We are a Portuguese company specialized in the production of metallic, technical and decorative, products. Besides our product line of architectural hardware, we propose our services for medium and large series in a great variety of industrial processes: - Hot forging (brass, copper) - Zinc die-casting - Brass die-casting - Metal sheet stamping (brass, stainless steel …) - Machining - Buffing and polishing - Chrome plating and other galvanic finishes - Cataphoretic painting and lacquering - Components assembly We are now acting as a subcontracting company for the following sectors: automotive, faucets & sanitary, luxury, electrical appliances To see our own product range please visit www.tupai.pt

We offer a professional service for repair and service all main spindles with ball bearings. Our experience of more than 25 years is a solid foundation. More than 12´800 repaired spindle units were successfully serviced. Our focus are based on customer relations, cost tranparency and effeciency. All replaced parts are reported and pictured. In any case you are welcome to visit our facilities in order to trust our services. NEW! We offer taking out and rebuilt off and into the machines at customer side (Field-Service) including installing tool changer and geometry of the axis.

The company Wegner Kunststofftechnik is a family-run company and known as a high-performance manufacturer of high-precision plastic articles. We are characterized by a high degree of flexibility, know-how and reliability, which is of great importance in the current fast-moving time. To live up to this claim, as a family-run company we maintain flat hierarchies and always involve our employees in the individual processes. We believe who wants to understand customer needs and customer expectations, must communicate with customers. Our customers are our partners. We intend to identify the needs and future tasks of our customers at an early stage and to solve them reliably. To achieve this, we have implemented a quality management system according to the international standard DIN EN ISO 9001: 2015.

Step by Step: From blank to paintable product The basis for a clean paintwork: a fat and grease free substrate. However, especially in the metal processing of permanent use of lubricants is essential that supplied us parts are therefore not readily paintable.

About Us: Since 2003 we manufacture in our factory in Bangalore, India, precision turned and milled parts for numerous German and Indian companies. We achieve attractive unit cost reductions both in mass production and in small series and individual parts. We offer the cost advantages of the Indian site in German quality and reliability of supply - both your contact and the distribution center are located in Germany. Range of services: The range of our production ranges from welding, milling and turning to heat treatment, assembly and surface treatment. For production, we have a comprehensive machine available, including a wide variety of CNC precision turning and machining centers, which were imported from Germany. For high-quality follow-up of parts such as hardening or anodizing and production as well as other steps that can not be realized in our home, we have a network of Indian suppliers available with which we have been working successfully for many years. Logistics / customs clearance: If you use our work in India for purchasing parts, you have nothing to do with the logistics - to the delivery of your order we will take care. We assume both the customs clearance as well as the logistics of your order, the transport is either via air or sea.

DVF SCREW is a family business growing, located in the heart of the Vallée de l'Arve (Haute-Savoie) for over twenty-five years. Specializes in turning small, medium and large series (maximum capacity 28mm) in various materials such as aluminum, brass, standard steel, non-alloy steel, plastic (PA6-6, Teflon, Nylon, POM) or stainless steel 303.304 L, 316L ... Its fleet technical and diversified machinery enables the realization of simple parts or complex finished parts on machines. DVF decolletage is certified ISO9001 2008 version by TÜV SUD. The industries are furniture, computers, automotive, cycle, agricultural, medical, aerospace or weapons. Periods of rapid responses and listening to its customers demonstrate professionalism in their work. DVF SCREW is a dynamic structure. We are at your disposal to all requests. Translation by Google Translate

CNC turning CNC milling CNC production Hofer manufacturing technology offers: In our CNC production, we produce according to your drawings or directly to your CAD data. Hard machining to 62HRC and 3D milling are only a small part of our range. We work on all materials such as: 1.2379,1.2510,1.2294,1.4435,1.4404,1.4562 Aluminum, titanium, bronze, brass, etc. We solve your unsolvable problems. We design and draw your components, and assemblies in 3D We assemble and test your assemblies. We organize all surface treatments and hardening processes such as: Vacuum hardening, carbonitriding, precipitation hardening, case hardening, gas nitriding Chem.Vernickeln, nickel plating, bronzing Sand blasting, polishing Anodizing, Altefieren, hard anodizing, Ematalieren As a small business we are able to react very short term in the position. Our specialty lies in prototypes, individual parts and small series.

The WAG Wernli AG stands for over 30 years, from one of the leading Swiss supplier of technically advanced solutions in the field of fiber-reinforced plastics. With our 15 employees and the excellent infrastructure, we can offer our customers flexible and fast production schedule appointments, including quality, delivery and a very good price-performance ratio in the foreground. Our offer to you: Technical molded parts made of fiber-reinforced plastics. From the development to the production part. From 1 part to about 70,000 parts. In thermoset or thermoplastic. A variety of resins such as polyester, vinylester, polypropylene, etc. as well as glass, carbon, Kevlar and natural fibers as reinforcement.

CNC Mechanik AG offers world-class manufacturing solutions for complete systems, modules and components according to customer specifications. We have a broad based manufacturing and process know-how. Its core competencies include: milling, turning, drilling, joining technology, cleaning, measuring and installation.

