Versatility - through years of experience and openness to new ideas. Today MOUNTAIN METAL OHG was founded in 1980 by Mr. Alfons Berg as a sole proprietorship. In 1994 the opening of a branch factory in Oberwiehl and thus the expansion of the power spectrum in sheet metal processing. The establishment of a partnership made in 1999 by the introduction of the individual enterprise and the participation of Mr Andreas Berg, who since 1993 has been an employee of the company. Managing Partners are Alfonso and Andreas Berg. Dedicated and technically skilled staff, supported by a powerful technical equipment enable quality and on-time reliable results that meet the individual requirements of our customers. With the sum of our experience of over 30 years, creativity and flexibility, we develop optimized overall and advanced detail solutions. Robot Welding Welding Welding Robot welding welded constructions sheet metal forming sheet metal processing milling turning machining sheet metal structures large milling parts assemblies burnouts combustion engine burning operation Abkantarbeiten cut profiles industry profiles structural steel welding welding TIG MIG MAG Stud Welding Drawn Arc Capacitor discharge machining stainless steel engineering tool steel plasma cutting plasma system plasma cutting parts sheet steel processing 16Mo3 Hardox 1.4301 1.4571 1.4404

We are company with family traditon. The most important thing for us is quality of our products and ofcourse satisfaciton of buyers. In our machin park we have: -AMADA LASER (which is up to all requirements of today's market) We are using two different lasers. One only for inox/aluminium and second just for steel. -AMADA PUNCHING MACHINE VIPROS 368 KING (One of the best punching machine on the market, with extream precision and speed whis is up to all tasks. And have 33 Tons of preassure. -AMADA BENDING MACHINE ( Our machine have 8 AXIS so there is nothing we can't produce) WELDING (We are welding all materials INOX/ALUMINIUM/STEEL with TIG and MIG/MAG Procedure) As a company we like new challanges. We are able to produce all kinds of products from start to their final look. We are always trying to make the best for our customers. Mail: lukamarkun@inoxsystems.si Tel: +386 70 896 933

Our production profile Our \u200b\u200bproduction range includes laser cutting, punching and bending parts on housing, chassis, racks and mounting housing raw materials we processed sheets.: Steel --- maximum sheet density 5.0 mm Aluminum --- maximum sheet density 4.0 mm Brass --- maximum sheet thickness 3.0 mm Copper --- maximum sheet thickness 4.0 mm Stainless steel --- maximum sheet density 2.5 mm Standard parts: Welding studs Einpressnormteile (automatic placement) Blind rivets Surfaces: Powder coating Galvanic surfaces Screen printing Laser marking The manufactured parts we process on behalf of customers together with purchased parts to mechanical systems as well as electronic and electrical Komponenten.Projektgebunden we provide complete control cabinets and switchboards ago. We offer from the region 10365 Berlin following technology to: bending, folding, punching, laser cutting and many more We carry out: CNC laser cutting and punching CNC punching CNC bending Standard partial assembly CNC stud welding TOX Clinching Welding (spot, MIG-MAG, TIG and Co2)

As a family business, Stil Textil was founded in 1997 in Istanbul. The founders of the company later realized the great opportunities that the market for laser processing offers and as a result, the current company Stilteks Metal was founded in 2012 at its current location in Beylikdüzü. Thanks to the high quality of its products and services, the company is ISO 9001 certified since the first year after its founding. As the amount of the orders were rising, the company remained on the course of growth. Today Stilteks Metal owns a strong machine park consisting of 3 laser cutting machines, 3 press brakes, tube presses, milling machines and welding machines in an area of 1700 m2 Today Stilteks Metal with its experienced team provides support to its partners in various industries from automotive to construction industry. We create orders according to the wishes of our customers and advise them with our know-how during the entire process of the production. The company offers services such as laser cutting, bending, milling, welding and assembly.

Mey Maschinenbau Prien has been designing, producing and optimizing precision mechanical OEM products for a wide range of industries for more than 50 years. Our team of more than 200 employees will implement your ideas at our three facilities. Our headquarters are in Prien am Chiemsee, while our other production facilities are in Nyúl and Győr in Hungary. This allows us to achieve an optimum cost mix, optimize the manufacturing of your product and pass the potential savings straight on to you. We always strive to act personally, conscientiously and flexibly, whether we are working with our clients or amongst our colleagues. These values guide our way of working and the resulting quality is reflected in your products.

