ourselves as all-round service provider in the field of plastics technology. From consulting to prototyping, mold and tooling to manufacturing assembly and dropship we offer our clients comprehensive solutions and services from one source. Our particular strength lies in the quality and performance characteristics of our production. In addition to our top technical equipment we use only the best-prepared materials. Our specialty is the high gentle drying of various plastics. The relevant specialized and trained staff are employed at the place in the company. The motivation of our team is the long-term guarantee that our injection molded parts arrive on time and in the required quality at the customer. Especially in small quantities, flexibility and speed is our strength.

Specialist in welding carbon and stainless steel and aluminium. Producer of offshore containers, trailers chassis sandblasting boxes and others. All required certification and testing included.

Ladies and Gentlemen We are a company from Lithuania specializing in steel construction, Slaughterhouse facilities, meat and fish processing industry specialized. At present we are expanding our production capacities and we are looking for new partners across Europe, whom we can use with our capacities can help. If you are interested in having a good partner in Eastern Europe - then we are here for you. Best regards Ricardas Salkauskas

Our company now has a twenty-year history. We work on 2 buildings, one used for the preparation of components and carpentry, the other for mechanical, electrical assembly and system testing. Our customers entrust us with both the construction of components and semi-finished products, and the construction of complete machinery and plants. Over the years this has allowed us to be able to offer ever more complete solutions to our collaborators. We are able to take care of the realization of the products from the design on customer specification (or co-design) up to the delivery of the finished product, taking care of all the intermediate phases 100%. We create 3D CAD models of all our products to facilitate the interface with external suppliers.

We are Ošukalns celtniecība SIA from city Jēkabpils in Latvia. We started our operations in 2003, when a new and small construction company was established with only one construction team. Company was growing and as the years went by, the need for welders and metalworkers arose. In 2018 company made metalworking branch. During years we could fulfill not only needs of construction branch, but also took orders from outside the company. Every year we are growing and producing more and more. We have gained the trust of several foreign clients with whom we successfully cooperate. We have become stable player in metalworking industry. We are providing not only metal to our clients, but solutions thru competitive pricing together with good communication, quality and fast deliveries. We have customers in Finland, Sweden, Norway, Denmark, Iceland, United Kingdom, Netherlands and Baltic states. Our main products is construction steel, material handling equipment, parts for conveyors also parts and welded assemblies for mining industry, bespoke products for industry, etc. Lot of stainless steel products have been produced for companies in food and mining industries.