The company Strobel was founded in 1979 as a private company, was created in 1999 out of this today Strobel CNC manufacturing GmbH. We are a small, efficient company and manufacture, modern CNC - machines demanding, mechanical components. Our regular customers know our service, as well as to appreciate the quality, reliability and flexibility. We handle almost all machinable materials by milling, turning and drilling for drawing or sample. The production range from components for hydraulic controls, such as valve housing, connection plates, fittings, nipples and couplings, as well as fully assembled valves over mechanical components for the electronics in mining, storage and drive housing, pulleys, to processing of aluminum profiles for window construction. For surface treatments, we have reliable partners. We manufacture in batches 20-1000 piece. Our company is certified according to ISO 9001:2008. We only go backwards if we need start to solve your problem! Our machinery in the milling area currently consists of four processing centers the company Hurco as well as a center of Matra. Using these centers, we are able to extremely fast to respond to all our customer requirements and to produce both highly complex prototype and production parts cost. By consistently sophisticated accessories such as rotary axes and jigs we steadily increase our productivity in order to meet your requirements. In our centers we can currently rely on travels of 1060 x 610 x 610mm. Your success is our goal! Turning, we use mainly on turning centers of the company Mori Seiki, are characterized by high reliability and so on to bring us our motto one step: Your success is our goal!

Manufacturing competencies Assembling • Electromechanical assembly • Mechanical assembly Drilling/boring • Drilling / threading / tapping Milling • Form milling (3 D) • Surface milling (2 1/2 D) Mould making • Mould replacement / wearing part manufacturing • Pattern / model making Turning • Turning

Veslatec is an ISO 9001:2008-certified company whose core competence is the laser of titanium, tantalium, stainless steel, ceramics and also thin metals. Veslatec offers 3/2 D laser cutting, laser drilling, laser marking, 3/2 D laser welding, 3/2 D laser micro machining, machining, bending, different coating and product assembly By utilizing the latest and most advanced laser micro machining technology (fiber laser) and traditional production services, Veslatec offers laser application developments and a wide range of contracting services. Our services are mainly found in applications within the industrial, medical, MEMS and aerospace branches. Related products are medical devices, dental implants, drug-delivery systems, micro fluidic devices, and other products characterized by extremely small features. Laser micro cutting and welding of medical devices The high-precision (accuracy better than 15 μm) and new laser technology that the company uses includes almost burr-free cutting and smooth welding. Our new 3 D laser makes it possible to manufacture difficult and sensitive applications faster and with even better quality. Besides laser subcontracting, we also offer related product development and assembly services. For a cost-effective approach for high-volume production, we aim to achieve highly optimized and dedicated processes. Laser cutting offers high accessibility through flexible software and, with the use of modern software, the cutting process can be specialized and tailored to the customer’s requirements.

Besides the construction of test and production equipment, the company Sigel plant GmbH also offers pure mechanical services. In our modern production machines, we produce only prototypes but also small series up to a lot size of 500 pieces.

Our company was founded in 2004 and has since been in a strong growth phase. This is thanks to the efficient interaction of many years of experience in the development and design of technical articles on the one side and the rich experience in the field of tool making for plastic injection products on the other side We are a multinational company (German-Serb) and provide our customers in the European market, a detailed service program from design to production. According to our company philosophy, we try as a young and experienced company to always be our claim with respect to training, quality development and use of the latest technology needs.

We would like to present our small and humble company who is doing business in CNC turning parts as well as plastic and rubber injection molding, manufacturing. We have needs to develop and growth in spite of difficult times. Our geographical position allows us so many benefits in production ,storage and distributing. We own 1000m2 warehouse and five machines they occupy 300m2 and 300m2 of office space. As far as production is concerned we could expand the production facility or use the rest of the space for warehouse purposes. We were considering the possibilities of production for foreign markets with the help of partners and achive common interest.

We are KOL-POL Company from Poland and provide top class manual, automatic and half- automatic services like: assembly all kinds (example: assembly of connectors for automobile industry, assembly of transmission belts and chains), outsourcing, refinement, sorting, soldering, visual checking, sticking, packaging (example: CD, DVD's) , labeling and transport. We cooperate with world known company's from automobile, connection, phonographic, machine and publishing industry from Germany, Denmark, Holland. Our services fulfill all requirements of Quality Certificates ISO 9001:2000, ISO/TS 16949 and offer competitive prices.

Preciflex service engineering is more than 25 years of expertise in CNC machining, pre-finished machine parts and function-ready modules. As a privately owned, medium-sized company, we produce approximately 25 employees on highly automated manufacturing systems. Our core competencies CNC milling and CNC turning, we are constantly developing. Activities, we are in the areas of drive technology, medical technology, aerospace, fluid power and general engineering. We produce according to your specifications and deadlines, with maximum quality and precision. Through our network of qualified partners we can offer all galvanic and paint and powder coated surfaces.

.

In terms of painting and refining small parts, such as pens and fountain pens, lipsticks and mascara, medical instruments we are setting new standards as a company. Our strengths lie in providing individually tailored advice, our high demands with respect to design and technology and uncompromising implementation of new ideas. Of course, we can also undertake the print, grinding and polishing, turning and milling and the final assembly of your product - that is what we understand by a comprehensive service. Manufacturers of brand writing implements and cosmetics across Europe rely on the accuracy of our work.