Well-known customers worldwide rely on the high quality and best standards of Haslach group. From the company's history out Haslach has a deep understanding and knowledge of the materials used. This extensive experience is rooted in the minds of our more than 200 employees - and we are proud of it! For a successful company are good employees, each and everyone is looking for a specialist in the field. So it creates the Haslach group regularly to set new standards in sheet metal, steel, stainless steel / aluminum and composite materials technology. Company founder Helmut Haslach makes now with his 30 years of experience as general manager for strategic decisions in the company. Since 1999, supported by his daughter Marita Haslach-Then. A second generation graduate economist for Commercial Affairs With over management in 2005, she is responsible for staff development, purchasing, organization and investment. A year later, Jürgen was then appointed as the third manager who drives forward the innovative, highly complex designs. The Haslach group has for many years from their own apprentices. We are a qualified training company, and an intensive youth development is very important to us.

The company was founded in 1959 as the metal goods factory H. and K. Heinz oHG and adopted by the thin sheet metal Eschenburg 1985. 1987 was converted into a limited company under the leadership of managing director Klaus Schmidt In our modern equipped operating we work Steel and stainless steel as well as brass and aluminum. What is your part? We manufacture your parts according to drawings or samples, from 0.5 to 4 mm in thickness in sizes up to 1,500 x 3,000 mm. Prompt. Precise. Perfect. For surface treatments, we've been working together for many years with reputable partners. Our company stands for quality. For accurate and flawless order processing, we are known. See for yourself and you will find that we have promised you too much. We are pleased to add business relations with you. We have the ideal techniques for small, medium and large series. In high quality. Fast, inexpensive and very flexible. Even if tomorrow a prototype is needed.

Innovation in sheet metal production Martech GmbH specializes in sheet metal parts and complex welded structures in chrome steel, aluminum and steel with certified welders according to SN EN 287-1 / 9606-2 / DIN 3834 with its own welding engineer Our own engineering has the most modern 3D CAD systems to efficiently process customer needs, our services range up to the strength calculations of the components. Small parts of a few millimeters and material thicknesses of 0.2 - 30mm up to large constructions of max. 6.3 tons - lot sizes from 1 to thousands Thanks to our modern machine park (automated combination machine TruMatic 7000, latest flat laser technology Trumpf FIBER 5040 6kW 4 x 2 m automatically connected to the sheet metal storage and a Bystronic water jet system 3 x 1.5 m) and our sheet metal storage with up to 1,200 tons of sheet metal (stainless steel, aluminum and Steel in all qualities) we guarantee the shortest delivery times. Many long-standing customers from all areas of industry, pharmaceuticals, medical, defense, aviation, food technology, machine and vehicle construction are convinced of our services, high quality and competitive prices. Processing options: - Flat laser 4x2m - Combined processing 3x1.5m - laser welding - bend up to 4m and 320 to - Profile milling machine up to 3.5m - 3D CAD systems - Press-in fixture HAEGER Laser engraving machine - water jet system - pre-assembly - assembly production - prototype construction - series production - Surface treatments with partner companies

Manufacturer of assemblies, sub-assemblies and single or serial parts from steel, aluminum and stainless steel for domestic, commercial and industrial use. Automatic Laser and plasma cutting machine Automatic Punching presses Automatic Sheet metal bending presses - Abkant Milling and turning machines Sheet metal rolling machine Welding machines (Tig, Mig-Mag, MMA) Bohrwerk Band saw Spot welding machine Sandblasting Electrostatic powder coating

Saku Metall Allhanke Tehas AS provides subcontracting services, specializing in the manufacturing of sheet metal assemblies with integrated technologies based on customers' drawings and requirements. With all key production processes handled in-house, we help manufacturers enhance supply chain efficiency by reducing delivery times and minimizing quality risks. Our in-house production processes include development, cutting, bending, welding, painting, and assembly, ensuring a seamless and reliable manufacturing experience tailored to your needs.

We bring metal into shape! Your specialist for metalworking & production of complete assemblies About us: We face many different challenges every day. Our range of services ranges from classic sheet metal processing to the production of complex components and assemblies as well as the production of individual components. Custom-made products and individual solutions round off our capabilities. Whether you are a craftsman or a bulk buyer – thanks to our versatility, we are able to meet everything according to customer requirements.

For over 60 years, Neuhaus Metallproduktion has stood for quality, technical precision and innovative solutions. We offer custom-made metal components — from individual production to series production. Our production covers the entire process, from idea to implementation, and combines cutting-edge technology with comprehensive know-how. Thanks to CNC-controlled and tool-based processes, we can react flexibly to individual requirements. An experienced team and decades of expertise in metal processing form the basis of our performance. Together with our customers, we rely on precise, economical and timely solutions.

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services. For our national and international customers, we manufacture complex parts on the following presses: - Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300) - Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500), - Fine blanking presses from 1,600 kN to 3,200 kN, - Pressing machine to Dm 900 x 5 mm - Press brakes up to 1,500 mm long Materials / Materials: Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals such as aluminum, copper, bronze and brass, and substance capable plastics. Sheet thickness: 0.05 mm - 10.0 mm Coil: 300 mm x 10 mm and 1000 mm x 8 mm Product Line / products: Fastening systems for photovoltaic systems such as roof hooks, shielding, Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves, Contacts, discs, covers, clamps, braces, disc springs, angles and gears Toolmaking The following services offered by our professional expert toolmaking: - Project development to series production - Tool design - Prototype production - Construction of composite tools, drawing tools, stamping tools, bending tools, Fine-cut and cutting tools as well as devices Subsequent processing - Vibratory grinding, brush deburring, drums, tape loops with automatic feed - Heat treatment - all standard methods (inter-stage hardening, Nitriding, Hardening, and Nitrocarburizinga) Surface Finishing / Surface coating - Powder coating, KTL, painting - Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing) Assembly production As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly. - Inert gas welding (TIG / MIG / MAG) - Robot welding - Stud Welding - Spot and projection welding - Pressure joining (Clinching / clinching) - Riveting, caulking, gluing

1. A bit of history - 2017 Bledar Kthupi graduated in engineering. Electronics at the Polytechnic of Tirana in 1998, after approximately 23 years of experience as a turner, miller, reamer and production manager, in various metalworking companies, with the technical and economic support of Suela Llalla, as administrative manager they gave life to the BIKS. - 2018 BIKS offers consultancy service for precision mechanical parts for some of its customers who mainly deal with carpentry. - 2019 BIKS begins to become a supplier by acquiring, developing and supplying orders or finished details in addition to metalworking consultancy. - 2020 BIKS signs a collaboration agreement with Marca&Volta srl for which it will deal by offering a technical-commercial consultancy service for the orders to be outsourced. - 2021 Bledar acquires 10% of the shares of Marca&Volta srl and BIKS srl confirms and improves the performance of its operations. - 2022 Bledar becomes production manager of Marca&Volta and BIKS from January 2022 is entitled to take advantage of 100 hours of machine tools at the Marca&Volta workshop. Erald Miraka began his career at BIKS as an engineer and is still Junior Project Manager and Technical Sales Assistant. - 2023 Begins the collaboration with BIKS, Arlinda Nerguti who deals with Back-Office and market research. - 2024 BIKS is looking to strengthen its results. 2. Mission Biks wants to be the trusted supplier of CNC machined parts, small, medium and large carpentry, of equipment designed and manufactured as needed but above all it wants to be your solution provider. Biks believes in the relationship of trust and mutual growth with the customer-partner, basing the relationship on the use of all its technical-commercial baggage and its professional ethics. 3. BIKS SRL Bledar Kthupi - Ceo-founder // bledar@biks.it - +39 340 905 7248 Suela Llalla - Financial & Logistic // invoice@biks.it - +39 327 079 4037 Erald Miraka - Technical & Dev. // em@biks.it - +355 68 805 5845 Arlinda Nerguti – Back-Office, R&D // linda@biks.it - +39 327 079 4037 4. Short-term goals The commissioning of the platform: MACHISTE.COM which will allow customers to have a guaranteed quote within 48 hours in 75% of cases. The commissioning of the new headquarters with approximately 500m2 indoors and 300m2 uncovered. The completion of the procedures for the acquisition of ISO9001. 5. Why choose BIKS • With Biks you can improve the times and costs of your supply. • With Biks you would have a single interlocutor even for your most complex projects. • Maximum confidentiality of all drawings and projects. • Clear and agreed work cycle. • Agreed technical solutions for every need. • Promptness and punctuality in communications and deliveries. We can produce the simple washer, the gear wheel with induction hardening and 3D profile control and steam seal rings for gas turbines. Obviously, the simpler the product, the easier it is that the possible customer can find it on his own without having to pay BIKS. The more complicated and complex it is, the more likely BIKS is to become the best solution as it is the turnkey supplier of a quality product. 6. In what we are able We are able to supply Turned parts, prototypes, small series or mass production. Minimum diameter 5mm, maximum diameter 1600mm for 18,000mm length. Milled parts in soft steel, stainless steel, aluminum and plastic using 3, 4 and 5 axis milling machines with Maximum capabilities 2000x2000x15.000 Sheet metal parts, cutted by laser, by plasma or by waterjet, punched, bent or calendered. welded parts from Tig Mig or other technologies. BIKS S.R.L. Sede Legale: Via Paolo Gerolamo Brusco 1/4, 17100 - Savona (SV), Italy E-mail: info@biks.it Website: http://www.biks.it VAT/P.Iva : 01867890095

“From your drawing to to the end product! “With this route, we meet all customer requirements in a modern way. Some areas of construction, procurement of raw materials and a very high level of vertical integration are our plus. Over decades, we have acquired many years of experience in refining the components in a wide variety of surface qualities and assembling individual components. Thanks to a large network of suppliers and service providers, we have very good economic prices and strive for very fast delivery times. This is the basis for long-term cooperation with well-known companies from a wide range of areas of mechanical and plant engineering. As a modern company, we are happy to use additional requirements in the area of processing orders for our own development.

Since 1991, Torgelower Metallwaren GmbH has stood for quality and know-how in the field of metal processing and tool making. Based in the heart of Western Pomerania, we were able to utilize the region's underestimated potential and develop into an internationally active company. We offer our industrial customers from all over the world the highest standards in the fields of CNC punching, conventional punching, welding in all common processes, CNC milling, steel construction and product packaging. As a certified company, we were able to convince clients from the automotive industry, environmental technology, construction, apparatus engineering and electrical engineering of our quality work with punctuality and maximum precision and have been counting them among our satisfied customer base ever since. In addition to modern technology and equipment, the qualification and commitment of our employees are a central part of our company policy. The highly motivated engineers, foremen and skilled workers work as a team to meet the high demands of our customers. We ensure 100% quality of our products through targeted personnel development and consistent quality management. We offer them individual, project-oriented advice through to technical implementation. In line with your requirements, we provide you with holistic products with maximum production accuracy and consistent quality. The continuous expansion of our product range requires continuous modernization of the company's own machinery and production areas. By expanding our storage system into a modern high-bay warehouse, we can store the appropriate materials, semi-finished products and finished products on 460 pallet spaces and thus respond flexibly to our customer requirements. We responded to the increasing demands of our foundry customers with the inauguration of our steel building in 2009. The new production area of 1,200 square meters and the corresponding equipment enable us to produce and process components weighing up to 20 tons. This makes us one of the few companies in the region that can produce in these dimensions. With passion for our work and many years of experience, we take on any task in the metal sector.

Marano Lamiere was founded in 1980 as an artisan company for the processing of sheet metal for industrial use. After 4 decades in which the company stood out and established itself in the area with high quality products, in 2019 the physiological generational change took place: Andrea Gatti and Massimiliano Canali, after having gained two decades of experience on the front line, took over the company . Thanks to targeted investments, new technologies and cutting-edge systems, they transform what was a family-run business into an SME with more than 30 active branches. In 2022 Marano Lamiere grows again by acquiring a new headquarters, developing production across 3 factories for a total of 4,000 m2 covered in the heart of Marano sul Panaro. Specialized in medium-light carpentry, it deals with sheet metal processing and tubular carpentry with laser cutting up to 30 mm 4×2 MT, bending up to 4 MT, CNC mechanical processing and separate welding departments for stainless steel, iron and aluminium. The company starts from the design on behalf of the customer, with 2D and 3D software, up to the delivery of the finished piece, managing all types of surface treatments. Specialized in the processing of stainless steel with excellent finishes such as satin, polishing or micro-peening, it can be considered a consolidated and strategic supplier for many companies in what is defined as the Packaging Valley. Marano Lamiere can satisfy different realities, from ceramic equipment to packaging, food packaging, biomedical packaging, the logistics sector and much more..

The metal stamping is the activity on which it was founded Adveco, so that our company boasts 50 years of experience in this area, creating internally diverse machining, as deburring, chamfering, countersinking, threading, assembly and possible packaging with customer's logo. With a constantly updated vehicle fleet to the needs and market changes, Adveco today has thirty eccentric presses with force from 50 to 600 tons, press brakes and shears CNC. In recent years, Adveco printed cold both standard pieces of design for the most diverse areas of application, including the main surely construction, plumbing, automotive, home appliances, lighting and objects of all kinds. Around the shearing process is carried out in compliance with the UNI ENI ISO 9001, ensuring maximum customer satisfaction, both for the high quality of particular products, which for speed and flexibility in production.For this reason, Adveco is able to produce both small and large batches, depending on the specific needs of the customer. The extensive experience in the cutting of metals, ferrous and non, also allowed us to forge a long-term collaboration with serious and reliable partner, bringing to propose a complete service, from design and construction of molds to surface treatments such as hardening, welding, painting and galvanizing.